• 한국정보과학회논문지:컴퓨팅의 실제 및 레터
• /
• 제8권5호
• /
• pp.540-550
• /
• 2002

전자책(Electronic Book : eBook)은 디지털 매체를 이용해 책의 내용을 저장 및 가공한 출판물을 의미하며 저장의 용이성과 휴대가능성 및 쉬운 검색 둥의 장점이 있다. 이러한 장점을 가진 전자책의 활성화를 위하여 관련 기술의 연구가 필요하며 전자책 구조에 적합한 전자책 전용 편집기 또한 아직 개발이 미비한 실정이다. 본 논문에서는 전자책 장르별 구조를 제공하는 폼 기반(Form-based)의 인터페이스를 제공함으로 사용자가 작성하기 쉬운 전자책 편집기를 설계 및 구현하였다. 특히 전자책은 문헌의 특성상 장르별 구조를 가지고 있기 때문에 각 장르의 구조에 따른 폼의 지원이 필요하다. 따라서 기존의 XML 편집기로 전자책을 작성시 XML 문법에 대한 숙지가 필요한 문제점에 비하여 제안된 시스템은 폼의 인터페이스를 통하여 이를 해결 할 수 있다. 그리고 사용자의 의도에 따른 구조를 갖는 전자책의 특성을 감안하여, 기본적으로 제공되는 폼에 동적으로 구조를 추가할 수 있는 유연성 있는 폼을 지원함으로 전자책을 효과적으로 저작할 수 있다. 그러므로 장르별 폼 기반의 인터페이스와 사용자의 의도에 따른 동적 구조를 제공하여 전자책을 용이하게 저작할 수 있다.

• 건축역사연구
• /
• 제23권6호
• /
• pp.47-54
• /
• 2014

Hwangrong Temple was the center of the Buddhist culture of Silla dynasty. It was built in the 14th year of King Jinheung in Silla dynasty, and completely burnt out when the Mongol Army invaded the Korean peninsula during the reign of King Gojong of Koryeo dynasty. 8-year excavation of the site from 1976 as part of the Gyeongju Tourism Comprehensive Plan revealed many things about the Hwangrongsaji. Recently, a book introduced 'Geumdongnanganpyeon' among relics found in the site, but omitted in the Excavation Report published at that time. Though 'Palgak Geumdongnanganpyeon' has numerical signs 六, 七(six, seven), there was no clear explanation of the signs. Thus, this paper examines it. We can guess, through the remaining iron fragment, that the side of Geumdongnanganpyeon is octagonal, and the width of the side S13 fragment belongs to is about 400mm. The overall form of the face is similar to the Geumdong Palgaktop stored in the Museum of Dongguk University, but, in detail, it is similar to the Zhuanlunzang Pavilion of Longxing Temple and the Sakyamuni Pagoda of Fogong Temple in China. And, numerical signs can be understand to designate the numbers of story and face. The reason why the number might indicate the number of story is that fragments which are presumed to be used for the same purpose contain different measurement values, and the basis of the concept of face can be found in efficiency of manufacturing and manufacturing techniques of artifacts of the time. The two aspects mentioned above cannot be confirmed because of not sufficient relics and related researches. But, the overall form may have been multi-story tower of at least two stories. If more studies in various fields are done in the future, it is expected that the original form will be recovered more accurately.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1778-1781
• /
• 1997

The coke oven plant on a steel works has not, in the past, been regarded as a prime user of modern instrument technology. The reason for this perception may be due to the fact that the basic design of the coke battery has been changed little over the years. The recording and analysis of oven pushing force on a routine basis is seen as a means of monitoring plant operation. A torque sensor is set up at the shaft of the rotor for measuring pushing force. Pushing force data which is communicated form torque sensor to staor by telemetry method are shown on MMI(Man-Machine Interface) screen and stored in the database automatically. Perhaps the most important feature is that is allows a problem oven to be identified at an early stage and for corrective action to be taken before it develops into a refusal to push. In this way the mechanical loads imposed on the battery structlure can be held to a necessary minimum, so helping to prolong its service life.

• 대한전기학회논문지
• /
• 제39권12호
• /
• pp.1306-1316
• /
• 1990

A controller using a multilayer neural network is proposed to the dynamic control of a PUMA 560 robot arm. This controller is developed based on an error back-propagation (BP) neural network. Since the neural network can model an arbitrary nonlinear mapping, it is used as a commanded feedforward torque generator. A Proportional Derivative (PD) feedback controller is used in parallel with the feedforward neural network to train the system. The neural network was trained by the current state of the manipulator as well as the PD feedback error torque. No a priori knowledge on system dynamics is needed and this information is rather implicitly stored in the interconnection weights of the neural network. In another experiment, the neural network was trained with the current, past and future positions only without any use of velocity sensors. Form this thim window of position values, BP network implicitly filters out the velocity and acceleration components for each joint. Computer simulation demonstrates such powerful characteristics of the neurocontroller as adaptation to changing environments, robustness to sensor noise, and continuous performance improvement with self-learning.

