DOI QR코드

DOI QR Code

Self-compacting light-weight concrete; mix design and proportions

  • Vakhshouri, Behnam (Centre for Built Infrastructure Research (CBIR), Faculty of Engineering and Information Technology (FEIT), University of Technology Sydney (UTS)) ;
  • Nejadi, Shami (Centre for Built Infrastructure Research (CBIR), Faculty of Engineering and Information Technology (FEIT), University of Technology Sydney (UTS))
  • 투고 : 2015.08.23
  • 심사 : 2016.02.13
  • 발행 : 2016.04.10

초록

Utilization of mineral and chemical admixtures in concrete technology has led to changes in the formulation and mix design in recent decades, which has, in turn, made the concrete stronger and more durable. Lightweight concrete is an excellent solution in terms of decreasing the dead load of the structure, while self-compacting concrete eases the pouring and removes the construction problems. Combining the advantages of lightweight concrete and self-compacting concrete is a new and interesting research topic. Considering its light weight of structure and ease of placement, self-compacting lightweight concrete may be the answer to the increasing construction requirements of slender and more heavily reinforced structural elements. Twenty one laboratory experimental investigations published on the mix proportion, density and mechanical properties of lightweight self-compacting concrete from the last 12 years are analyzed in this study. The collected information is used to investigate the mix proportions including the chemical and mineral admixtures, light weight and normal weight aggregates, fillers, cement and water. Analyzed results are presented in terms of statistical expressions. It is very helpful for future research to choose the proper components with different ratios and curing conditions to attain the desired concrete grade according to the planned application.

