• Journal of Welding and Joining
• /
• v.6 no.4
• /
• pp.27-34
• /
• 1988

The objective of this paper is to investigate the effect of residual stress on fatigue crack growth behavior. For this purpose, submerged arc welding was performed on SM50A steel plate and post weld heta treatment (PWHT) was followed. Residual stress distribution on the weld plate was determined by a hole drilling method and a series of .DELTA.P-const. and .DELTA.K-decreasing fatigue test were performed on the three different regions, i.e. weld metal, HAZ and base metla. Following conclusins were achieved. 1. In "as welded" specimens, tensile residual stresses were produced in the center portion of the specimen while compressive residual stresses were produced near the edges. In PWHT specimens, however, most of the residual stresses were disappeared. 2. The fatigue crack growth behavior in low .DELTA.K region was considerably affected by the presence of residual stress in both "as welded" and PWHT specimens. 3. Because of the relaxation of residual stresses in PWHT condition, the values of m increased from 2.62-2.78 (in the "as welded" condition) to 3.57-3.91 (in the "PWHT" condition)3.91 (in the "PWHT" condition)condition)

• The Journal of the Society of Korean Medicine Diagnostics
• /
• v.19 no.1
• /
• pp.35-45
• /
• 2015

Objective The aim of this study was to investigate stress-related factors. Method: The subjects were 22,937 persons who had received health examination by Korean Medicine and submitted questionnaires for 8 months from March to November in 2011. The stress was measured by heart rate variability in an automobile manufacturing industry. We analyzed the relationship between stress and other factors including ages, smoke amount, drinking frequency, exercise frequency, occupational category, conjugal condition by multivariate analysis with SPSS ver. 19.0. Results: Comparing "normal" to "very bad" and "bad" level of stress, ages, drinking frequency, conjugal condition are not significant difference(p>0.05). But smoking amount and occupational category are significant difference(p<0.05). Whereas comparing "normal" to "very good" and "good" level of stress, ages, occupational category, conjugal condition, smoking amount, drinking frequency are not significant difference(p>0.05). Exercise is significant difference(p<0.05). Conclusion: The results of this study suggest that smoke is affected to stress negatively, whereas exercise is affected to stress positively.

• Korean Journal of Health Education and Promotion
• /
• v.19 no.2
• /
• pp.139-154
• /
• 2002

This study was conducted to examine to causes and symptoms of stress and factors influencing stress management of workers in beauty shops. 811 people who were working in the shops located in Daegu City and Kyungbuk Province were selected as subjects of this study. Data were collected from April 10, 2000 to July 10, 2000. The results of this study can be summarized as follows. According to general characteristics of the respondents, female was 90.8%. 42.1 % of them was in their twenties and 73.7% of them did not marry. 57.5% of the respondents grew up in big cities and 41.1% had no religion. 63.6% was graduated from junior colleges. 44.6% of them worked for below I year and 33.9% earned below four hundred and ninety thousand won per month. 55.8% of them was satisfied with their work aptitude, while 34.2% was not satisfied with it. In the case of satisfaction level with working environment, ‘common level’ was 46.3%, while 12.8% of them was unsatisfied with it. In the case of stress level by factors of stress related to working, male was higher (9.34 $\pm$ 2.38 points). Those who grew up in towns or villages and those who belonged to the middle class showed high stress level. Those who married and those who graduated from high school also displayed high stress level. It also appeared that monthly income influenced the stress level related to working.. The extent of stress level influencing physical causes appeared in order of health condition, education level, sex, satisfaction level with work aptitude, economic status, and working hours. The extent of stress level influencing whole organizational level appeared in order of satisfaction level with work aptitude, working hours, education level, health condition, and sex. The extent of stress factors influencing depressed feeling of stress symptom appeared in order of working hours, sex, amount of smoking, absence due to stress, age, health condition, and education level. The extent of influencing factors on active stress management appeared in order of satisfaction level with work aptitude, health condition, size of the shop, drinking, sex, and the number of day off. The extent of influencing factors on avoidable stress management appeared in order of age, absence due to stress, drinking, health condition, and sex.

• International Journal of Highway Engineering
• /
• v.19 no.4
• /
• pp.19-25
• /
• 2017

PURPOSES : In this paper, the flow of construction material was simulated using computational fluid dynamics in a 2D axisymmetric condition to evaluate the effect of initial or varying material properties on the final shape of a specimen. METHODS : The CFD model was verified by using a well-known analytical solution for a given test condition followed by performing a sensitivity analysis to evaluate the effect of material properties on the final shape of material. Varying dynamic viscosity and yield stress were also considered. RESULTS : The CFD model in a 2D axisymmetric condition agreed with the analytical solution for most yield stress conditions. Minor disagreements observed at high yield stress conditions indicate improper application of the pure shear assumption for the given material behavior. It was also observed that the variation of yield stress and dynamic viscosity during curing had a meaningful effect on the final shape of the specimen. CONCLUSIONS : It is concluded that CFD modeling in a 2D axisymmetric condition is good enough to evaluate fluidal characteristics of material. The model is able to consider varying yield stress and viscosity during curing. The 3D CFD-DEM coupled model may be required to consider the interaction of aggregates in fluid.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.2
• /
• pp.137-143
• /
• 2000

