• 한국철도학회논문집
• /
• 제17권5호
• /
• pp.342-348
• /
• 2014

차륜과 레일의 접촉은 크리프를 유발한다. 크리프 증가에 따라 크리프력이 선형적으로 증가한다고 가정하는 선형 크리프 이론은 철도차량의 진동이 무한히 발산하는 주행속도인 임계속도를 결정한다. 그러나 실제 크리프력은 일정값에 수렴하며 철도차량의 횡진동은 무한히 증가되지도 않는다. 본 연구에서는 비선형 크리프 이론인 Vermeulen이론, Polach이론, 실제 차륜과 레일의 형상을 고려하여 계산된 줄이론 등을 6 자유도 대차모델에 적용하여 철도차량의 동특성을 검토하였다. 그 결과 철도차량의 진동은 특정 주행속도 이상에서 한계사이클을 만들었으며, 크리프 곡선의 기울기가 클수록 한계사이클이 발생하는 주행속도는 낮아졌다. 또한 한계사이클은 플랜지 접촉으로 인해 그 크기가 제한되는 헌팅현상이 발생됨을 알았다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 춘계학술발표대회 논문집
• /
• pp.83-86
• /
• 2004

The aeroelastic stability analysis of composite bearingless rotors is investigated using a large deflection beam theory in hover. The bearingless rotor configuration consists of a single flexbeam with a wrap-around type torque tube and the pitch links located at the leading edge and trailing edge of the torque tube root. For the analysis of composite bearingless rotors, flexbeam is assumed to be a rectangular section made of laminate. Two-dimensional quasi-steady strip theory and Loewy's aerodynamic theory with the lift deficiency function are used for unsteady aerodynamic computation. The finite element equations of motion for beams are obtained using Hamilton's principle. Numerical results of selected bearingless rotor configurations are obtained for the lay-up of laminae in the flexbeam and pitch links location.

• Wind and Structures
• /
• 제6권1호
• /
• pp.41-52
• /
• 2003

Rain-wind induced vibrations of cables are a challenging problem in the design of cable-stayed bridges. The precise excitation mechanism of the complex interaction between structure, wind and rain is still unknown. A theoretical model that is able to accurately simulate the observed phenomena is not available. This paper presents a mathematical model describing rain-wind induced vibrations as movement-induced vibrations using the quasi-steady strip theory. Both, the vibrations of the cable and the movement of the water rivulet on the cable surface can be described by the model including all geometrical and physical nonlinearities. The analysis using the stability and bifurcation theory shows that the model is capable of simulating the basic phenomena of the vibrations, such as dependence of wind velocity and cable damping. The results agree well with field data and wind tunnel tests. An extensive experimental study is currently performed to calibrate the parameters of the model.

• Advances in nano research
• /
• 제12권4호
• /
• pp.427-440
• /
• 2022

In the present study, the nonlocal strain gradient theory is used to predict the size-dependent buckling and post-buckling behavior of geometrically imperfect nano-scale piezo-flexomagnetic plate strips in two modes of direct and converse flexomagnetic effects. The first-order shear deformation plate theory is used to analyze analytically nano-strips with simply supported boundary conditions. The nonlinear governing equations of equilibrium and associated boundary conditions are derived using the principle of minimum total potential energy with consideration of the von Kármán-type of geometric nonlinearity. A closed-form solution of governing differential equation is obtained, which is easily usable for engineers and designers. To validate the presented formulations, whenever possible, a comparison with the results found in the open literature is reported for buckling loads. A parametric study is presented to examine the effect of scaling parameters, plate slenderness ratio, temperature, the mid-plane initial rise, flexomagnetic coefficient, different temperature distributions, and magnetic potential, in case of the converse flexomagnetic effect, on buckling and post-buckling loads in detail.

• 한국지반신소재학회논문집
• /
• 제8권3호
• /
• pp.1-7
• /
• 2009

지오그리드 보강재는 여러 토구조물에 널리 적용되어진다. 일반적으로 보강토 기초의 극한지지력은 강소성이론 이나 한계평형이론에 의하여 설명된다. 강소성이론 이나 한계평형이론에서는 보강재 또는 기초지반에 발생되는 파괴변형이나 변형율에 대하여 정확한 해석을 얻을 수 없다. 본 논문에서는 연약층위의 보강토 기초지반에 대하여 수치해석방법을 이용하여 자세한 파괴변형거동에 대하여 조사하였다. 보강재의 개수, 길이, 깊이 등을 포함하여 연약층위의 보강토 기초에 대하여 일련의 수치해석을 수행하였다. 유한요소프로그램을 사용하여 보강토기초에 대한 파괴거동 및 지지력의 향상효과에 대한 유효성이 조사되었다.

