• Journal of the Korean Society of Safety
• /
• v.32 no.3
• /
• pp.117-122
• /
• 2017

In this study, we studied the ride quality considering the deterioration effects of the three type couplers (single, double, and ring types) for EMUs. In order to know the impact occurred when an urban transit vehicle is under breaking, we tested the conditions of the service brake and the emergency brake. Normal coupler models without any slack showed similar dynamic performance results under all breaking conditions. But if the couplers become old, the initial pre-stresses are removed because of permanent compressive deformation in rubber. For three types of the old coupler models without the initial pre-stress, we evaluated dynamic performances of each type. As the results, the maximum and average acceleration levels of the double type and the ring type were similarly low in all conditions. But the accelerations of the single type coupler was high when compared to those of the double and ring types. In addition, Jerk value of the single type model associated with ride quality was high up to 15 times to the ring type in condition of the service braking in empty vehicle weight. Jerk value of the double type model was high up to 6 times to the ring type.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.12
• /
• pp.5684-5688
• /
• 2012

This paper aims to design the leaf spring of high fatigue life which guides the moving part of the horizontal linear vibrating actuator. The vertical linear vibrating actuator has been used as the vibration device for haptic and alarm function on smart phone. However, the vibrating actuator has a major cause on the limitation to make smart phone slim because of its own characteristic of vertical direction vibration. The horizontally linear vibrating actuator for smart phone slimness has been developed in recent years. One of the most significant parts of horizontal vibrating linear actuator is the guide spring which supports moving part of actuator and enables actuator to vibrate elastically. Various types of leaf springs were designed and analyzed to get the required stiffness with high fatigue life through the stress analysis using commercial structural analysis program, ANSYS. The experiments were performed with prototypes to measure vibration acceleration and life time of leaf spring.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.1
• /
• pp.132-138
• /
• 2011

A micromachined silicon accelerometer capable of surviving and detecting very high accelerations(up to 200,000 times the gravitational acceleration) is necessary for a high impact accelerometer for earth-penetration weapons applications. We adopted as a reference model a piezoresistive type silicon micromachined high-shock accelerometer with a bonded hinge structure and performed structural analyses such as stress, modal, and transient dynamic responses and sensor sensitivity simulation for the selected device using piezoresistive-structural coupled-field analysis. In addition, structural optimization was introduced to improve the performances of the accelerometer against the initial design of the reference model. The design objective here was to maximize the sensor sensitivity subject to a set of design constraints on the impact endurance of the structure, dynamic characteristics, the fundamental frequency and the transverse sensitivities by changing the dimensions of the width, sensing beams, and hinges which have significant effects on the performances. Through the optimization, we could increase the sensor sensitivity by more than 70% from the initial value of $0.267{\mu}V/G$ satisfying all the imposed design constraints. The suggested simulation and optimization have been proved very successful to design high impact microaccelerometers and therefore can be easily applied to develop and improve other piezoresistive type sensors and actuators.

• Journal of Korean Association for Spatial Structures
• /
• v.8 no.4
• /
• pp.91-100
• /
• 2008

In this study, the vibration control performance of high-rise building structures connected by a sky-bridge has been investigated. The philosophy of vibration control using sky-bridges is to allow structures with different dynamic characteristics to exert control forces upon one another through sky-bridges to reduce the overall responses of the system. The the high-rise building structure connected by sky-bridge with 49 and 42 stories was used in this study to investigate the displacement, acceleration, reaction of bearings and stress of sky-bridge by analytical methods. To this end, historical earthquakes, an artificial earthquake and wind force time histories obtained from wind tunnel tests were used. Based on the analytial results, the use of sky-bridge can be effective in reducing the structural responses of high-rise buildings against wind and seismic loads.

• The Journal of the Korea Contents Association
• /
• v.10 no.11
• /
• pp.262-274
• /
• 2010

In Welfare Center for the disabled, under the Government's information acceleration plan, the computer system has been developed starting from work standardization in 2001 but it has been emphasized only on the technical and customer convenience side leaving out preparation for the side effects of them. Therefore this article will seek the necessity of personal information protection, legal basis in the Welfare Center for the disabled. Additionally after analyzing current status for the personal security of Welfare Center for the disabled, establishing an alternative plan for personal security policy's way could be addressed. Increasing education for awareness stress of personal information security, and preparing institutional protection apparatus from applying life cycle of personal information would be an alternative plan for personal information protection for Welfare Center for the disabled. Also frequent monitoring of accessing personal information from the computerized system should be achieved. It is impossible to recover damage caused by leak of personal information although post actions are progressed. From this essay, awareness of personal information protection should be newly revised for both the Social Welfare Organization and the Disabled welfare center, and also technical, institutional strategy's action should be arranged.

• Earthquakes and Structures
• /
• v.7 no.4
• /
• pp.571-586
• /
• 2014

This paper presents experimental and numerical study on seismic performance of a super tall steel tower structure. The steel tower, with a height of 388 meters, employs a steel space truss with spiral steel columns to serve as its main lateral load resisting system. Moreover, this space truss was surrounded by the spiral steel columns to form a steel mega system in order to support a 12-story platform building which is located from the height of 230 meters to 263 meters. A 1/40 scaled model for this tower structure was made and tested on shake table under a series of one- and two-dimensional earthquake excitations with gradually increasing acceleration amplitudes. The test model performed elastically up to the seismic excitations representing the earthquakes with a return period of 475 years, and the test model also survived with limited damages under the seismic excitations representing the earthquakes with a return period 2475 years. A finite element model for the prototype structure was further developed and verified. It was noted that the model predictions on dynamic properties and displacement responses agreed reasonably well with test results. The maximum inter-story drift of the tower structure was obtained, and the stress in the steel members was investigated. Results indicated that larger displacement responses were observed for the section from the height of 50 meters to 100 meters in the tower structure. For structural design, applicable measures should be adopted to increase the stiffness and ductility for this section in order to avoid excessive deformations, and to improve the serviceability of the prototype structure.

