• Structural Engineering and Mechanics
• /
• 제69권1호
• /
• pp.69-75
• /
• 2019

The plates made of two materials joined to each other having the different coefficient of thermal expansions are frequently encountered in the industrial applications. The stress analysis of these members under the effect of high-temperature variation has great importance in design. In this study, the stress analysis of the experimental model developed for the problem considered here was performed by the method of photothermoelasticity. The thermal strains were formed by the mechanical way and these were fixed by the strain freezing method. For the stress measurements, the method of slicing is applied which provides three-dimensional stress analysis. The analytical solution in the literature was compared with the related stress distribution obtained from the model. Moreover, the axisymmetric finite element model developed for the problem was solved by ABAQUS and the results obtained here compared with those of the experimental model and the analytical solution. As a result of this study, this experimental method and numerical model can be used for these type of thermal stress problems which have not been comprehensively analyzed yet.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 1999년도 Proceedings of the 1999 Annual Conference The Korean Society of Agricutural Engineers
• /
• pp.294-300
• /
• 1999

After researching the physical properties of the concrete included Rice Husk Ash(RHA concrete) and workability of fresh concrete admixed RHA, we have tested durability of RHA-concrete against freeaing and thawing in the winter using rapid freezing and thawing test method(KS F 2456) . There aretwo hypotheses to explain the failure mechanism of a freezing and thawing action. First, the hydraulic pressure in the pores of freezing concrete make an internal stress of concrete structures outbreaking micro crack in the face of concrete, Second, Frost action causing damage to cement paste repeatedly come from soil frost action, freezing water in the capillaries. Initial Relative Dynamic Modulus of Elasticity (DME) was biggest in cae of unit binder weight 600kgf/㎥ and relative dynamic modulus of elasticity increased until 300cycles. In general , initial relative DME was proportional to unit binder weight . Relative DME was decreased in proportion to unit binder weight in the case of 300, 400, 500kgf/㎥ , but relative DME fo the others remained more than 90% until 300 cycles. It was not good effect of intermixed RHA to concrete in case of below unit binder weight 300kgf/㎥ and the resistance of freezing and thawing was not good either.

• 한국작물학회지
• /
• 제50권2호
• /
• pp.67-72
• /
• 2005

Overwintering capacity, closely related to winter hardiness, of Chinese milk vetch planted with different sowing times and sowing practices was investigated to improve the incorporation into cropping system in Korea. The tolerance to low temperature was evaluated with $LT_50$ using leaf disc leaching method. Dry weight of CMV was reduced remarkably with delayed planting from Sep. 5 to Oct. 20. The differences in tolerance to freezing temperature were not conspicuous among CMV genotypes, however, the differences between genotype (collections at different regions) were due to the plant architecture, mainly to the leaf angle. The crouching genotype collected at central region of Korean peninsula, which showed excellent freezing tolerant, has planophile leaves. The feature of internal constituents of CMV genotypes did not show any noticeable differences with respect to the freezing tolerance which evaluated by leaf disc leaching experiment. To overcome the poor overwintering capacity, tolerant genotype should be developed by selection with considering the plant architecture. The reduction of CMV growth during overwintering period was ameliorated with furrow-sowing under late-sown condition, therefore, when the CMV is inevitably sown late after recommended time, the seeds should be sown on furrow to overcome the cold stress.

• 한국작물학회지
• /
• 제34권s02호
• /
• pp.96-114
• /
• 1989

There are several meterorolgical stresses in the winter cereal crops. Among these stresses, cold injury is one of the most important stresses for wheat and barley production in Korea. The reduction in grain yield of the wheat and barley due to cold injury has occurred almost every year in Korea. The objective of the study was to get the basic information in relation to the cold injury and to detect the method minimizing the damage of cold injury. When the air temperature was the ranges of -13$^{\circ}C$ to -15$^{\circ}C$, the soil temperature at the crown part of the plant was very stable, whereas in the ranges of -2$^{\circ}C$ to -3$^{\circ}C$ the soil surface temperature was more unstable and cold than air and subterranean temperatures. The different parts of the plant in wheat and barley possess the different levels of cold hardiness. In comparison to the cold hardiness of plant parts, the leaf and crown are the less sensitive to cold injury than root and vascular transitional zone. The type and extent of stress is determined by the redistribution pattern of water during freezing. These types from freezing processes were three types: a) Equilibrium freezing pattern b) Non -equilibrium freezing pattern, c) Non-equilibrium freezing pattern typical of tender tissues. Cold hardiness in wheat plants were more harder than barley plants at vegitative stage, but inverted at the reproductive stage. Injuries by low temperature during the seasons of barley cultivation in Korea were occured mainly in four stage; in the first and third stage, frost injury occurs, the second stage, freezing injury, and the fourth stage, chilling injury.

• 한국정밀공학회지
• /
• 제3권4호
• /
• pp.53-63
• /
• 1986

In this study, the stress distribution of rectangular bar under torsion, when warping of both ends is free or constrained, is investigated. Method of separation of variable and Fourier Series are used for the theoretical analysis, and 3dimensional photoelastic stress-freezing method for experimental analysis. The main results are as follows; 1) In the case of warping-constrained rectangular bar, the normal stresses are negligible because they are less then 0.5% of the shear stresses. The maximum normal stress is placed on the point of y=0.61 b when b/a=1 and it gradually moves to the corner y=b when the value of b/a is increased. 2) According to increase of the value of b/a, on the crossection, the maximum shear stress is placed on the middle point of the long side (x=${\pm}a$, y=0) when warping of both ends is free but the middle of the short side (x=0, y=${\pm} b$) when warping is constrained. The stress distribution is straight line when warping is constrained, namely, the stress distribution is proportional to the distance from the axis of centroid, but parabolic when warping is free. 3) The values of the combined stress of warping-constrained bar, if the influence of the loaded point is neglected, are generally smaller than those of warping-free.

