• Journal of the Korean Arthroscopy Society
• /
• v.6 no.2
• /
• pp.136-141
• /
• 2002

Purpose : The role of biceps pulley is stabilizing sling for the long head of the biceps tendon against anterior shearing stress in the rotator interval. The purpose of this study was to classify arthroscopic findings of biceps pulley and to evaluate the relationship with shoulder pathology. Materials and Methods : From January 2002 through July 2002, we observed biceps pulley in 49 cases of shoulder pathology treated with arthroscopically. There were 22 cases of anterior instability, 12 cases of rotator cuff tear, 5 of impingement syndrome, 6 of frozen shoulder, 2 of superior labral injury and 1 of each scapulothoracic bursitis and biceps dislocation. We classified biceps pulley as four types according to the arthroscopic appearance. Type I its stretched type. type II as sling type, type III at detached sling type, and type IV as concealed type. Results : We observed stretched type in 24 cases $(49\%)$, sling type in 5 cases $(10\%)$, detached sling type in 2 cases, concealed type in 1 case, and unidentified cases in 17 cases $(35\%)$. Conclusion : Development and variation of biceps pulley may have symptomatic correlation according to the degree of shoulder motion or pathologic status.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2001.05a
• /
• pp.122-128
• /
• 2001

The simulation analyses of a dish solar power system with stirling engine in this study are applied to system performance prediction if four different test sites; Seoul, Pusan and Cheju in Korea, and Naha in Japan. The effects of difference of concentrator type such as monolithic and stretched-membrane construction on system efficiency are also evaluated. The total amount of generated power for a year depends on the site. However the total maximum system efficiency in every site is approximately 16% and there isnt striking difference. It is also found that the maximum collector efficiency of stretched-membrane concentrator is about 3∼15% lower than that of the monolithic type.

• Polymer(Korea)
• /
• v.27 no.4
• /
• pp.313-322
• /
• 2003

The morphology of poly(ethylene terephthalate) (PET)/poly(m-xylene adipamide) (MXD-6) blends, which was prepared by adding compatibilizer and interchange reaction agent, was investigated. The morphological change in the stretched blend films was also studied. The stretched film showed a dispersed MXD-6 fibril. This fibril became finer with increasing draw ratio (DR). The addition of compatibilizer and interchange reaction agent had no effect on the improvement of interfacial adhesion but caused a defect between the continuous phase and the dispersed phase, leading to the formation of irregular fibril. The change in the superstructure of blends with composition and draw ratio was examined with light scattering (LS). The H$\sub$v/ LS patterns showed a double-cross type pattern consisting of a broad rod-like pattern and a sharp cross streak. On the basis of the model calculation of the H$\sub$v/ pattern, it was found that the appearance of the double-cross type pattern was attributed to the stacking of crystals oriented along the draw direction. The crystals were gradually oriented to the stretching direction with draw ratio. As a result, the high level of orientation was obtained fur the sample of draw ratio is 6.0.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.5 no.4
• /
• pp.86-92
• /
• 2006

In the automobile and machine industry, Forming type conveyer system have problems in that hinge belt plate are stretched, produce a noise and get abrasion. they make the machine get out of order. we make hinge belt thicker for reducing the trouble. Thick hinge belt was stronger. But it was heavier. And it was hard to come up with buyer's expectations because the mold which makes the hinge belt have limit of strength, life cycle and size. So, we developed the machine welded each part of hinge belt plate.

• Journal of computational fluids engineering
• /
• v.11 no.1 s.32
• /
• pp.1-7
• /
• 2006

Numerical investigation of a centrifugal compressor volute having a modified straight conical duct hill been made. Three-dimensional Reynolds-Averaged Navier-Stokes equations with $k-{\varepsilon}$ turbulence equation are solved To avoid coordinate singularity at the central axis of the duct, multi-block H-type grid is generated on the circular cross-sections of the volute and stretched toward the solid wall boundary. We obtained numerical results with three different mass flow rates at the volute inlet, namely, with the inlet conditions that give small, medium and large mass flow rates at the outlet of the conical duct. Agreement with the experimental results is observed.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.416-420
• /
• 2002

This Paper describes a matched-filter type strain sensor system using optical fiber Bragg grating (FBG) sensor. Matched-filter type uses another wavelength-matched FBG filter to track wavelength shift in the FBG sensor. Filter FBG is attached on a fiber stretcher and stretched by PZT actuator. To overcome the nonlinearity and hysteresis of the PZT actuator that degrades system accuracy, a string resonator which can measure an absolute strain is employed. And the effect of vibration modes on string resonator is investigated particularly regarding its sensitivity and stability.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.10
• /
• pp.1146-1152
• /
• 2011