An automobile clutch diaphragm spring is operating in a closed clutch housing under high temperature and subject to high stress concentration in driving condition, which frequently causes cracks and fracture. The material of spring is required to possess sufficient fatigue strength and tenacity, which depend largely on the condition of tempering heat treatment. In this paper, specimens are made under a number of different tempering temperatures md tested to find the optimal tempering heat treatment condition. The experiments include the verification of microscopic structure, hardness, tensile strength, fatigue crack growth rate, stress intensity factor range and residual stress. Also, decarbonization, which occurs in actual heat treatment process, is measured and allowable decarbonization depth is studied by durability test.

• Journal of Welding and Joining
• /
• v.31 no.5
• /
• pp.1-6
• /
• 2013

In carrying out the elastic-plastic analysis, four conditions (equilibrium equation, constitutive equation, condition of compatibility and yield condition) should be satisfied. In welding, the temperature largely changed from a melting temperature to a room temperature. So, yield stress of materials largely changed, too. In particular, yield stress becomes about zero over $700^{\circ}C$. The analysis should be carried out under the condition that equivalent stress generated in temperature increment ${\Delta}T$ did not exceed yield stress of materials at high temperature over $700^{\circ}C$. It should be sufficiently recognized that the obtained results were not reliable if this condition was not satisfied.

• Journal of the Korean Wood Science and Technology
• /
• v.37 no.2
• /
• pp.128-136
• /
• 2009

Curved glued laminated timber (glulam) is rapidly coming into the domestic modern timber frame buildings and predominant in building construction. The radial stress is frequently occurred in curved beams and is a critical design parameter in curved glulam. Three models, Wilson equation, Exact solution and Approximation equation were introduced to determine the radial stress of curved glulam under pure bending condition. It is obvious that radial stress distribution between small radius and large radius was different due to slight change of neutral plane location to center line. If the beam design with extremely small radius, it should be considered to determine the exact location of maximum radial stress. The current standard KSF 3021 was reviewed and would be considered some adjustment determining the optimum radius in curved glulam. Current design principle is that the stress factor is given by the curvature term only in constant depth of the beam, but like tapered or small radius of beams, the stress factor by Wilson equation was underestimated. So current design formula should be considered to improvement for characterizing the radial stress factor under pure bending condition.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.6
• /
• pp.1109-1115
• /
• 2008

In the ubiquitous health monitoring environments, it is quite important not only to evaluate the physiological health condition but also mental stress condition. In order to achieve this goal, a heart activity monitoring system utilizing a wearable bipolar electrode is devised and the heart rate variability(HRV) is extracted and interpreted in both frequency and time feature domains. Consequently, to evaluate the emotional stress condition of the subjects, a stress-induced experimental protocol was applied to healthy subjects and the time and frequency features of heart activity were analyzed in terms of the ratio of low frequency components v.s., high frequency components and the relevant the moving average distributions compromising the successive RR peaks intervals in the ambulatory ECG measurement system.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.12 no.2
• /
• pp.62-67
• /
• 2013

The influence of internal stress and joint strength(shear, tensile) according to the deposition conditions was investigated by the Polyimide substrate and ZnO thin film. Deposition thickness and temperature affect the internal stress and the internal stress was minimum at the 60nm and $200^{\circ}C$ of the deposition conditions. Tensile strength is large at the deposition condition that shear strength is large and the shear strength was about 50% of the tensile strength. The shear strength and tensile strength were large at deposition condition that internal stress was small. Crack occurred near the joint interface of Polyimide substrate and progressed along the interface until the final fracture.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.03a
• /
• pp.754-761
• /
• 2008

In general, stress measurement of existent shotcrete lining be used by pressure cells. but, measuring instrument is lost by high pressure at shotcrete lining construction and pressure cell's measurement value have to low believability by natural conditions like curing temperature. In this study, proposed techniques to measure without utilizing sensitive stress sensor in natural condition at point that want stress of shotcrete lining after shotcrete lining construction. Executed numerical analysis to forecast stress level that interact in tunnel shotcrete lining, measured strain of hole by load action through hole in shotcrete lining. 3D FEM(finite element method) is enforced through various parameters curing time of shotcrete lining, thickness, load condition. Different model cases applied by parametic study. As analysis result, it could grasp development possibility of method that propose this time because it could examine corelation with strain by near hole of shotcrete lining and stress about load condition.