• Journal of Applied Reliability
• /
• v.17 no.1
• /
• pp.50-57
• /
• 2017

Purpose : This paper is a comparative analysis results of the fatigue test for dental implants and accelerated life test by using a static type loading device commonly used in Korea and a dynamic type loading device (universal-joint) recommended by FDA. Methods : Fatigue tests of dental implant is based on ISO 14801 and classified into static load test and dynamic load test. The tests were carried out on three test specimens by four load stress steps under each loading device. For analysis on failure mode such as crack, fracture and permanent deformation of test specimens, we used X-ray three-dimensional computed tomography on test specimens before and after the fatigue tests. The design of the accelerated life test was based on the analysis results of the fatigue life data obtained from the dynamic load test and the statistical analysis software (Minitab ver.15) was used to analyze the appropriate life distribution. Results : As a result of the fatigue tests and the accelerated life tests at same acceleration condition under each test method, the fatigue life under the dynamic type loading device (universal-joint) was shorter than when static type loading device was applied. Conclusion : This paper can be used as a reference when the universal-joint type loading device for implants fatigue test is applied as ISO 14801.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.20 no.3
• /
• pp.82-97
• /
• 2007

Objective : Cortex of Ulmi pumilae(CUP) has been used to treat several diseases including boil, swelling, and scabies etc. Recently, CUP was known to have wrinkle care and whitening actions. But, It's exact mechanisms are unclear. Methods : The present study was designed to investigate effects of CUP on Human HaCaT keratinocyte and malignant melanoma cells such as SK-MEL-2 and B16F10 in terms of cell viabilities, proliferations, DPPH free radical scavenging activities, oxygen free radical productions and inhibitory action on elastase activities. Results : CUP accelerated proliferation of HaCaT keratinocytes in the lower concentration. CUP also prevented cell death of HaCaT induced by Hydrogen peroxide, which products oxygen free radicals. On the contrary, CUP did not affect proliferations of SK-MEL-2 or B16F10. Futhermore, CUP showed inhibitory action against SK-MEL-2 proliferation at the concentration of $500{\mu}g/m{\ell}$ In addition, CUP was shown to have DPPH free radical scavenging activities and also have inhibitory effects on elastase activities too. On the fluorescent examinations, the present author knows that CUP elevated production levels of oxygen free radicals in malignant melanoma cell, SK-MEL-2. Conclusions : These results suggest that CUP has possibilities of usage for functional cosmetics which have wrinkle care and whitening activities and related mechanisms are involved in inhibition of elastase action and acceleration of oxidative stress in melanoma cell.

• Journal of the Microelectronics and Packaging Society
• /
• v.17 no.3
• /
• pp.65-69
• /
• 2010

In this study, we investigated the effects of UBM(Under Bump Metallization) and solder composition on the drop impact reliability of wafer level packaging. Fan-in type WLP chips were prepared with different solder ball composition (Sn3.0Ag0.5Cu, and Sn1.0Ag0.5Cu) and UBM (Cu 10 ${\mu}m$, Cu 5 ${\mu}m$\Ni 3 ${\mu}m$). Drop test was performed up to 200 cycles with 1500G acceleration according to JESD22-B111. Cu\Ni UBM showed better drop performance than Cu UBM, which could be attributed to suppression of IMC formation by Ni diffusion barrier. SAC105 was slightly better than SAC305 in terms of MTTF. Drop failure occurred at board side for Cu UBM and chip side for Cu\Ni UBM, independent of solder composition. Corner and center chip position on the board were found to have the shortest drop lifetime due to stress waves generated from impact.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.26 no.5
• /
• pp.901-907
• /
• 1997

The purpose of this study was to investigate the effects of green tea catechin o n free radical generation system and peroxidative damage in the liver of streptozotocin(STZ)-induced diabetic rats. Spragu-Dawley male rats weighing 150$\pm$10gm were randomly assigned to one normal and three STZ-induced diabetic groups; diabetic groups were classified to catechin free diet(DM-oC group), 0.5% catechin diet(DM-0.5C group) and 1% catechin diet(DM-1C group) according to the levels of dietary catechin supplementation. Diabetes was experimentally induced by intravenous injection of 55mg/kg of body wt of STZ in citrate buffer(pH 4.3) after feeding of three experimental diet for 4 weeks. Animals were sacrificed at the 6th day of diabetic states. Activities of serum glutamic oxaloacetic transaminase(GPT) in DM-oC groups were higher than those of the normal group, and those in catechin supplementation group were similar to those of the normal group. Liver lipid peroxide values increased by 153%, 49%, and 27% in Dm-oC, DM-0.5C and DM-0C and Dm-1C but was not significantly different in catechin supplementation groups compared with the normal group, and liver cytochrome $P_{450}$ contents was similar to result of XOD activity. In electron microscopic examination of liver, lysosome was relatively scattered in Dm-oC and Dm-0.5C group and preserved normal shapes in DM-1C group. The present results indicate that STZ-induced diabetic rats are more sensitive to oxidative stress, leading to the acceleration of lipid peroxidation process, but this was reduced by anti-oxidative effect of high level of dietary catechin. It is concluded that dietary catechin serves as powerful antioxidant against lipid peroxidation in diabetic rats.