Ink transfer process is very important to determine quality of printed pattern, therefore its mechanism should be understood to control printing quality. Although there have been many attempts to understand ink transfer mechanism by numerical simulation and experimental studies, their model was too much simple to model realistic printing process and our understanding is not enough yet. In this paper we designed ink transfer visualization system to present flow visualization of ink transfer process for gravure offset printing. We considered rotational effect of blanket roll which is related with printing speed and used non-Newtonian fluid as working fluid such as Ag paste. For printing unit, cantilever-type blanket roll is used for convenient visualization of ink transfer. Serial images were captured continuously by using high-speed CMOS camera and long range microscope. We investigated the effects of various design parameters such as printing speed and pattern angle on the ink transfer process. We found more stretched ink filament for non-Newtonian fluid than Newtonian fluid. As increasing printing speed, length of stretched ink filament and height of break-up point are also increased. We also compared ink transfer process between CD and MD pattern and its relationship with ink transfer mechanism.

• Journal of the Korean Institute of Rural Architecture
• /
• v.12 no.2
• /
• pp.135-142
• /
• 2010

This research aims to examine the characteristics of tomb sites including tomb mound and attached buildings and also to find out the principles reflected in the traditional oriental Feng-Shui location and spatial composition of Junkyung and Youngkyung tomb at Samcheok. The results of this study are as follows. These tombs harmonize with each other in the cosmic dual forces because Junkyung tomb is men's sex symbol and tiger to lie on his belly and Youngkyung tomb is women's sex symbol in geographical feature. Spatial structure in these tomb sites were placed in a reflected line following the hierarchy of metaphysics by standing high Geumchunkyo(Bridge)-Hongsalmun(Gate)-Jegak(Pavilion)-Bongbun(Tomb mound). Axis structure of these tombs is irregular bent-axis type from Geumchunkyo to Bongbun, specially in case of Youngkyung tomb it is getting more refractive. These tombs are divided into and characterized by three zones. Firstly the space for living people constitutes from Geumchunkyo to Hongsalmun, secondly the semi-sacred space constitutes from Hongsalmun to Jegak, and lastly the space for the dead constitutes from the back of Jegak to Bongbun. - type Jegak instead of T type Jegak generally used at Chosun Dynasty was installed because of claypan stretched out in front of Junkyung tomb and Bongbun of Youngkyung tomb located at a ravine between two mountain ranges.

• Korean Journal of Remote Sensing
• /
• v.9 no.1
• /
• pp.1-19
• /
• 1993

A simple bispectral threshold technique which reflects the temporal and spatial characteristics of the analysis area has been developed to classify the cloud type and estimate the cloud cover from GMS/S-VISSR(Stretched Visible and Infrared Spin Scan Radiometer) imagery. In this research, we divided the analysis area into land and sea to consider their different optical properties and used the same time observation data to exclude the solar zenith angle effects included in the raw data. Statistical clear sky radiance(CSRs) was constructed using maximum brightness temperature and minimum albedo from the S-VISSR imagery data during consecutive two weeks. The CSR used in the cloud anaysis was updated on the daily basis by using CSRs, the standard deviation of CSRs and present raw data to reflect the daily variation of temperature. Thresholds were applied to classify the cloud type and estimate the cloud cover from GMS/S-VISST imagery. We used a different thresholds according to the earth surface type and the thresholds were enough to resolve the spatial variation of brightness temperature and the noise in raw data. To classify the ambiguous pixels, we used the time series of 2-D histogram and local standard deviation, and the results showed a little improvements. Visual comparisons among the present research results, KMA's manual analysis and observed sea level charts showed a good agreement in quality.

• Journal of Advanced Marine Engineering and Technology
• /
• v.14 no.1
• /
• pp.62-71
• /
• 1990

Two-dimensional turbulent wake flow past a rectangular cylinder is investigated experimentally by using the linearized constant temperature hot-wire anemometer. Some of turbulent characteristics are obtained at the range of X=6B-500B downstream from the cylinder and the Reynolds number range is 500-2800. For the statistical treatment, autocorrelation coefficient, probability density function and power spectral density function are obtained by using the signal analyzer. It is clear that coherent structure of strong periodic eddies exists to the position of 20B downstream from the cylinder, and its feature is similar to round type as nearer to the cylinder while it is stretched longitudinally along with flow direction as the distance from the cylinder is increased to downstream.