• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.4
• /
• pp.721-726
• /
• 2017

We fabricated stretchable thin-film transistors(TFTs) on a polydimethylsiloxane substrate with patterned polyimide island structures by using an amorphous InGaZnO semiconductor and parylene gate insulator. The TFTs exhibited a field- effect mobility of $5cm^2V^{-1}s^{-1}$ and a current on/off ratio of $10^5$ at a relatively low operating voltage. Furthermore, the fabricated transistors showed no noticeable changes in their electrical performance for large strains of up to 50 %.

• Journal of Industrial Convergence
• /
• v.20 no.12
• /
• pp.79-85
• /
• 2022

Recently, a smartphone manufactured on a flexible substrate has been released as an electronic device, and research on a stretchable electronic device is in progress. In this paper, a silicon-based stretchable material is made and used as a substrate to implement and evaluate an optical sensor device using oxide semiconductor. To this end, a substrate that stretches well at room temperature was made using a silicone-based solution rubber, and the elongation of 350% of the material was confirmed, and optical properties such as reflectivity, transmittance, and absorbance were measured. Next, since the surface of these materials is hydrophobic, oxygen-based plasma surface treatment was performed to clean the surface and change the surface to hydrophilicity. After depositing an AZO-based oxide film with vacuum equipment, an Ag electrode was formed using a cotton swab or a metal mast to complete the photosensor. The optoelectronic device analyzed the change in current according to the voltage when light was irradiated and when it was not, and the photocurrent caused by light was observed. In addition, the effect of the optical sensor according to the folding was additionally tested using a bending machine. In the future, we plan to intensively study folding (bending) and stretching optical devices by forming stretchable semiconductor materials and electrodes on stretchable substrates.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.29-29
• /
• 2010

기존의 반도체 공정을 기반으로 하는 소자구조는 주로 평면의 웨이퍼상에 만들어져왔다. 그러나, 제작된 소자 어레이를 늘림이 가능한 (stretchable) 폴리머 기판에 프린팅 전이하는 방식을 이용하면 어떤 형태의 곡면에도 소자 제작이 가능해진다. 이러한 프린팅 방식으로, 다양한 곡면에 실리콘 소자 어레이를 제작한 연구결과를 발표하고자 한다. 한 응용 예로 사람의 눈과 같은 반구형 표면에 실리콘 나노 리본으로 만든 광다이오드 어레이를 배열하여 전자 눈 카메라를 제작하여 성능을 확인하였다. 또한 수차를 최소화할 수 있는 포물면에 전자눈 카메라를 제작하여 평면카메라에 비해 이미지의 균일성이 우수함을 보여주고자 한다.

• Korean Journal of Materials Research
• /
• v.21 no.3
• /
• pp.133-137
• /
• 2011

Gold have been used as an electrode materials having a good mechanical flexibility as well as electrical conductivity, however the stretchability of the gold on a flexible substrate is poor because of its small elastic modulus. To overcome this mechanical inferiority, the reinforcing gold is necessary for the stretchable electronics. Among the reinforcing materials having a large elastic modulus, carbon nanotube (CNT) is the best candidate due to its good electrical conductivity and nanoscale diameter. Therefore, similarly to ferroconcrete technology, here we demonstrated gold electrodes mechanically reinforced by inserting fabrics of CNTs into their bodies. Flexibility and stretchability of the electrodes were determined for various densities of CNT fabrics. The roles of CNTs in resisting electrical disconnection of gold electrodes from the mechanical stress were confirmed using field emission scanning electron microscope and optical microscope. The best mechanical stability was achieved at a density of CNT fabrics manufactured by 1.5 ml spraying. The concept of the mechanical reinforced metal electrode by CNT is the first trial for the high stretchable conductive materials, and can be applied as electrodes materials in various flexible and stretchable electronic devices such as transistor, diode, sensor and solar cell and so on.

• The Research Journal of the Costume Culture
• /
• v.15 no.6
• /
• pp.1038-1052
• /
• 2007

The purpose of this study is to analyze present the pattern making of the lining fabrics calculating the right ease and rising quantities of arm-hole when the pattern of the lining fabrics of stretchable jacket fabrics is produced. The outcomes of this study are as follows. The right ease of lining fabrics was not room of 0cm as patterns being same the right side of fabrics in the girth of the chest, waist, and the edge of a garment and gets the most excellent valuation, and then the girth of the chest, and waist was applied to 2cm and around the edge of a garment 0cm in regular lining fabrics. In addition to, although the ease of patterns of the lining fabrics was more, it was not necessarily to satisfy. The result of the valuation according to the quantities of rising arm-hole of the pattern of the lining fabrics showed that the making lining fabrics that the quantities of rising arm-hole was 0.8cm in the body and 1.2cm in the sleeve in the both the stretchable fabrics and regular lining fabrics was the most excellent thing, and then 0cm in the body and 2cm in the sleeve, and then 0cm in the body and 0cm in the sleeve. The valuation of external appearance on the quantities of rising arm-hole was recognized similarly because of being rarely significance level, but around the chest and waist was recognized as being significance level in wearing satisfaction.

