• 한국환경과학회지
• /
• 제14권8호
• /
• pp.739-748
• /
• 2005

The purpose of this study is to analyze seasonal changes in structure and landscape of Gongji stream corridor in Chuncheon, and to suggest some guidelines to contribute to creating a desirable close-to- nature stream. The study seasonally surveyed floodplain and revetment conditions, channel micro-topography, streamflow level and velocity, and vegetational cover. Flooding, water level, and vegetation were major factors of affecting seasonal changes in streambed structure and stream landscape. Small sand bars and islands were considerably disturbed by flooding and water level change. However, large islands and sand bars in the upper and middle section of the study stream remained or reappeared even after flooding. Flooding also tended to repeat channel sedimentation at the same spot. Controlling water volume of the Euiam Lake, which is adjacent to the study stream, caused higher water level downstream in the dry seasons. The majority of vegetation in sand bars and islands was washed away by the floods. Vehicle passing, crop cultivation, and ball game were other elements which disturbed vegetation in the floodplain. Creating a close-to-nature stream should reflect micro-topographical changes of channel by flooding, prevent improper vehicle entry and human use, and remove concrete material in the revetment and floodplain.

• 한국환경보건학회지
• /
• 제28권4호
• /
• pp.23-26
• /
• 2002

This study was conducted to investigate water quality after construction of straightened concrete block at Tongbok stream and difference of water quality between natural stream and municipal stream artificially straightened. In Tongbok upstream which was natural block having a variety of sand, there was ability to purify pollutants by microorganism and filtration. There was ability to purify pollutants in natural section of the natural midstream which have a diversity and a plenty of sands. In Tongbok upstream BOD concentration was lower than that of reservoir, but in midstream which was straightened concrete block without sand, BOD and NH$_3$-N concentration was higher than that of upstream and deteriorated water quality.

• 한국수자원학회논문집
• /
• 제51권3호
• /
• pp.183-193
• /
• 2018

본 연구에서는 내성천의 영주댐 하류 구간에서의 안정하도 단면 평가를 수행하기 위해 하도형성유량을 산정하였으며 이를 기준으로 용혈지점에서의 안정하도 경사, 수심, 하폭에 대한 평가를 수행하였다. 하도형성유량과 안정하도 평가를 수행하기 위해 사용된 자료는 용혈지점에서 영주댐 건설 전에 수집된 자료이다. 특정 재현기간별 유량, 유효유량, 만제유량을 산정하여 비교 검토를 통해 최종적으로 만제유량인 $260m^3/s$을 하도형성유량으로 채택하였다. 또한 안정하도 설계 프로그램(SCAD)을 활용하여 Ackers and White, Brownlie, Engelund and Hansen, Yang 공식을 각각 적용하여 대상단면의 안정하도를 평가하였다. 그 결과, 모든 유사이송공식이 현재 하도의 하상경사인 0.00177보다 완만한 경사를 제시하는 것으로 나타났으며 하도의 바닥 폭을 설계구속인자로 고려할 경우 Ackers and White 공식을 적용하여 안정하도를 계산했을 때 안정하도의 수심이 현재 단면의 수심과 가장 근접한 것을 알 수 있었다.

• 환경영향평가
• /
• 제18권3호
• /
• pp.171-183
• /
• 2009

This study aims to analyze the sedimentary environment change in mid-channel bar of the lower Geum river basin after the construction of the estuary barrage using multi-temporal satellite data and GIS. The sedimentary environment changes were observed in mid-channel bar areas. The mid-channel bar F was found to have been newly formed for 10 years(1996-2006), whereas the mid-channel bar B located between mid-channel bar A and C has disappeared by erosion during the same periods. When examined by section, the areas of the mid-channel bar in the upper stream section from the Yipo's reference point generally increased due to the prevailing sedimentary environments, and those of the downstream section decreased where corrosive environments are dominant. In ternms of the centroid movement, the mid-channel bars grew up toward the downstream by switching erosion and accumulation, as sedimentation was prevailing in the downstream area of mid-channel bars and corrosion was dominant in the upper stream. Through grain size analysis, the study areas are divided into three sections according to the average grain size. In Section I, the mid-channel bars were formed as a result of sedimentary process of tides in the past. In Section II, the mid-channel bars were formed partly through the sedimentary process of rivers although the sedimentary process of tides is prevailing. In Section III, the mid-channel bars were formed mainly through the sedimentary process of rivers, even if it showed the sedimentary process of tides in the past.

• 한국수자원학회논문집
• /
• 제49권5호
• /
• pp.391-398
• /
• 2016

하천의 합류부 구간은 본류와 지류에서 유입되는 유량의 크기가 달라 복잡한 흐름을 형성하게 되며 이러한 흐름으로 인한 국부적인 구간에서의 하상변동 및 하안침식은 하도의 평면적 변화를 야기할 수 있다. 본 연구에서는 이러한 합류부 구간에서의 평면적 하도변화를 분석하기 위해 남한강과 금당천 합류부 지점을 대상으로 하상 퇴적 및 하안침식에 의한 하안선 이동을 2차원 수치모형인 CCHE2D를 활용하여 모의하였다. 모의결과, 본류의 좌안에서는 합류 전 구간에 비해 합류 후 구간에서의 하안선 이동 현상이 더 크게 발생한 것을 확인할 수 있었다. 또한 지류에서의 하안침식은 거의 발생하지 않으며, 지류 좌안과 합류 전 본류 우안에서는 유속 저하와 퇴적으로 인해 하안선이 제외지 쪽으로 이동하는 것을 확인하였다.

