• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.11
• /
• pp.68-73
• /
• 1999

In this paper, the residual stresses for the wide-band laser heat treatment using a polygon mirror have been analyzed. The results of FE analysis are compared with the experimental results. ANSYS Version 5.3, a commercial FE-code, is used for the FE stress analysis. The structural analysis was performed on after thermal analysis. The residual stress distribution across the hardened area was measured by the X-ray diffraction technique. The laser hardening conditions, 2kW laser power and 2mm/s travel speed, were used for the experiment and the FE analysis. Analysis results, which is maximum tensile residual stress is about 143MPa and maximum compressive residual stress is about -380MPa. Under same parameters with the analysis, experimental results indicate that MTRS is about 152MPa and MCRS is about -312MPa. The experimental results is about 6% higher than the FE analysis. As a result, residual stress data from the experiment close well with that of the FE analysis.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2010.05a
• /
• pp.53-54
• /
• 2010

This study investigates stress analysis in nodal zone by using Complementary Pole Method (CPM). The CPM is convenient tools for the stress or strain analysis since it enables to express parallel directions of the normal stress or strain on the Mohr Circle. In this study, it is suggested to use of CPM to analysis stress or strain in the field of Concrete Plasticity.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.10
• /
• pp.1702-1711
• /
• 1997

A numerical study for the number of terms of a power series stress function and the effect of hybrid element size on stress analysis around a hole in loaded orthotropic composites is presented. The hybrid method coupling experimental and/or theoretical inputs and complex variable formulations involving conformal mappings and analytical continuity is used to calculate tangential stress on the boundary of the hole in uniaxially loaded, finite width glass epoxy tensile plate. The tests are done by rarying the number of terms, element size and nodal locations on the external boundary of the hybrid region. The numerical results indicate that the hybrid method is accurate and powerful in both experimental and numerical stress analysis.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.05a
• /
• pp.248-251
• /
• 2009

AB100 & CB100 are general products in the steel beam of the section shape. They are applied for construction, welding and shipbuilding structures. But currently roll damages are generated in the intermediate & finish mills during producing AB 100, CB100. The goal of this project is to conduct rolling & roll stress analysis using the 3D FEM program and to research the things which roll diameter affects roll stress. By the analysis results, it is determined that the recording roll stress where the roll diameter will be big comes to be small, and it is recognized that roll damage occurrences of finish rolling mills can be high by roll stress analysis results.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.1
• /
• pp.52-60
• /
• 2000

In order to design a reliable machine component efficiently, it is necessary to set up the process of durability analysis using computer simulation technique. In this paper, two methods for dynamic stress calculation, which are basis of durability analysis, are reviewed. Then, a user-oriented dynamic stress analysis program is developed from these two algorithms together with a general-purpose flexible body dynamic analysis and structural analysis programs. Finally, a slider-crank mechanism which has a flexible connecting-rod is chosen to show the special characteristics of these two dynamic stress calculation methods.

• The Journal of Korean Academy of Prosthodontics
• /
• v.44 no.5
• /
• pp.584-593
• /
• 2006

Statement of problem : Dental implant which has been developed gradually through many experiments and clinical applications is presently used to various dental prosthetic treatments. To conduct a successful function of implant prosthesis in oral cavity for a long time, it is important that not only structure materials must have the biocompatibility, but also the prosthesis must be designed for the stress, which is occurred in occlusion, to scatter adequately of load support. Therefore, it is essential to give the consideration about the stress analysis of supporting tissues for higher successful rates. Purpose : Recently, many implant manufacturing company produce various taper design of root form implant, the fixture is often selected. However, the stress analysis of taper form fixture still requires more studies. Material and method : This study we make the element models that five implant fixture; Branemark system(Nobel Biocare, Gothenberg, Sweden), Camlog system(Altatec, Germany), Astra system(Astra Tech, Sweden), 3i system(Implant Innovations Inc, USA), Avana system(Osstem, Korea) were placed in the area of mandibular first premolar and prosthesis fabricated, which we compared with stress distribution using the three-dimension finite element analysis under two loading condition. Results : This study compares the aspect of stress distribution of each system with the standard of Von mises stress, among many resulted from finite element analysis so that this research gets the following results. 1. In all implant system, oblique loading of maximum Von mises stress of implant, alveolar bone and crown is higher than vertical loading of those. 2. Regardless of loading conditions and type of system, cortical bone which contacts with implant fixture top area has high stress, and cancellous bone has a little stress. under the vertical loading, maximum Von mises stress is more higher in order of Branemark, Camlog, Astra, 3i, Avana. under the horizontal loading, maximum Von mises is more higher in order of Camlog, Branemark, Astra, 3i, Avana.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.8
• /
• pp.70-75
• /
• 2010

