• Korean Journal of Materials Research
• /
• v.26 no.3
• /
• pp.123-129
• /
• 2016

The morphology, crystal structure and size of aerosol nanoparticles generated by erosion of electrodes made of different materials (titanium, copper and aluminum) in a multi-spark discharge generator were investigated. The aerosol nanoparticle synthesis was carried out in air atmosphere at a capacitor stored energy of 6 J, a repetition rate of discharge of 0.5 Hz and a gas flow velocity of 5.4 m/s. The aerosol nanoparticles were generated in the form of oxides and had various morphologies: agglomerates of primary particles of $TiO_2$ and $Al_2O_3$ or aggregates of primary particles of $Cu_2O$. The average size of the primary nanoparticles ranged between 6.3 and 7.4 nm for the three substances studied. The average size of the agglomerates and aggregates varied in a wide interval from 24.6 nm for $Cu_2O$ to 46.1 nm for $Al_2O_3$.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.2C
• /
• pp.31-40
• /
• 2005

we propose an enhanced self-generation supervised algorithm that by combining an ART algorithm and the delta-bar-delta method. Form the input layer to the hidden layer, ART-1 and ART-2 are used to produce nodes, respectively. A winner-take-all method is adopted to the connection weight adaption so that a stored pattern for some pattern is updated. we test the recognition of student identification, a certificate of residence, and an identifier from container that require nodes of hidden layers in neural network. In simulation results, the proposed self-generation supervised learning algorithm reduces the possibility of local minima and improves learning speed and paralysis than conventional neural networks.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.5
• /
• pp.2074-2079
• /
• 2018

Global state space's optimal policy is used for offline controller in the form of table by using Dynamic Programming. If an optimal policy table has a large amount of control data, it is difficult to use the system in a low capacity system. To resolve these problem, controller using the compressed optimal policy table is proposed in this paper. A DCT is used for compression method and the cosine function is used as a basis. The size of cosine function decreased as the frequency increased. In other words, an essential information which is used for restoration is concentrated in the low frequency band and a value of small size that belong to a high frequency band could be discarded by quantization because high frequency's information doesn't have a big effect on restoration. Therefore, memory could be largely reduced by removing the information. The compressed output is stored in memory of embedded system in offline and optimal control input which correspond to state of plant is computed by interpolation with Inverse DCT in online. To verify the performance of the proposed controller, computer simulation was accomplished with a one link inverted pendulum.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.24 no.3
• /
• pp.571-580
• /
• 2014

Digital Records, which are created, stored, and managed in digital form, contains security vulnerability such as data modification, due to the characteristic of digital data. Therefore it is necessary to guarantee the reliability by verification of integrity and authenticity when managing digital records. This paper propose digital forensics based migration process for electronic records by analyzing legacy digital forensics process, and derives the requirements to develop digital forensics based electronic records migration tool through analyzing trends of abroad digital records migration technique and tool. Based on these develop digital forensic based digital records migration tool to guarantee integrity and authenticity of digital records.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.28 no.4
• /
• pp.839-845
• /
• 2018

Sensitive data is encrypted and stored as privacy policy is strengthened through frequent leakage of personal information. For this reason, the cryptographically owned encrypted data is a very important analysis from the viewpoint of digital forensics. Until now, the digital evidence collection procedure only considers imaging, so hardware specific information is not collected. If the encryption key is generated by information that is not left in the disk image, the encrypted data can not be decrypted. Recently, an application for performing encryption using hardware specific information has appeared. Therefore, in this paper, hardware specific information which does not remain in file form in auxiliary storage device is studied, and hardware specific information collection method is introduced.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.48 no.9
• /
• pp.467-475
• /
• 1999

This paper presents an analysis method of a forward converter, using both the finite element method considering the external circuit and a state variables equation. The converter operates at 50kHz and its one period is divided into two modes for the simplicity of the analysis. In the first mode, the switching transistor turns on and an input power is transferred into the load by the electromagnetic conversion action of a ferrite transformer. In the second mode, the switching transistor turns off and the stored energy in an inductor is delivered to the load, and the transformer core is demagnetized by the reset winding current. In this paper, time-stepping finite element method taking into account the on-state electrical circuit of the converter in used to analyze both the electrical circuit and electromagnetic field of the magnetic device during the first mode and the demagnetization period of the transformer core. Then a state variables equation for the circuit which the inductor current flows is constituted and solved during the second mode. As a result, the simulation results have been good agreement with the results obtained form experiment.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.54 no.12
• /
• pp.622-628
• /
• 2005

This paper is given a full detail of mathematical analyses of input current and output voltage for a novel active type power factor correction (PFC) converter. These are compared with harmonics components of input current for a conventional PFC converter. The proposed PFC converter is constructed in using a new loss-less snubber circuit to achieve a soft switching of control device. Also the proposed converter for discontinuous conduction mode (DCM) eliminates the complicated circuit control requirement and reduces the size of components. The input current waveform in the proposed converter is got to be a sinusoidal form of discontinuous pulse in proportion to magnitude of ac input voltage under the constant duty cycle switching. Therefore, input power factor is nearly unity and the control method is simple. Particularly, the stored energy of loss-less snubber capacitor is recovered with input side and increases input current from resonant operation. The result is that input power factor of the proposed converter is higher than that of conventional PFC converter. Some simulative results on computer and experimental results are included to confirm the validity of the analytical results.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.8
• /
• pp.2060-2069
• /
• 1997

Information processing using computer in generalized in the office automation. In spite of to be integrate and concise form of document through computer network, signature of document with hand have processed as ever. The security on document flow out severely unjust by reason of increment inverse function of computer. Because of revelation secret of enterprise result from unjust outflow, lots of loss of self-enterprise is occured. In this paper, we used efficiently document using the method, electronic approval system with encryption, for the resolving above problems. Also we persue maintenance of security for the important document and process document signature rapidly. Finally, we design and implementation of electronic approval system that take one's share of function between server and client using to be transformed Vernam's encryption technique in stored document.

• The KIPS Transactions:PartB
• /
• v.9B no.5
• /
• pp.701-706
• /
• 2002

A set of color features has been efficiently used to measure the similarity of given images. However, the size of the color features is too large to implement an indexing scheme effectively. In this paper a new method is proposed to retrieve similar images using an interpolated color histogram. The idea is similar to the already reported methods that use the distributions of color histograms. The new method is different in that simplified color histograms decide the similarity between a query image and target images. In order to represent the distribution of the color histograms, the best order of interpolated polynomial has been simulated. After a histogram distribution is represented in a polynomial form, only a few number of polynomial coefficients are indexed and stored in a database as a color descriptor. The new method has been applied to real images and achieved satisfactory results.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07a
• /
• pp.86-89
• /
• 2004

To estimate a electrical performance of the extra high voltage XLPE cable the discharge properties due to shift of void position were investigated. The ${\phi}-q-n$ properties have been measured at room temperature by rising voltage ratio of 0.5[kV]. An obtained data was stored to personal computer through A/D converter. The period of applied wave form and discharge values were divided into 64 parts and discharge values generated during 10 seconds were accumulated by phases. As a result, it was confirmed that the charge, phase angle and counts of discharge changed due to void position.