키워드

참고문헌

  1. ACI-213R-03 (2003), "Guide for Structural Lightweight-Aggregate Concrete", American Concrete Institute.
  2. Andic-Cakir, O. and Hizal, S. (2012), "Influence of elevated temperatures on the mechanical properties and microstructure of self consolidating lightweight aggregate concrete", Constr. Build. Mater., 34, 575-583. https://doi.org/10.1016/j.conbuildmat.2012.02.088
  3. Andic-cakir, O., Yogurtcu, E., Yazici, S. and Ramyar, K. (2009), "Self-compacting lightweight aggregate concrete: design and experimental study", Mag. Concrete Res., 61(7), 519-527. https://doi.org/10.1680/macr.2008.00024
  4. Anwar, M.S., Pramono, A.W., Judarta, V.I. and Manaf, A. (2012), "The role of pumice in self-compacting lightweight aggregate concrete manufacture", Asian Tran. Basic Appl. Sci., 4, 14-20.
  5. Aslani, F. (2015), "Creep behaviour of normal-and high-strength self-compacting concrete", Struct. Eng. Mech., 53(5), 921-938. https://doi.org/10.12989/sem.2015.53.5.921
  6. Bilir, T., Gencel, O. and Topcu, I.B. (2015), "Properties of mortars with fly ash as fine aggregate", Constr. Build. Mater., 93, 782-789. https://doi.org/10.1016/j.conbuildmat.2015.05.095
  7. Bogas, J.A., Gomes, A. and Pereira, M. (2012), "Self-compacting lightweight concrete produced with expanded clay aggregate", Constr. Build. Mater., 35, 1013-1022. https://doi.org/10.1016/j.conbuildmat.2012.04.111
  8. Bymaster, J. (2012), Prestress losses in lightweight self-consolidating concrete, Masters Abstracts International.
  9. Choi, Y.W., Kim, Y.J., Shin, H.C. and Moon, H.Y. (2006), "An experimental research on the fluidity and mechanical properties of high-strength lightweight self-compacting concrete", Cement Concrete Res., 36(9), 1595-1602. https://doi.org/10.1016/j.cemconres.2004.11.003
  10. Domone, P. (2006), "Self-compacting concrete: An analysis of 11 years of case studies", Cement Concrete Compos., 28(2), 197-208. https://doi.org/10.1016/j.cemconcomp.2005.10.003
  11. Dymond, B.Z. (2007), Shear strength of a PCBT-53 girder fabricated with lightweight, self-consolidating concrete, Virginia Polytechnic Institute and State University.
  12. EFNARC, F. (2002), "Specification and Guidelines for Self-Compacting Concrete", Farnham, Surrey GU9 7EN, UK.
  13. EN-206-1 (2000), "Specification, performance, production and conformity", European Standard, 72.
  14. Gencel, O., Koksal, F., Ozel, C. and Brostow, W. (2012), "Combined effects of fly ash and waste ferrochromium on properties of concrete", Constr. Build. Mater., 29, 633-640. https://doi.org/10.1016/j.conbuildmat.2011.11.026
  15. Gencel, O., Ozel, C., Brostow, W. and Martinez-Barrera, G. (2011), "Mechanical properties of selfcompacting concrete reinforced with polypropylene fibres", Mater. Res. Innov., 15(3), 216-225. https://doi.org/10.1179/143307511X13018917925900
  16. Guneyisi, E., Gesoglu, M. and Booya, E. (2012), "Fresh properties of self-compacting cold bonded fly ash lightweight aggregate concrete with different mineral admixtures", Mater. Struct., 45(12), 1849-1859. https://doi.org/10.1617/s11527-012-9874-6
  17. Hubertova, M. and Hela, R. (2007), "The effect of metakaolin and silica fume on the properties of lightweight self consolidating concrete", ACI Special Publication, 243.
  18. Hwang, C.L. and Hung, M.F. (2005), "Durability design and performance of self-consolidating lightweight concrete", Constr. Build. Mater., 19(8), 619-626. https://doi.org/10.1016/j.conbuildmat.2005.01.003
  19. Illidge, F.B. (2010), "Acoustic emission techniques and cyclic load testing load testing for integrity evaluation of self-compacting normal and self-compacting", PhD Thesis, University of South Carolina, USA.
  20. Juradin, S., Baloevic, G. and Harapin, A. (2012), "Experimental testing of the effects of fine particles on the properties of the self-compacting lightweight concrete", Adv. Mater. Sci. Eng., 2012, Article ID 398567, 8.
  21. Kaffetzakis, M. and Papanicolaou, C. (2012), Mix Proportioning Method for Lightweight Aggregate SCC (LWASCC) Based on the Optimum Packing Point Concept, Innovative Materials and Techniques in Concrete Construction, Springer.
  22. Kim, Y.J., Choi, Y.W. and Lachemi, M. (2010), "Characteristics of self-consolidating concrete using two types of lightweight coarse aggregates", Constr. Build. Mater., 24(1), 11-16. https://doi.org/10.1016/j.conbuildmat.2009.08.004
  23. Kobayashi, K. (2001), "Characteristics of self-compacting concrete in fresh state with artificial light-weight aggregate", J. Soc. Mater. Sci., 50(9), 1021-1027. https://doi.org/10.2472/jsms.50.1021
  24. Koehler, E.P. and Fowler, D.W. (2007), "ICAR Project 108: Aggregates in Self-Consolidating Concrete. Aggregates Foundation for Technology, Research, and Education (AFTRE)", International Centre for Aggregates Research (ICAR), The University of Texas at Austin.
  25. Koksal, F., del Coz, D., Juan, J., Gencel, O., Alvarez, R. and Felipe, P. (2013), "Experimental and numerical analysis of new bricks made up of polymer modified-cement using expanded vermiculite", Comput. Concrete, 12(3), 319-335. https://doi.org/10.12989/cac.2013.12.3.319
  26. Liu, X., Ye, G., De Schutter, G. and Yuan, Y. (2013), "Simulation of the microstructure formation in hardening self-compacting cement paste containing limestone powder as filler via computer-based model", Mater. Struct., 46(11), 1861-1879. https://doi.org/10.1617/s11527-013-0026-4
  27. Maghsoudi, A.A., Mohamadpour, S. and Maghsoudi, M. (2011), "Mix design and mechanical properties of self compacting light weight concrete", Int. J. Civil Eng., 9(3), 230-236.
  28. Mazaheripour, H., Ghanbarpour, S., Mirmoradi, S. and Hosseinpour, I. (2011), "The effect of polypropylene fibers on the properties of fresh and hardened lightweight self-compacting concrete", Constr. Build. Mater., 25(1), 351-358. https://doi.org/10.1016/j.conbuildmat.2010.06.018
  29. Persson, B. (2006), "On the internal frost resistance of self-compacting concrete, with and without polypropylene fibres", Mater. Struct., 39(7), 707-716. https://doi.org/10.1617/s11527-006-9116-x
  30. Shi, C. and Wu, Y. (2005), "Mixture proportioning and properties of self-consolidating lightweight concrete containing glass powder", ACI Mater. J., 102(5), 355.
  31. Soutsos, M., Turu'allo, G., Owens, K., Kwasny, J., Barnett, S. and Basheer, P. (2013), "Maturity testing of lightweight self-compacting and vibrated concretes", Constr. Build. Mater., 47, 118-125. https://doi.org/10.1016/j.conbuildmat.2013.04.045
  32. TS-2511 (1977), "Mix Design for Structural Lightweight Aggregate Concrete", Turkish Standards Institution TSI, Ankara, Turkey.
  33. Vakhshouri, B. and Nejadi, S. (2015), "Predicition of compressive strength in light-weight self-compacting concrete by ANFIS analytical model", Arch. Civil Eng., 61(2), 53-72. https://doi.org/10.1515/ace-2015-0014
  34. Vakhshouri, B. and Nejadi, S. (2016), "Mix design of light-weight self-compacting concrete", Case Stud. Constr. Mater., 4, 1-14. https://doi.org/10.1016/j.cscm.2015.10.002
  35. Wang, H.Y. (2009), "Durability of self-consolidating lightweight aggregate concrete using dredged silt", Constr. Build. Mater., 23(6), 2332-2337. https://doi.org/10.1016/j.conbuildmat.2008.11.006
  36. Ward, D. (2010), Performance of prestressed double-tee beams cast with lightweight self-consolidating concrete, University of arkansas.

피인용 문헌

  1. Compressive strength and mixture proportions of self-compacting light weight concrete vol.19, pp.5, 2016, https://doi.org/10.12989/cac.2017.19.5.555
  2. Strength degeneracy of LWAC and flexural behavior of LWAC members after fire vol.20, pp.2, 2016, https://doi.org/10.12989/cac.2017.20.2.177
  3. Flexural tests on two-span unbonded post-tensioned lightweight concrete beams vol.72, pp.5, 2019, https://doi.org/10.12989/sem.2019.72.5.631
  4. Experimental Evaluation of Untreated and Pretreated Crumb Rubber Used in Concrete vol.11, pp.5, 2021, https://doi.org/10.3390/cryst11050558