• 마이크로전자및패키징학회지
• /
• 제10권4호
• /
• pp.61-64
• /
• 2003

단일이온교환된 유리의 응력 특성을 관찰하기 위하여 파괴분석을 하였다. 프로세스변화로 인하여 이온교환된 유리의 응력층이 유리표면에서 안쪽으로 이동하였다. 깃털모양자국(hackle marker)과 거울면(mirror region)의 크기가 이온교환프로세스의 온도, 시간에 따라 변화하였으며, 파괴강도에 비례하였다. 또한 Indenter를 사용하여 응력층을 파괴하는 경우 일반유리와 같은 파괴특성을 나타냈다.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2003년도 생물공학의 동향(XII)
• /
• pp.311-314
• /
• 2003

Under hyperosmotic stress, rCHO cells display decreased specific growth rate $({\mu})$ and increased specific antibody productivity $(q_{Ab})$. The effects of hyperosmotic stress on batch culture cellular dynamics are not well understood. To this end, we conducted a proteome profile of rCHO cells, using 2D-gel, MALDI-TOF-MS and MS/MS. As a result, the proteome profile of rCHO cells could be established using 41 identified proteins. Based on this proteome profile of rCHO cells, we have found at least 8 differently expressed spots at hyperosmotic osmolality (450 mOsm/kg). Among these spots, two metabolic enzymes were found to be up-regulated (pyruvate kinase and GAPDH), while down-regulated protein was identified as tubulin. It shows that hyperosmotic stress can alter metabolic state, by up-regulated activities of two glycolysis enzymes, which could lead to activate the generation of metabolic energy. Tubulin expression was down-regulated, suggesting a reduction of cell division. Finally, the increased conversion energy could leads to improve overall productivity.

• 한국정밀공학회지
• /
• 제31권2호
• /
• pp.125-131
• /
• 2014

Winding is an integral operation in almost every roll-to-roll continuous process and center-winding is suitable and general scheme in the winding system. However, the internal stresses within center-wound rolls can cause damage such as buckling, spoking, cinching, etc. It is therefore necessary to analyze the relationship between taper tension in winding section and internal stress distribution within center-wound roll to prevent the winding failure. In this study, an optimal taper tension control method with parabolic taper tension profile for producing high quality wound roll was developed. The new logic was designed from analyzing the winding mechanism by using the stress model in center-wound rolls. The performance of the proposed taper tension profile was verified experimentally.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2001년도 춘계학술대회 논문집
• /
• pp.168-172
• /
• 2001

The subsurface stress field beneath the roller due to the lubricant film pressure acting on the roller surface has been calculated. Main purpose of this study in view of engineering is to prove the validity of the numerical profile roller presented by Koo et al who obtained the lubricant film pressure by elastohydrodynamic lubrication analysis on the cam-roller mechanism. The stress field for the numerical profile roller was compared with the one for the existing dub-off profile roller.

• 대한기계학회논문집
• /
• 제10권6호
• /
• pp.870-875
• /
• 1986

본 연구에서는 랙의 이끝부분을 full-rounded tip으로 설계한 후, 이에 의하 여 창성되는 피니언의 이뿌리곡선을 구하여 전체치형을 완성하였다. 그리고 합성치 형기어의 미끄름율, 유효이뿌리원에서의 공칭굽힘응력과 두쌍접촉호의 길이대 원호부 분접촉호의 길이의 비인 접촉계수를 해석적인 방법으로 구하였다.또한 이들 특성들 과 물림율등 제특성을 비교.검토하여 공구압력각, 인벌류우트부분의 크기를 나타내는 물림각 및 원호반경등의 변화에 대한 제특성의 변화를 고려한 합성치형의 성능을 향상 시킬 수 있는 설계방법을 구하였으며, 합성치형과 표준인버류우트치형을 비교하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 춘계학술대회 논문집
• /
• pp.363-364
• /
• 2008