• 한국해양공학회지
• /
• 제29권3호
• /
• pp.217-223
• /
• 2015

In order to predict the motions of a planing hull in waves, it is necessary to accurately estimate the force components acting on the hull such as the hydrodynamic force, buoyancy, and friction, as well as the wave exciting force. In particular, based on strip theory, hydrodynamic forces can be estimated by the summation of the forces acting on each cross-section of the hull. A non-linear strip method for planing hulls was mathematically developed by Zarnick, and his formula has been used to predict the vertical motions of prismatic planing hulls in regular waves. In this study, several improvements were added to Zarnick's formula to predict the vertical motions of warped planing hulls. Based on calm water model test results, the buoyancy force and moment correction coefficients were modified. Further improvements were made in the pile-up correction. Pile-up correction factors were changed according to variations of the deadrise angles using the results found in previous research. Using the same hull form, captive model tests were carried out in other recent research, and the results were compared with the present calculation results. The comparison showed reasonably good agreements between the model tests and present calculations.

• 한국지반신소재학회논문집
• /
• 제9권2호
• /
• pp.33-40
• /
• 2010

본 연구에서는 강재스트립 보강재에 지지부재가 결속된 형태의 보강재에 대하여 인발시험을 수행하였으며, 인발시험결과와 기존에 제안된 지지저항 평가식에 의한 결과를 비교함으로서 인발변위 50mm일 때의 인발력과 최대 인발력에 의한 지지부재의 지지저항 특성을 평가하였다. 인발변위 50mm일 때의 인발력 적용에 의한 지지저항응력(${\sigma}^{\prime}_b$)은 수직응력 증가에 따라 전면전단파괴에서 펀칭전단파괴로 근접하였으며, 지지부재 개수의 증가에 따라서는 펀칭전단파괴에서 전면전단파괴로 근접하는 것으로 확인되었다. 최대 인발력을 적용한 지지저항응력(${\sigma}^{\prime}_b$) 은 수직응력 조건 및 지지부재 개수와 관계없이 전면전단파괴에 근접하였지만, 보강토옹벽의 허용변위를 고려한다면 설계 적용에는 무리가 있을 것으로 분석되었다. 그리고 Prandtl의 소성이론 및 원주공동확장이론에 의한 이론식을 이용한 지지저항 평가는 인발시험결과가 Prandtl의 소성이론을 이용한 예측결과에 보다 가까운 것으로 확인되었다. 또한 Prandtl의 소성이론 및 원주공동확장이론을 이용한 지지저항 평가모델은 전면전단파괴와 펀칭전단파괴모델 사이에 위치하는 것을 확인하였다.

• 해양환경안전학회지
• /
• 제1권1호
• /
• pp.27-38
• /
• 1995

In this paper, a program for the calculation of GZ curve for a ship in waves is developed and GZ curves for a ferry in the still water and in waves are calculated. And the added mass, damping, restoring forces and wave exciting forces are calculated by using the strip theory given by Salvesen, Tuck, Faltinsen. Capsizing simulations are perfoned in consideration if the nonlinear restoring forces of the ship in waves by using the Runge-Kutta 4-th method.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.86.1-86
• /
• 2001

Combined with a counter, wheel or strip encoders which have equally divided markers are one of frequent measuring choices towards various applications in terms of cost, simplicity, and diversity of measurements, e.g., measuring displacement, velocity, acceleration, and so on. Often, velocity is measured by counting the series of reference clocks for a period of time which sensor-carrying device took for traveling two adjacent encoding markers. Quantizaion error of such that the disturbance caused by quantization error is under control. This paper identifies design issues, developes theory, and proposes a paradigm to design a velocity measurement system such ...

• Selected Papers of The Society of Naval Architects of Korea
• /
• 제2권1호
• /
• pp.79-105
• /
• 1994

A ship in waves is suffered from the various wave loads that comes from its motion throughout its life. Because these loads are dynamic, the analysis of a ship structure must be considered as the dynamic problem precisely. In the rationally-based design, the dynamic structural analysis is carried out using dynamic wave loads provided from the results of the ship motion calculation as a rigid body. This method is based on the linear theory assumed low wave height and small amplitude of motion. But at the rough sea condition, high wave height, compared with ship's depth, induce the large ship motion, so the ship section configuration under waterline is rapidly changed at each time. This results in a non-linear problem. Considering above situation in this paper, a strength analysis method is introduced for the hull girder among waves considering non-linear hydrodynamic forces. This paper evaluates the overall or primary level of the ship structural dynamic loading and dynamic response provided from the non-linear wave forces, and bottom flare impact forces by momentum slamming theory. For numerical calculation a ship is idealized as a hollow thin-walled box beam using thin walled beam theory and the finite element method is used. This method applied to a 40,000 ton double hull tanker and attention is paid to the influence of the response of the ship's speed, wave length and wave height compared with the linear strip theory.