• 헤리티지:역사와 과학
• /
• 제43권1호
• /
• pp.118-127
• /
• 2010

본 연구는 전남 구례군 서시천에서 수달 배설물의 분포특성과 밀도를 조사한 것이다. 조사는 7개의 구간으로 나누어 2006년 1월부터 12월까지 6회에 걸쳐 배설지점수, 구배설물수, 신배설물수를 조사하였다. 조사결과 전 구간에서 배설지점수 222지점, 구배설물수 662개(60일 환산 718개), 신배설물수 364개가 관찰되었고 이들 모두 1월에 가장 많이 관찰되었다. 500m 거리당 평균밀도는 배설지점수가 26.9지점, 구배설물수가 88.6개, 신배설물수가 44.4개로 나타났다. 이들에 대하여 각각 구간별 비율의 월 변동을 분석한 결과 수달이 연중 특별히 선호하는 구간은 없으며 서시천의 전 구간을 고루 이용하고 있음을 시사했다.

• 한국습지학회지
• /
• 제10권1호
• /
• pp.11-20
• /
• 2008

본 연구에서는 수질모형의 적용 시 유량계수들의 적절한 추정방안을 살펴보았다. 유량계수들의 추정 시에 수리학적 유사구간의 최하류 단면을 기준으로 산정하는 것(기존의 관습적인 방법) 보다는 수리학적 유사구간 전체 단면을 고려하여 산정하는 것이 하천의 유속분포 또는 이동시간의 측면에서 보다 더 하천 유수의 흐름을 정확하게 표현할 수 있음을 알 수 있었다. 또한 어떤 특정 구간에서의 잘못된 유량계수의 추정은 수질 항목에 따라서는 해당구간 수질예측의 정확도뿐만 아니라 그 하류구간에서의 수질 예측에서도 오차가 계속 누적되는 것으로 나타남에 따라 유량계수의 산정에 보다 더 세심한 주의를 기울여야 할 것으로 판단된다.

• 소성∙가공
• /
• 제13권1호
• /
• pp.33-38
• /
• 2004

A new approach for the design of extrusion die surface of arbitrarily shaped section is presented. In order to generate the extrusion die surface. an automatic surface construction method based on B-spline surface and scalar field theory is proposed. The isothermal lines and stream lines designed in the scalar field are introduced to find the control points which are used in constructing B-spline surfaces. Intersected points between the isothermal lines and stream lines are used to construct B-spline surfaces. The inlet and outlet profiles are precisely described with B-spline curves by using the centripetal method for uniform parameterization. The extrusion die surface is generated by using the cubic curve interpolation in the u- and v-directions. A quantitative measure for the control of surface is suggested by introducing the tangential vectors at the inlet and outlet sections. To verify the validity and effectiveness of the proposed method, automatic surface generation is carried out for extrusion dies of arbitrarily shaped sections.

• 농촌계획
• /
• 제24권2호
• /
• pp.21-29
• /
• 2018

Riparian management has become important as stream water quality as well as riparian ecosystem gain more public attentions. The objective of this study was to determine riparian widths based on the functions of nutrient removal and wildlife habitat protection and to apply for the Jinwee stream area as a preliminary case. Nitrogen and phosphorus filtration efficiencies were considered in water quality aspect, while the habitat radii of amphibian and reptiles were used for wildlife conservation purpose. In addition, observation of endangered species and human impact on wildlife disturbance in riparian area were also taken into account in determining riparian widths. The stream confluence zone was emphasized by doubling the riparian widths as the focal point for wildlife habitat conservation. As the results, three different levels of riparian widths were proposed depending on the major riparian functions and applied to the Jinwee stream section as the case study. The proposed method can be used to determine riparian width in other stream areas based on different functional focus, ie, water quality or riparian conservation purposes.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 추계학술대회 논문집 - 한국공작기계학회
• /
• pp.231-235
• /
• 1999

Cooling characteristics of cooling jacket for spindle system with built-in motor are studied. for the analysis, three dimensional model for the cooling jacket is built by using finite volume method. The three dimensional model includes the estimation on the amount of heat generation of bearing and built-in motor and the thermal characteristic values such as heat transfer coefficients on the boundary. The temperature distributions and the cooling characteristics are analyzed by using the commercial software FLUENT. Numerical results show that stream-wise cross section area and flow rate are important factors for cooling characteristics of cooling jacket. Cooling performance of cooling jacket is good in condition that stream-wise cross section's horizontal length is close to its vertical one and flow rate is high. This results show that heat transfer is dominated by velocity profile and heat transfer area.