Browse > Article
http://dx.doi.org/10.12989/sem.2016.58.1.143

Self-compacting light-weight concrete; mix design and proportions  

Vakhshouri, Behnam (Centre for Built Infrastructure Research (CBIR), Faculty of Engineering and Information Technology (FEIT), University of Technology Sydney (UTS))
Nejadi, Shami (Centre for Built Infrastructure Research (CBIR), Faculty of Engineering and Information Technology (FEIT), University of Technology Sydney (UTS))
Publication Information
Structural Engineering and Mechanics / v.58, no.1, 2016 , pp. 143-161 More about this Journal
Abstract
Utilization of mineral and chemical admixtures in concrete technology has led to changes in the formulation and mix design in recent decades, which has, in turn, made the concrete stronger and more durable. Lightweight concrete is an excellent solution in terms of decreasing the dead load of the structure, while self-compacting concrete eases the pouring and removes the construction problems. Combining the advantages of lightweight concrete and self-compacting concrete is a new and interesting research topic. Considering its light weight of structure and ease of placement, self-compacting lightweight concrete may be the answer to the increasing construction requirements of slender and more heavily reinforced structural elements. Twenty one laboratory experimental investigations published on the mix proportion, density and mechanical properties of lightweight self-compacting concrete from the last 12 years are analyzed in this study. The collected information is used to investigate the mix proportions including the chemical and mineral admixtures, light weight and normal weight aggregates, fillers, cement and water. Analyzed results are presented in terms of statistical expressions. It is very helpful for future research to choose the proper components with different ratios and curing conditions to attain the desired concrete grade according to the planned application.
Keywords
self-compacting light weight concrete; compressive strength; mix proportion; admixtures; fillers; aggregates;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 ACI-213R-03 (2003), "Guide for Structural Lightweight-Aggregate Concrete", American Concrete Institute.
2 Andic-Cakir, O. and Hizal, S. (2012), "Influence of elevated temperatures on the mechanical properties and microstructure of self consolidating lightweight aggregate concrete", Constr. Build. Mater., 34, 575-583.   DOI
3 Andic-cakir, O., Yogurtcu, E., Yazici, S. and Ramyar, K. (2009), "Self-compacting lightweight aggregate concrete: design and experimental study", Mag. Concrete Res., 61(7), 519-527.   DOI
4 Anwar, M.S., Pramono, A.W., Judarta, V.I. and Manaf, A. (2012), "The role of pumice in self-compacting lightweight aggregate concrete manufacture", Asian Tran. Basic Appl. Sci., 4, 14-20.
5 Aslani, F. (2015), "Creep behaviour of normal-and high-strength self-compacting concrete", Struct. Eng. Mech., 53(5), 921-938.   DOI
6 Bilir, T., Gencel, O. and Topcu, I.B. (2015), "Properties of mortars with fly ash as fine aggregate", Constr. Build. Mater., 93, 782-789.   DOI
7 Bogas, J.A., Gomes, A. and Pereira, M. (2012), "Self-compacting lightweight concrete produced with expanded clay aggregate", Constr. Build. Mater., 35, 1013-1022.   DOI
8 Bymaster, J. (2012), Prestress losses in lightweight self-consolidating concrete, Masters Abstracts International.
9 Choi, Y.W., Kim, Y.J., Shin, H.C. and Moon, H.Y. (2006), "An experimental research on the fluidity and mechanical properties of high-strength lightweight self-compacting concrete", Cement Concrete Res., 36(9), 1595-1602.   DOI
10 Domone, P. (2006), "Self-compacting concrete: An analysis of 11 years of case studies", Cement Concrete Compos., 28(2), 197-208.   DOI
11 Dymond, B.Z. (2007), Shear strength of a PCBT-53 girder fabricated with lightweight, self-consolidating concrete, Virginia Polytechnic Institute and State University.
12 EFNARC, F. (2002), "Specification and Guidelines for Self-Compacting Concrete", Farnham, Surrey GU9 7EN, UK.
13 EN-206-1 (2000), "Specification, performance, production and conformity", European Standard, 72.
14 Gencel, O., Koksal, F., Ozel, C. and Brostow, W. (2012), "Combined effects of fly ash and waste ferrochromium on properties of concrete", Constr. Build. Mater., 29, 633-640.   DOI
15 Gencel, O., Ozel, C., Brostow, W. and Martinez-Barrera, G. (2011), "Mechanical properties of selfcompacting concrete reinforced with polypropylene fibres", Mater. Res. Innov., 15(3), 216-225.   DOI
16 Guneyisi, E., Gesoglu, M. and Booya, E. (2012), "Fresh properties of self-compacting cold bonded fly ash lightweight aggregate concrete with different mineral admixtures", Mater. Struct., 45(12), 1849-1859.   DOI
17 Hubertova, M. and Hela, R. (2007), "The effect of metakaolin and silica fume on the properties of lightweight self consolidating concrete", ACI Special Publication, 243.