• Korean Journal of Metals and Materials
• /
• v.56 no.11
• /
• pp.835-843
• /
• 2018

In this work, we report a delta rosette strain sensor based on highly stretchable silver nanowire (AgNW) percolation piezoresistors. The proposed rosette strain sensors were easily prepared by a facile two-step fabrication route. First, three identical AgNW piezoresistive electrodes were patterned in a simple and precise manner on a donor film using a solution-processed drop-coating of the AgNWs in conjunction with a tape-type shadow mask. The patterned AgNW electrodes were then entirely transferred to an elastomeric substrate while embedding them in the polymer matrix. The fabricated stretchable AgNW piezoresistors could be operated at up to 20% strain without electrical or mechanical failure, showing a maximum gauge factor as high as 5.3, low hysteresis, and high linearity ($r^2{\approx}0.996$). Moreover, the sensor responses were also found to be highly stable and reversible even under repeated strain loading/unloading for up to 1000 cycles at a maximum tensile strain of 20%, mainly due to the mechanical stability of the AgNW/elastomer composites. In addition, both the magnitude and direction of the principal strain could be precisely characterized by configuring three identical AgNW piezoresistors in a delta rosette form, representing the potential for employing the devices as a multidimensional strain sensor in various practical applications.

• Nano
• /
• v.13 no.12
• /
• pp.1850146.1-1850146.9
• /
• 2018

The rapid development of smart textiles requires the large-scale fabrication of conductive fibers. In this study, we develop a simple, scalable and low-cost capillary-driven self-assembly method to prepare conductive fibers with uniform morphology, high conductivity and good mechanical strength. Fiber-shaped flexible and stretchable conductors are obtained by coating highly conductive and flexible silver nanowires (Ag NWs) on the surfaces of yarn and PDMS fibers through evaporation-induced flow and capillary-driven self-assembly, which is proven by the in situ optical microscopic observation. The density of Ag NWs and linear resistance of the conductive fibers could be regulated by tuning the assembly cycles. A linear resistance of $1.4{\Omega}/cm$ could be achieved for the Ag NWs-coated nylon, which increases only 8% after 200 bending cycle, demonstrating high flexibility and mechanical stability. The flexible and stretchable conductive fibers have great potential for the application in wearable devices.

• Composites Research
• /
• v.35 no.4
• /
• pp.283-287
• /
• 2022

Stretchable strain sensors have been developed for potential future applications including wearable devices and health monitoring. For practical implementation of stretchable strain sensors, their stability and repeatability are one of the important aspects to be considered. In this work, we utilized 3D printed polymer structures having kirigami patterns to improve the stretchability and reduce the hysteresis. The polymer structures were coated with graphene/carbon nanofiber hybrids to make a robust electrical network. The stretchable strain sensors showed a high gauge of 36 at a strain of 32%. Because of the kirigami structures and the robust graphene/carbon nanofiber coating, the sensors also exhibited stable resistance responses at various strains ranging from 1% to 30%.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.4
• /
• pp.10-16
• /
• 2021

This paper proposes a model that considers the parity-time symmetric structure as a state detection circuit for sensor applications using a stretchable inductor. In particular, to obtain a more practical computer simulation result, the stretchable inductor model was applied to this study model by referring to previously reported experimental results. The resistance component and phase component were controlled through the negative differential resistance circuit used in this study. In addition, the imbalance of the circuit caused by a change in the characteristics of the stretchable inductor could be compensated for using a negative differential resistance circuit. In particular, an analysis of the frequency characteristics of the sensor driving circuit of the parity-time symmetric structure proposed in this study confirmed that the Q-factor could be increased up to 20 times compared to the conventional resonant circuit.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.224-224
• /
• 2015

Gel have enormous applicable region due to inherently high stretchability and bio-compatibility. Here, we fabricated highly stretchable electronic conductive organogels which have long-term stability in environment. By introducing a dialysis step which can incorporate conducting polymer, PEDOT, on the procedure of gel synthesis, residual ions inside the gel were removed. In addition, we replaced the water with organic solvent, EG, inside the gels which is high stability in air. Unlike conventional hydrogels, there are no ionic conduction occurred and electrochemically driven current was prevented during electrical voltage was applied. The fabricated organogels are hardly dried during air exposure, and only electrically conductive without any electrochemical reaction at even high voltage. In order to utilize as stretchable conductor, we demonstrated a LED array circuit using the conductive organogels as electrical interconnects. It was successfully operative even stretched up to 300% strain.