• 전기의세계
• /
• 제28권2호
• /
• pp.68-75
• /
• 1979

The penetration of an electro-magnetic wave through an aperture in a cylindrical structure with a center dielectric-rod is investgated. By using a standard mode matching procedure, the electrical and magnetic fields in a cavity are determined as a function of position inside the cavity and frequency of the incident field. For the given parameters, computed data are obtained and the results exhibited in form of amplitude curves of the nor malized field and energy densities of functions of position and frequency. Depending on the increase of the relative dielectric constant of center dielectric-rod, the resonance frequecies of the cavity vary as the cavity size decrease. The stored electro-magnetic energy varies very rapidly as a function of position inside the cavity and of the source frequency. Its peak value can be two orders of magnitude greater than the incident energy density. The frequencies where the peaks occur can be identified approximately as the resonance frequencies of the cavity.

• 대한기계학회논문집
• /
• 제5권2호
• /
• pp.122-130
• /
• 1981

Equation of equilibrium is derived and solved for an infinite isotropic solid under applied hydrostatic stress which is uniform at large distance, and disturbed by a spherical precipitate which has isotropoc elastic constants dirrerent form those of the matrix. A linear strain hardening behavior of the matrix is assumed, and an elasto-plastic sloution is obtained. The difference of the total strain energy stored inthe infinite solid with and without a precipitate is computed, and compared with that for purely elastic case. Finally the effect of the ratio of the bulk modulus of the precipitate to that of the matrix and the effct of linear strain hardening rate on the plastic zone size and the energy difference are discussed.

• 식물조직배양학회지
• /
• 제27권4호
• /
• pp.283-297
• /
• 2000

Seeds are an ideal repository for recombinant proteins in molecular farming applications. However, in order to use plant seeds efficiently for the production of such proteins, it is necessary to understand a number of fundamental biological properties of seeds. This includes a full understanding of promoters which function in a seed-specific manner, the subcellular targeting of the desired polypeptide and the final form in which a protein is stored. Once a biologically active protein has been deposited in a seed, it is also critical that the protein can be extracted and purified efficiently. In this review, these issues are examined critically to provide a number of approaches which may be adopted for production of recombinant proteins in plants. Particular attention is paid to the relationship between subcellular localization and protein extraction and purification. The robustness and flexibility of seed-based production is illustrated by examples close to or already in commercial production.

• 농촌지도와개발
• /
• 제8권2호
• /
• pp.245-261
• /
• 2001

The consulting industry had enjoyed growth rates over the past 20 years which show no signs of slowing in their momentum. Since 1995, it began to discuss institutionalization of consulting in the agricultural sector in Korea. Rural Development Adminstration has launched farm management consulting project by means of benchmarking for farming innovation in 1988, which consists of establishing consulting team, developing standard diagnosis form of sixty crops and materials, training consultants, having various public relations, and making information systems. Until October, 2001, sixty seven thousands of farmers have benefited on this project. It is now appreciated as a alternative for new agricultural extension approach. Analyzing the changes of farm management practice level through consulting shows improvement, which data have been stored in web database. It is expected that farm management consulting project be main stream of agricultural extension in this country.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.898-902
• /
• 1995

STEP is a neutral model for exchanging CAD modelbetween different CAD systms. The paper presents a laser path contour generation for rapid prototyping originated form STEP format files without using any tools nor libraries for STEP data manipulation. Polygons are generated from every point on the layer of given thickness, which are the intersections of layer plane and edges stored in entity tables. Curves are approximated with polygons whitin segment tolerance limit in order to cover sculptured surfaces. With the advantage of less data loss in direct slicing over STL formats, the system developed in this work shows a good potential to provide data share with various CAD systems including RP data preparation.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.383-386
• /
• 2007

This paper describes the design and integration of the wind- fuel cell hybrid system. The hybrid system components included a wind turbine, an electrolyzer (for generation of H2), a PEMFC (Proton Exchange Membrane Fuel Cell), storage system and BOP (Balance of Plant) system. The energy input is entirely provided by a wind turbine. A DC-DC converter controls the power input to the electrolyzer, which produces hydrogen and oxygen form water. The hydrogen used the fuel for the PEMFC. The hydrogen is compressed and stored in high pressure tank by hydrogen gas booster system.