• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.11-14
• /
• 2003

The purpose of this paper is to offer a base data of specification, so that the strength information of concrete in the structure for irrigation can be rationally determined the coefficient of variation of an existing irrigation structure and the best fit the ready-mixed concrete strength to specified strength $f_ck$. From analysis of concrete cylinders from about 30 numbers in southern Korea, it was concluded that the coefficient of variation of cylinder strength were approximately 5.9%. On the basis of the core strength test data, it was appeared that the average coefficient of variation for the existing irrigation structure can be taken as 17.8% for strength level 21MPa.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.675-678
• /
• 2003

Experimental results for variation of concrete strength according to vibration time control for fresh concrete were given. Vibration velocity, time before vibration and vibrating time were used as experimental parameters. Compressive strength, split tensile strength, ana bond strength were investigated and then fracture surfaces of split tensile strength specimen were observed. From the experimental results, it could be concluded that there may be no decrease in concrete strengths if time before vibration will be sustained at least for more than 3 hours.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2018년도 추계학술대회
• /
• pp.251-254
• /
• 2018

주변 환경 변화에 따라 무선 수신 신호가 변화되는 현상을 활용한 Internet of Things(IoT) 시스템에 대한 연구가 활발히 진행되고 있다. 본 논문에서는 고정된 송수신기 간 주기적 신호 교환 시, 수신 신호가 주변 온도 변화에 따라 변화함을 증명하고, 수신 신호 변화를 활용한 화재 감지 기법을 제안한다. 제안 기법은 수신 신호 변화 감지부와 수신기 내부 온도 감지부로 구성되며, 수신기 내부 온도 감지부는 무선 채널 환경 변화에 따른 수신 신호 변화를 화재 발생으로 감지됨을 방지한다. 제안 기법은 화재 감지를 위해 별도의 장치 추가 없이 기존 수신기에 소프트웨어 개선을 통해 지원가능하다는 장점을 지닌다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1995년도 봄 학술발표회 논문집
• /
• pp.154-159
• /
• 1995

Cold weather concrete presents the many characteristic variation of quality, according to the mixing and cooling point, the cooling time and the quantity of air besides the compressive strength of concrete. Thus, in this study to verify the character of cold-weather concrete we make the concrete specimens at laboratory and cool them at cooling-melting machine and then test the 7days compressive strength of them, with the variation of compressive strength of concrete, cooling point, cooling time, cooling weather and air quantity. At the results, the compressive strength of concrete decrease in the case of early cooling point, long cooling time, low cooling temperature and the low design compressive strength

• 한국지반환경공학회 논문집
• /
• 제11권4호
• /
• pp.19-24
• /
• 2010

사면의 거동에 관한 종래의 해석 기법은 사면거동을 시간과 변위의 2차원 크리프로 해석하는 것이었으나, 이러한 해석 기법은 강우에 의한 응력변화를 고려 않고 시간에 따른 변위만을 고려하여, 강우 시 사면의 거동 및 붕괴를 설명하지 못한다. 또한 강우에 의한 이력현상으로 인해 파괴면내의 전단에너지가 감소한다. 크리프 해석은 응력항을, 이력현상 해석은 시간항을 무시한 해석이므로, 두 가지 해석을 결합하여, 사면의 거동을 해석한다면, 응력변화, 변위 및 시간을 모두 고려한 실제 사면의 거동해석이 됨을 알 수 있다. 그러나 응력변화에 관한 항은, 강우로 인한 실제 사면의 침투 및 배수 시, 전단응력의 변화 및 전단강도의 변화를 동시에 유발하므로, 이 두 항을 동시에 고려할 수 있는 안전계수항으로 바꾸어야 한다. 본 논문은 강우의 지반침투 및 배수로 인하여 사면의 단위중량이 변하는 과정에 대한 크리프와 이력현상을 고려할 수 있는 결합해석으로 고찰하고 이에 따른 사면붕괴에 관한 전단응력과 전단강도의 변화 및 안전계수변화를 3차원으로 나타내고자 수행한 결과이다.

• Journal of the Korean Wood Science and Technology
• /
• 제36권2호
• /
• pp.56-62
• /
• 2008

The surface and edge structure of OSB is defined by surface strand orientation and strand mat thickness variation parallel to the length of the panel using video-microscope. The bending strength of OSB was correlated with surface strand orientation and decreased with increasing the orientation angle in the direction parallel to length of the panel. Average strand mat thickness variation parallel to the length of the panel did not influence the bending strength, but the bonding characteristics among the outermost strands affects the bending strength of OSB. Hankinson formula can be used to predicts the MOE according to strand orientation in the surface of OSB, and more precise strand alignment and reducing thickness variation should be important in the structural performance of OSB panels.

• Journal of the Korean Wood Science and Technology
• /
• 제37권5호
• /
• pp.465-473
• /
• 2009

Three failure theories were studied to evaluate the wood strength variation with grain slope. Maximum stress theory, Tsai-Hill theory and Hankinson formula were presented to hypothesize the failure of wood according to grain slope to loading direction. Red pine and Japanese larch were used as materials to simulate failure strength prediction with grain slope. Calculation of strength results was that the strength of wood drops rapidly between parallel to grain orientation (0 degree) and 15 degree grain orientation. The strength of wood with grain orientation were somewhat different at small grain angles among failure theories, and this tendency was due to tension and compression distinction, and shear accounting in each theories. For the above 45 degree grain orientation, the predicted failure strength of wood with grain variation were very close in each failure theories and were useful in assessing failure strength of wood. The applicable these theories should be considered that the wood has different behavior in tension and compression, and this lead to different strength at small grain angles in each theories. Furthermore, reconsideration is needed to assess the failure strength of wood at small grain angles in Hankinson formula and further studies are necessary to accounting for shear behavior at small grain angles.

• 대한기계학회논문집A
• /
• 제32권6호
• /
• pp.512-518
• /
• 2008

This study would like to evaluate the influences with the strength mismatch and the variation of the welding width of the narrow gap welding for the plastic parameter, the major constant determining the plastic ${\eta}$-factor of J-Integral, using 3-D FEM. For this, we evaluate the plastic ${\eta}$-factor according to the variation of the strength mismatch of weldment with same materials and welding width through FEM. Also, we proposed the equation of plastic ${\eta}$-factor considering the variation of the strength mismatch of weldment with similar materials and welding width.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 봄 학술발표회 논문집
• /
• pp.591-598
• /
• 2000

In the present study, the variation of settlement, pore water pressure and undrained shear strength through model tests were measured. Also, the variation of water content, unit weight and shear strength by the vane shear tests were observed. In this study, appropriate deposit time of construction equipments used in treatment of hydraulic fills is determined from the prediction curve of increased shear strength in dredged fills.

• 소음진동
• /
• 제7권3호
• /
• pp.411-418
• /
• 1997

A method to analyze the axisymmetric vibration and the internal pressure of the fluid filled, strength member embedded infinite cylindrical shell under the condition of axial static tension load applied is presented. As an example, the hose wall vibration and the internal pressure variation characteristics of a fluid filled infinite polyurethane hose are analyzed and dicussed, under the effects of the variation of the embedded strength members and the response positions.