The aim of this study is to evaluate the axial residual stress in multi-pass drawn high carbon steel wire by using FE analysis and XRD. When FE analysis is applied to evaluate the residual stress in drawn wire of multi-pass drawing process, obtaining the reliable effective stress-strain curve at high strain is very important. In this study, a model, which can express the reliable effective stress-strain curve at high strain, is introduced based on the Bridgman correction and tensile test for multi-pass drawn high carbon steel wires. By using the introduced model, FE analysis was carried out to evaluate the axial residual stress in the drawn wires. Finally, the effectiveness of the FE analysis with the introduced stress-strain relation was verified by the measurement of residual stress in the drawn wires through XRD. As a result, the evaluated residual stress of FE analysis shows good agreement with the measured residual stress.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.4
• /
• pp.401-408
• /
• 2009

This study is performed to check the three dimensional characteristics of residual stress in the dissimilar metal weld. Although two dimensional analysis has been widely used for the assessment of weld residual stress, it has limitations to understand the stress distribution of the third direction. 3-D analysis was done to understand residual stress distribution of the welded plate. A simple butt-welded plate was considered to show the stress variation on all direction. A mock-up plate weldment was fabricated with SA-508 and F316L, which are widely used in nuclear power plants. The analysis results were validated with the measured values in the mock-up.

• The Korean Journal of Community Living Science
• /
• v.23 no.2
• /
• pp.163-175
• /
• 2012

The purpose of this study was to examine the effects of mother and father's parenting efficacy, parenting stress on children's daily stress. The subjects were 292 children selected from 4 elementary schools and their mothers and fathers. Data was collected using the parenting efficacy index, parenting stress index, and children's daily stress inventory, and was statistically analyzed using t-test, one way ANOVA(Scheffe test), correlation analysis and multiple regression analysis. The study showed that there were some significant differences in children's daily stress according to the children's grade and gender. Correlation analysis indicated that the mother's parenting efficacy and children's daily stress had negative correlation, and also father's parenting efficacy and children's daily stress had negative correlation. Further, mother's parenting stress had positive correlation with children's daily stress, and father's parenting stress as well. It was also found that parenting efficacy of mother's general parenting ability, parenting efficacy of father's discipline ability, father's stress of difficult child, mother's educational distress, and children's gender were all significant predictors of the children's daily stress.

• Journal of the Korean Society of School Health
• /
• v.33 no.3
• /
• pp.175-183
• /
• 2020

Purpose: The purpose of this study was to examine the influence of appearance stress, job-seeking stress, and college life stress on eating attitude in nursing students. Methods: Data were collected in September and October of 2017. A total of 153 fourth-year nursing students were included in the analysis. Descriptive statistics, t-test, ANOVA, correlation and multiple regression analysis were conducted using SAS 9.2. Results: The mean score for eating attitude was 2.71±0.56. From the univariate analysis, appearance, job-seeking, and college life stress scores were all significantly related to eating attitude (r=.26, .35, .30 respectively, and p for all <.001). After controlling for covariates, job-seeking stress and college life stress were significantly related to eating attitude (β=.20 and 0.17 respectively, and p=.005 and .024 respectively). Among the covariates, experience of diet and physical anxiety were significantly associated with eating behavior (β=.33 and .24 respectively, and p<.001 and .008 respectively). Conclusion: Job-seeking stress had the biggest influence on eating attitude, followed by college life stress. Therefore, in order to promote healthy eating attitudes in fourth-year nursing students, preventive measures focusing on decreasing job-seeking stress should be considered as a top priority.