Journal of the Korean Geosynthetics Society (한국지반신소재학회논문집)

Korean Geosynthetics Society (한국지반신소재학회)
권호 표지

The Analysis of Bearing Capacity Behavior of Strip Footing on Geogrid-Reinforced Sand over a Soft Clay by Numerical Method

수치해석방법에 의한 연약지반위의 보강띠기초의 지지력거동해석

  • 김영민 (전주대학교 공과대학 토목환경공학과) ;
  • 강성귀 (전주대학교 공과대학 토목환경공학과)
  • Received : 2009.08.25
  • Accepted : 2009.09.02
  • Published : 2009.09.30
Download PDF
⟨ Previous Next ⟩

Abstract

Earth reinforcement by using geogrids as reinforcing materials are widely applied to several earth structures. The bearing capacity of geogrid reinforced foundation soils is usually examined on based on the rigid plasticity theory or Limit Equilibrium Method. Method of analysis such Limit Equilibrium Method provide no detail information about failure behaviour or strain which develop in the reinforcement or foundation. In this paper the analysis of failure behaviour of strip footing on geogrid-reinforced sand over a soft caly was investigated by using a numerical method. A series of finite element analyses were performed on a geogrid-reinforced strip footing over a soft clay including number of geogrid layers, length, depth. We effectively investigated the failure behaviour and improvement of bearing capacity on the reinforced foundation soil by using FEM program.

지오그리드 보강재는 여러 토구조물에 널리 적용되어진다. 일반적으로 보강토 기초의 극한지지력은 강소성이론 이나 한계평형이론에 의하여 설명된다. 강소성이론 이나 한계평형이론에서는 보강재 또는 기초지반에 발생되는 파괴변형이나 변형율에 대하여 정확한 해석을 얻을 수 없다. 본 논문에서는 연약층위의 보강토 기초지반에 대하여 수치해석방법을 이용하여 자세한 파괴변형거동에 대하여 조사하였다. 보강재의 개수, 길이, 깊이 등을 포함하여 연약층위의 보강토 기초에 대하여 일련의 수치해석을 수행하였다. 유한요소프로그램을 사용하여 보강토기초에 대한 파괴거동 및 지지력의 향상효과에 대한 유효성이 조사되었다.

Keywords

References

  1. 山内豊総, 後藤惠之輔(1979), "敷網工の実用支持公式の一提案", 九大工學集報, Vol.52, No.3, pp.201-207.
  2. Barenberg, E.J. (1980), Design procedures for soil-fabric aggregate systems with Mirafi 500X fabric, University of Illinois at Urbana Champaign.
  3. Braja, M.D. (1995), Principles of Fundation Engineering, 3rd Edition, PWS.
  4. Bender, D.A. and Barenberg, E.J. (1978), Design and behavior of soil fabric aggregate systems, Transportation Research Record 671, pp.64-75.
  5. Binquet, J. and Lee, K.L. (1975), "Bearing capacity analysis of reinforced earth slabs", Journal of Getechnical Engineering, Vol.101, No.12, pp.1257-1276.
  6. Bringkgreve, R. and Vermeer, P. (2002), PLAXIS Finite Element Code for Soil and Rock Analysis Version 8, Plaxis B.V., The Netherlands.
  7. Giroud, J.P. and Noirray, L. (1981), "Geotextile-reinforced unpaved road design", Journal of Getechnical Engineering, Vol.107, No.9, pp.1233-1254.
  8. Griffith, D.V. and Lane, P.A. (1999), "Slope stability analysis by finite elements", Geotechnique, Vol.49, No.3, pp.387-403. https://doi.org/10.1680/geot.1999.49.3.387
  9. T.A. and Barron,J.V. (1983), Optimum depth method for design of fabric reinforced unsurfaced roads, Transportation Research Record 916, pp.26-32.
  10. Huang, C.C., and Tatsuoka, F. (1988), "Prediction of bearing capacity in level sand groud reinforced with strip reinfocement", Proc., INt. Geotech. Symp. Theory and Pract. of Earth Reinforcement, Balkema, Fukuoka, Kyushu, Japan, pp.191-196.
  11. Meyerhof, G.G. (1974), "Ultimate bearing capacity of footing on sand layer overlying clay", Canadian Geotechnical Journal, Vol.11, No.2, pp.223-229. https://doi.org/10.1139/t74-018
  12. Mostafa A. E. (2007) "Behavior of strip footing on geogrid-reinforced sand over a soft clay slope", Geotexiles and Geomembranes, Vol.25, pp.50-60. https://doi.org/10.1016/j.geotexmem.2006.06.001
  13. San, K.C, Leshchinsky, D. and Matsui, T (1994), "Geosynthetic reinfoced slope: Limit equilibrium and finite element analyses", Soils and Foundations, Vol.34, No.2, pp.79-85. https://doi.org/10.3208/sandf1972.34.2_79
  14. Schlosser, F., Jacobsen, H. M., and Juran, I. (1983), "Soil reinforcement", General Rep., 8th Eur. Conf. on Soil Mech. and Found. Engrg., Balkema, Helsinki, pp.83-103.
  15. Shin, E.C., Das, B.M., Puri, V.K., Yen, S.C., and Cook, E.E. (1993), "Bearing capacity of strip foundation on geogrid reinforced clay", Getechnical Testing Journal, ASTM, Vol. 17, No.4, pp.534-541.