• 한국지능시스템학회논문지
• /
• 제17권7호
• /
• pp.952-956
• /
• 2007

산업현장에서는 공장 자동화의 발전에 따라 많은 로봇들이 사람을 대신하고 있다. 일반적으로 산업 현장에서 사용되는 로봇은 고정밀도의 감속기를 필요로 한다. 고정밀의 제어를 위해서는 cycloid 치형 혹은 인벌류트 치형을 가진 감속기를 사용하게 된다. 이러한 감속기는 낮은 백래쉬와 높은 감속비를 가지면서 동시에 치형의 높은 강성을 필요로 한다. 본 논문에서는 새로이 고안한 직선 치형을 가진 로봇 감속기(RSR) 치형의강성을 FEM 해석을 통해 실제로 적용이 가능한지 여부를 시뮬레이션 해보았으며, 실제로도 적용이 가능함을 알 수 있었다.

• KSTLE International Journal
• /
• 제5권1호
• /
• pp.14-22
• /
• 2004

The sub-surface stress field beneath the gear's contact surface caused by the surface pressure in lubricated condition is analyzed. To evaluate the influence of the clearances between a gear tooth and a pinion tooth on the stress field, two kinds of tooth profile models - conventional cylinder contact model and new numerical model - were chosen. Kinematics of the gear is taken into account to obtain the numerical model which is the accurate geometric clearances between a gear tooth and a pinion tooth. Transient elasto-hydrodynamic lubrication (EHL) analysis is performed to get the surface pressure. The sub-stress field is obtained by using Love's rectangular patch solution. The analysis results show that the sub-surface stress is quite dependent on both the surface pressures and the profile models. The maximum effective stress of the new model is lower than that of the old model. The depth where the maximum effective stress occurs in the new model is not proportional to the intensity of the external load.

• 동의신경정신과학회지
• /
• 제20권4호
• /
• pp.15-29
• /
• 2009

Objectives : This study was investigated to find out psychological characteristics of headache patients after traffic accident(TA). also It was identified headache after TA as predictor of posttraumatic stress disorder(PTSD). Methods : Minnesota Multiphasic Personality Inventory(MMPI) was administered to 26 TA patients, We divided them into four groups according to headache and sex and headache duration. Results : 3-1 profile was found by total mean of T score of each MMPI scale in all patients. 3-4 profile was found in headache group, 1-3 profile was found in female Group, female to have headache group. 3-1 profile was found in headache to continue more than 7 days. Conclusions : Female group, female to have a headache group, headache to continue more 7 days group showed 1-3/3-1 profile. it was similar to PTSD profile. The results indicate that in the above three groups, headache was predictor of PTSD and they must be treated more carefully.

• Geomechanics and Engineering
• /
• 제7권3호
• /
• pp.233-246
• /
• 2014

Estimation of fracture initiation pressure is one of the most difficult technical challenges in hydraulic fracturing treatment of vertical or horizontal oil wells. In this study, the influence of in-situ stresses and pore pressure values on fracture initiation pressure and its profile in vertical and horizontal oil wells in a normal stress regime have been investigated. Cohesive elements with traction-separation law (XFEM-based cohesive law) are used for simulating the fracturing process in a fluid-solid coupling finite element model. The maximum nominal stress criterion is selected for initiation of damage in the cohesive elements. The stress intensity factors are verified for both XFEM-based cohesive law and analytical solution to show the validation of the cohesive law in fracture modeling where the compared results are in a very good agreement with less than 1% error. The results showed that, generally by increasing the difference between the maximum and minimum horizontal stress, the fracture pressure and its profile has been strongly changed in the vertical wells. Also, it's been clearly observed that in a horizontal well drilled in the direction of minimum horizontal stress, the values of fracture pressure have been significantly affected by the difference between overburden pressure and maximum horizontal stress. Additionally, increasing pore pressure from under-pressure regime to over-pressure state has made a considerable fall on fracture pressure in both vertical and horizontal oil wells.