18 Hwang, C.L. and Hung, M.F. (2005), "Durability design and performance of self-consolidating lightweight concrete", Constr. Build. Mater., 19(8), 619-626.   DOI
19 Juradin, S., Baloevic, G. and Harapin, A. (2012), "Experimental testing of the effects of fine particles on the properties of the self-compacting lightweight concrete", Adv. Mater. Sci. Eng., 2012, Article ID 398567, 8.
20 Illidge, F.B. (2010), "Acoustic emission techniques and cyclic load testing load testing for integrity evaluation of self-compacting normal and self-compacting", PhD Thesis, University of South Carolina, USA.
21 Kaffetzakis, M. and Papanicolaou, C. (2012), Mix Proportioning Method for Lightweight Aggregate SCC (LWASCC) Based on the Optimum Packing Point Concept, Innovative Materials and Techniques in Concrete Construction, Springer.
22 Kim, Y.J., Choi, Y.W. and Lachemi, M. (2010), "Characteristics of self-consolidating concrete using two types of lightweight coarse aggregates", Constr. Build. Mater., 24(1), 11-16.   DOI
23 Kobayashi, K. (2001), "Characteristics of self-compacting concrete in fresh state with artificial light-weight aggregate", J. Soc. Mater. Sci., 50(9), 1021-1027.   DOI
24 Koehler, E.P. and Fowler, D.W. (2007), "ICAR Project 108: Aggregates in Self-Consolidating Concrete. Aggregates Foundation for Technology, Research, and Education (AFTRE)", International Centre for Aggregates Research (ICAR), The University of Texas at Austin.
25 Koksal, F., del Coz, D., Juan, J., Gencel, O., Alvarez, R. and Felipe, P. (2013), "Experimental and numerical analysis of new bricks made up of polymer modified-cement using expanded vermiculite", Comput. Concrete, 12(3), 319-335.   DOI
26 Liu, X., Ye, G., De Schutter, G. and Yuan, Y. (2013), "Simulation of the microstructure formation in hardening self-compacting cement paste containing limestone powder as filler via computer-based model", Mater. Struct., 46(11), 1861-1879.   DOI
27 Shi, C. and Wu, Y. (2005), "Mixture proportioning and properties of self-consolidating lightweight concrete containing glass powder", ACI Mater. J., 102(5), 355.
28 Maghsoudi, A.A., Mohamadpour, S. and Maghsoudi, M. (2011), "Mix design and mechanical properties of self compacting light weight concrete", Int. J. Civil Eng., 9(3), 230-236.
29 Mazaheripour, H., Ghanbarpour, S., Mirmoradi, S. and Hosseinpour, I. (2011), "The effect of polypropylene fibers on the properties of fresh and hardened lightweight self-compacting concrete", Constr. Build. Mater., 25(1), 351-358.   DOI
30 Persson, B. (2006), "On the internal frost resistance of self-compacting concrete, with and without polypropylene fibres", Mater. Struct., 39(7), 707-716.   DOI
31 Soutsos, M., Turu'allo, G., Owens, K., Kwasny, J., Barnett, S. and Basheer, P. (2013), "Maturity testing of lightweight self-compacting and vibrated concretes", Constr. Build. Mater., 47, 118-125.   DOI
32 TS-2511 (1977), "Mix Design for Structural Lightweight Aggregate Concrete", Turkish Standards Institution TSI, Ankara, Turkey.
33 Vakhshouri, B. and Nejadi, S. (2015), "Predicition of compressive strength in light-weight self-compacting concrete by ANFIS analytical model", Arch. Civil Eng., 61(2), 53-72.   DOI
34 Vakhshouri, B. and Nejadi, S. (2016), "Mix design of light-weight self-compacting concrete", Case Stud. Constr. Mater., 4, 1-14.   DOI
35 Wang, H.Y. (2009), "Durability of self-consolidating lightweight aggregate concrete using dredged silt", Constr. Build. Mater., 23(6), 2332-2337.   DOI
36 Ward, D. (2010), Performance of prestressed double-tee beams cast with lightweight self-consolidating concrete, University of arkansas.