• 대한기계학회논문집
• /
• 제7권4호
• /
• pp.434-440
• /
• 1983

For the determination of stress intensity factors, three methods have been used conventionally; the photoelastic method, the compliance method and the electrical resistance method. These methods, however, have common short coming upon experimental performance; the difficulty of cutting out sharp crack tips and arbitray crack forms similar to the practical one on the specimen. to eliminate this flaw, one of the author previously presented new methods, that is, for the determination of $K_{III}$ mode, the membrane analogy was applied and the slab analogy was used for the determination of $K_{I}$ and $K_{II}$ . The validity of this method was proved through the performance of a series of experiments of which theoretical solution are known.n.n.

• 한국구조물진단유지관리공학회 논문집
• /
• 제25권4호
• /
• pp.46-55
• /
• 2021

콘크리트 구조물은 외부 극한기후환경에 노출 될 경우 공용년수가 증가할수록 다양한 문제점들이 발생할 수 있다. 이러한 문제들 중 최근 가장 문제가 되고 있는 폭우, 폭설과 같은 극한 기후요소의 작용으로 동결융해 현상이 발생한다. 본 연구에서는 서울의 경우, 동결융해가 발생하는 기간 동안에 매우 건조한 날씨를 나타내기 때문에 KS F 2456 를 참고하여 콘크리트의 기중 급속 동결 융해 시험법을 제시하였다. 콘크리트 공시체 및 철근콘크리트 휨 부재를 제작하여 0, 100, 200, 300 사이클의 기중 급속 동결 융해를 수행하였으며 성능 평가를 통해 각 실험체의 재료 및 부재 단위에서의 성능 저하를 확인하였다. 300사이클까지 기중 급속 동결 융해를 수행한 설계 강도 24 MPa의 콘크리트 압축 강도는 5.24 MPa(21%) 만큼 감소하며, 기중 급속 동결 융해가 진행될수록 콘크리트의 재료적 강도 감소에 의해 철근콘크리트 휨 부재의 철근의 응력 부담이 증가되어 지진과 같은 외력 발생에 따른 구조물의 에너지 흡수(소산) 능력이 감소한다.

• 한국지반공학회논문집
• /
• 제38권8호
• /
• pp.7-15
• /
• 2022

대부분의 선행연구는 동결 삼축압축시험 수행 시, 몰드를 사용하여 시료를 조성하고 단방향으로 동결을 진행하였다. 이는 동결된 시료에 잔류응력이 발생할 가능성이 있기 때문에 인공동결공법이 적용된 지반을 모사하는데 한계가 있다. 본 연구에서는 기존 시험방법의 한계를 보완할 수 있는 시험장비 및 시험방법을 제안하고, 제안된 방법으로 온도 및 구속압력에 따른 동결 사질토의 역학적 특성을 평가하였다. 동결온도가 낮아질수록 동결 사질토는 취성이 증가하였고, 부동수분의 감소 및 얼음자체의 강도 증가로 인하여 강도가 증가하였다. 구속압력의 증가는 강도저감 효과를 발생시키는 압력융해 현상과 강도증진 효과를 발생시키는 흙 입자의 마찰력 증가 모두를 야기하였다. 이처럼 동결 사질토의 역학적 거동은 구속압력과 동결온도의 복합적인 영향을 받는 것으로 나타났다.

• 대한조선학회논문집
• /
• 제49권6호
• /
• pp.541-549
• /
• 2012

The study adopted a freezing prevention method of the upper deck which used heating coil, and carried out numerical analysis by using ANSYS 13.0 CFD for design guide of the vessel operating in cold region. It is based on the experimental results of the anti-icing performance tests which were carried at cold room chamber in MOERI. Numerical analysis for the design guide was performed by considering S.S.T. (Shear Stress Transport) turbulent model for flow separation effects and the turbulence which occurred in interfaces of the numerical model in order to express appropriate heat transmission phenomenon. The numerical result shows average temperature of the upper deck surface appeared similarly compared with the indoor chamber test. The design guide for optimum freezing prevention presented through heat transmission capability and interval of the heat coil in various outdoor temperature($10^{\circ}C{\sim}-30^{\circ}C$) and wind speed(1m/s~7m/s).

• 대한기계학회논문집
• /
• 제19권8호
• /
• pp.1876-1888
• /
• 1995

In this paper, glass surface-mat reinforced epoxy(G.S.R.E.) is developed, It is assured that the material(G.S.R.E.) can be used as photoelastic model material and it satisfy with the required properties of photoelastic model material. Therefore, the material can be used as model material of transparent photoelastic experiment when we analyze the stress distributions of transversely isotropic material by photoelastic experiment. When we use G.S.R.E. as photoelastic experiment model material, we had better use the G.S.R.E. which fiber volume ratio is less than 0.7% in the high temperature(stress freezing method) and than 1.74% in the room temperature. Relationships between stress fringe value and elastic modulus in transversely isotropic material are developed in this paper, it is assured by experiment that they are established in the room temperature or in the high temperature. Therefore we can obtain stress fringe value or elastic modulus from the relationships between stress fringe value and elastic modulus.