• Structural Engineering and Mechanics
• /
• 제17권3_4호
• /
• pp.539-556
• /
• 2004

In this paper, the design, fabrication and characterization of a piezoelectric friction damper are presented. It was sized with the proposed practical procedure to minimize the story drift and floor acceleration of an existing 1/4-scale, three-story frame structure under both near-fault and far-field earthquakes. The design operation friction force in kip was numerically determined to range from 2.2 to 3.3 times the value of the peak ground acceleration in g (gravitational acceleration). Experimental results indicated that the load-displacement loop of the damper is nearly rectangular in shape and independent of the excitation frequency. The coefficient of friction of the damper is approximately 0.85 when the clamping force on the damper is above 400 lbs. It was found that the friction force variation of the damper generated by piezoelectric actuators with 1000 Volts is approximately 90% of the expected value. The properties of the damper are insensitive to its ambient temperature and remain almost the same after being tested for more than 12,000 cycles.

• 전산구조공학
• /
• 제10권4호
• /
• pp.251-265
• /
• 1997

해양계선시스템(offshore mooring system)의 거동을 구분적선형시스템(piecewise-linear system)을 이용하여 분석하였다. 계선시스템의 복원력을 유도하고 거기에 상응하는 근사치 구분적선형시스템의 복원력을 구하여 두 시스템의 복원력을 비교하였다. 다양한 파력 하에서의 계선시스템의 응답거동을 분석하였다. 시스템의 비선형정도 및 매개변수의 영향에 대하여 집중적으로 연구하였다. 시스템의 응답거동의 특성은 포인케어맵(Poincare map)을 통하여 확인하였다. 구분적선형시스템을 이용하여 분석한 결과, 계선시스템은 일반 조화, 열조화 및 복잡한 비선형거동인 chaos를 포함한 다양한 응답거동을 갖음을 알아냈다. 여러 값의 매개변수를 적용하여 시스템의 응답거동에 미치는 영향을 알아냈으며, 매개변수지도를 통하여 응답거동의 영역을 확인하였다.

• Structural Engineering and Mechanics
• /
• 제84권5호
• /
• pp.591-604
• /
• 2022

A gravity wall combined with an anchoring lattice frame (a combined retaining structure) is adopted at a typical engineering site at Dali-Ruili Railway Line China. Where, the combined retaining structure supports a soil deposit covering on different inclined rock slopes. With an aim to investigate and compare the effects of inclined rock slopes on the response of combined retaining structure under seismic excitation, three groups of shaking table tests are conducted. The rock slopes are shaped as planar surfaces inclined at angles of 20°, 30°, and 40° with the horizontal, respectively. The shaking table tests are supplemented by dynamic numerical simulations. The results regarding the horizontal acceleration response, vertical acceleration response, permanent displacement mode, and axial anchor force are comparatively examined. The acceleration response is more susceptible to outer structural profile of combined retaining structure than to inclined angle of rock slope. The permanent displacement decreases when the inclined angle of the rock slope increases within a range of 20°-40°. A critical inclined angle of rock slope exists within a range of 20°-40°, and induces the largest axial anchor force in the combined retaining structure.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.644-651
• /
• 2005

The purpose of this paper is to compare the control effect of toggle brace system having amplifying displacement mechanism with that of conventional brace system when the identical MR damper is applied to each system. The force-displacement and lone-velocity relationships of MR damper are obtained using harmonic load test and the analytical model for MR damper is presented. White noise excitation tests of a single degree of freedom system with MR-toggle brace system and MR-chevron system are conducted and the transfer functions of the systems are compared. Test results show that the control effect of the toggle system is superior to that of the conventional brace system.

• 대한기계학회논문집
• /
• 제18권8호
• /
• pp.1910-1919
• /
• 1994

The nonlinear behavior of continuous structural systems which possess external resonances as well as internal resonances are found be exhibit interesting reponses, arising because of the exhange of energy between the coupled modes. In this paper, the undamped forced vibrations was studied on the effect of primary resonance based on the concept of normal modes. By using the concept of normal mode the stability relation between free and forced vibrations was investigated in case of small exciting force. Numerical results show that the excitation of one unstable mode has a great influence on the response of the other mode but that of one stable mode does not.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.719-724
• /
• 2002

Impact hammer is widely used as a convenient excitation tool in structural modal testing though, little is known about the dynamic characteristics of its impulse mechanism. Transmission of the impulsive force to the structure depends m the dynamic properties of the impact hammer as well as the stiffness of the tip. In this study an improved dynamic model of the impact hammer is proposed with the consideration of structure to be tested. The deformation masses of hammer tip and structure are as well as their contact stiffness. Numerical results show that this model is useful for the prediction of the impulse duration and the condition of rebounce..

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2004년도 가을 학술발표회 논문집
• /
• pp.34-40
• /
• 2004

In this paper, peliminary design procedure of magnetorheological (MR) dampers is developed for controlling the building response induced by seismic excitation. Hysteretic biviscous model which is simple and can describe the hysteretic characteristics of MR damper is used for parametric studies. The capacity of MR damper is determined as a portion of not the building weight but the lateral restoring force. A method is proposed for the optimal placement and number of MR dampers, and its effectiveness is verified by comparing it with the simplified search algorithm. Numerical results indicate that the capacity, number and the placement can be reasonably determined using the proposed design procedure.

• Wind and Structures
• /
• 제4권2호
• /
• pp.147-162
• /
• 2001

This paper presents an analytical method which takes into account the non-linearity of individual members, and discusses some case study results. It also discusses the relationship between member non-elastic behavior and excitation duration, and the relationship between member fracture and overall structure behavior. It is clearly demonstrated that the frame already shows almost unstable behavior due to long-columnization just before the occurrence of a column fracture. Then, a column fracture immediately induces a structural collapse mechanism.

• 소음진동
• /
• 제7권2호
• /
• pp.311-317
• /
• 1997

In this paper the active vibration control system using a linear oscillatory actuator(LOA) is studied to suppress structural vibration. In the LOA, the AC-power-energized armature generates a shift field in an air gap, which produces a oscillating force to the mover in the magnetic field generated by high density permanent magnets. LOA has relatively simple structure with almost maintenance free, compared with a hydraulic actuator. Performance test of the active vibration control system using a LOA is carried out on a steel test structure under base excitation. From this test, it is confirmed that the acceleration level of the test structure is drastically reduced near the resonant region.

• 한국지진공학회논문집
• /
• 제2권2호
• /
• pp.13-22
• /
• 1998

본 연구는 지진격리장치의 일종인 마찰 단진자 시스템(FPS)의 교량에의 적용에 관한 연구이다. FPS에 의하여 지진 격리된 교량과 지진 격리되지 않은 교량의 지진하중 작용시의 응답을 비교하기 위하여 축소모델 교량을 이용한 진동대 실험을 수행하였다. 연구결과, 본 장치를 설치한 경우 지진하중에 대한 지지능력이 향상하는 것으로 나타났다. 또한, 활동면 곡류반경에 의해 조절이 가능한 F.P.S 베어링의 강성은 입력된 kwlsfur의 강도와는 무관하며, 활동면의 마찰계수에 따라 속도가 변화하여 약진시에는 활동면에서의 속도가 작으므로 강진시와 비교하여 지진하중에 의하여 발생하는 마찰력도 감소하게 되었다. 한편 F.P.S 베어링의 마찰특성은 반복된 실험에서도 변화하지 않았고, 영구변형은 약적으로도 작았을 뿐만 아니라 누적되지도 않았다.