Browse > Article
http://dx.doi.org/10.3744/SNAK.2012.49.6.541

A Study on the Anti-Icing Performance Evaluating and Design Guide by Heating Coil for Upper Deck of Icebreaking Vessels  

Lee, Jong-Chan (Department of Ocean Engineering, Korea Maritime University)
Seo, Young-Kyo (Department of Ocean Engineering, Korea Maritime University)
Lee, Chun-Ju (KIOST (Korea Institute of Ocean Science & Technology), Maritime & Ocean Engineering Research Department)
Publication Information
Journal of the Society of Naval Architects of Korea / v.49, no.6, 2012 , pp. 541-549 More about this Journal
Abstract
The study adopted a freezing prevention method of the upper deck which used heating coil, and carried out numerical analysis by using ANSYS 13.0 CFD for design guide of the vessel operating in cold region. It is based on the experimental results of the anti-icing performance tests which were carried at cold room chamber in MOERI. Numerical analysis for the design guide was performed by considering S.S.T. (Shear Stress Transport) turbulent model for flow separation effects and the turbulence which occurred in interfaces of the numerical model in order to express appropriate heat transmission phenomenon. The numerical result shows average temperature of the upper deck surface appeared similarly compared with the indoor chamber test. The design guide for optimum freezing prevention presented through heat transmission capability and interval of the heat coil in various outdoor temperature($10^{\circ}C{\sim}-30^{\circ}C$) and wind speed(1m/s~7m/s).
Keywords
CFD; Anti-icing; Shear Stress Transport(S.S.T.); Heat transmissions; Heating coil;
Citations & Related Records
Times Cited By KSCI : 4  (Citation Analysis)
연도 인용수 순위
1 Kang, H.K. Kim, K.P. & Kim, D.H., 2010. Requirements of Mechanical and Environmental Conditions on Winterization of Vessels Intended for Cold Climate Operation. Collection of dissertations of The Korea Society of Marine Engineering, 2010(10), pp.83-86.
2 ANSYS Inc., 2010. ANSYS User's Manual Fluent Theory Guide. Version 13.0. ANSYS Inc.: USA.
3 Kim, K.P. Kang, H.K. Kim, D.H. & Ha, T.B., 2010. International Convention & Class Requirement of Equipments for Ice Class Vessels Collection of dissertations of The Korea Society of Marine Engineering. Journal of the Korea Society for Power System Engineering, 2(), pp.73-80.
4 Kim, Y.K. Yang, J.S. Kim, K.C. & Ji, H.S., 2011. Numerical Study on the Performance Assessment for Defrost and De-Icing Modes. Journal of mechanical science and technology, 35(2), pp.161-168.   과학기술학회마을   DOI   ScienceOn
5 Choi, K.S., 1995. Prospects of the Domestic and Foreign Academic Research in the Polar Engineering. Journal of the Society of Naval Architects of Korea, 32(32), pp.27-32.
6 Ministry of Knowledge Economy, 2012. Cold Region Design Specification and Winterization(PNS133C).
7 Jeong, S.Y. Lee, C.J. & Cho, S.R., 2011a. A Study on Anti-icing Technique for Ballast Water of Icebreaking Vessels Operating in Ice-covered Water. Journal of the Society of Naval Architects of Korea, 48(1), pp.93-97.   과학기술학회마을   DOI   ScienceOn
8 Jeong, S.Y. Chun, E.J. Cho, S.R. & Lee, C.J., 2011b. A Study on Anti-icing Technique for Weather-Tight Door of Ice-Strengthened Vessel. Journal of the Society of Naval Architects of Korea, 48(6), pp.575-580.   과학기술학회마을   DOI   ScienceOn
9 Juen, H.Y. Lee, C.K. Bae, H.J. & Lee, S. J., 2005. A Study on Performance Test and Verification of Heat Transfer characteristics in Automobile Rear Window Heater. Journal of the Korea Society for Power System Engineering, 9(2), pp.73-80.   과학기술학회마을