• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.532-534
• /
• 2004

The advancement of electronics and telecommunication technologies has forced the risk management system for underground metallic structures to evolve into the remote monitoring and control system. Especially, facilities such as gas pipelines, oil pipelines and water distribution lines might make hazardous effect on human safety without continuous monitoring and control. As a result, pipeline engineers have applied cathodic protection system to prevent the degradation of their facilities by corrosion and carried out a periodic monitoring of the pipe-to-soil (P/S) potentials at numberous test boxes along their pipelines. The latter action on a road in downtowns, however, is so much dangerous that the inspectors should be ready to suffer the threatening of their lives and maintenance. In order to minimize these social costs and hazards, a stand-alone type corrosion monitoring equipment which can be installed in test box, store the P/S data for given Belied and send the data by wired/wireless telecommunications is under development. In order to obtain the exact P/S data, however, a reference electrode should be located as close to the pipeline as possible. Actually, the measured potential by a conventional portable reference electrode contain inevitably an IR drop portion caused by the current flow from the cathodic protection rectifier or the subway railroad. To minimize this error, it is recommended that the reference electrode should be buried within 10 cm from the pipeline. In this paper, we describe the design parameters for fabricating the permanent type reference electrode and the characteristics of the developed reference electrode.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.8
• /
• pp.1097-1103
• /
• 2012

There are many fish farms being cultivated in the southwestern cost of South Korea. Because the farms cultivating use the basic method that inflow and circulate sea-water, slight negligence and bad design cause major negative impact on fish deaths. Also, the optimal temperature for each specie of fishes has already been proven to differ on each specie. Maintaining this environment, regardless of seasons, is very difficult and that requires research to develop. In this paper, basic characteristics of heat and mechanism of heat transfer are studied. Based on this, Open-end water vessel is designed and constructed using sandwich-insulation panels and simulated to store the heat in certain isolated space. This study confirmed that it is possible to keep constant temperature by this method, in large areas of water where it is insulated by heat insulator. and equipped with heater in Open-end water vessel where the other part is heated. The AC power controller maintains the constant temperature required and the temperature controller detects and displays the temperature by using the micro-processor.

• Progress in Medical Physics
• /
• v.14 no.1
• /
• pp.43-50
• /
• 2003

PACS mostly has been used in large scaled hospital due to expensive initial cost to set up the system. The network of PACS is independent of the others: network. The user's PC has to be connected physically to the network of PACS as well as the image viewer has to be installed. The web based mini-PACS can store, manage and search inexpensively a large quantity of radiologic image acquired in a hospital. The certificated user can search and diagnose the radiologic image using web browser anywhere Internet connected. The implemented Image viewer is a viewer to diagnose the radiologic image. Which support the DICOM standard and was implemented to use JAVA programming technology. The JAVA program language is cross-platform which makes easier upgrade the system than others. The image filter was added to the viewer so as to diagnose the radiologic image in detail. In order to access to the database, the user activates his web browser to specify the URL of the web based PACS. Thus, The invoked PERL script generates an HTML file, which displays a query form with two fields: Patient name and Patient ID. The user fills out the form and submits his request via the PERL script that enters the search into the relational database to determine the patient who is corresponding to the input criteria. The user selects a patient and obtains a display list of the patient's personal study and images.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.12
• /
• pp.4984-4990
• /
• 2010

In this paper, a Step-down CMOS DC-DC Converter using low power switched capacitor method is designed in a 0.5 ${\mu}m$ technology for the integration of devices. Conventional DC-DC converter is used inductor that can store energy in a magnetic field but have low efficiency because power consumption is caused by magnetic flux. And there were problems with size, weight and price to integrate chip. In this paper, a proposed Inductorless step-down CMOS DC-DC converter of low power using SC method is designed in a 0.5um technology to solve these problems. Designed DC-DC converter have 96% power efficiency with 200kHz frequency by using cadence simulation.

• The Transactions of the Korea Information Processing Society
• /
• v.3 no.4
• /
• pp.992-1001
• /
• 1996

Radix sort scans the data twice in a pass, to search bit 0s of the items being sorted and store them into the lowest address, and to search bit 1s and st ore them into the following addresses. This doubles the sorting time. In this paper, we introduce Reverse Radix Sort Algorithm, in which the data being sorted are sacnned just once and write upward from the lowest address if it is 0 and downward from the highest address if it is 1. The algorithm is simple and the hardware sorter implemented by this method shows very high sorting sped. Hardware implementation requires two separate pocket memories, register, an upward increasing address counter, a downward decreasing address counter, and comparator. The software simulation of Reverse Radix Sor Algorithm performs sorting in the speed of 54.9ms per 10 thousand of 8 bit digit data, but the hardware sorter spends 5.3ms to sort the same number of data.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.1
• /
• pp.53-60
• /
• 2010

This paper presents a novel gain control system composed of a feedback circuit, Two stage Low Noise Amplifier (LNA) using 0.18 um CMOS technology for 5.2 GHz. The feedback circuit consists of the seven function blocks: peak detector, comparator, ADC, IVE(Initial Voltage Elimination) circuit, switch, storage, and current controller. We focus on detecting signal and designing storage circuit that store the previous state. The power consumption of the feedback circuit in the system can be reduced without sacrificing the gain by inserting the storage circuit. The adaptive front-end system with the feedback circuit exhibits 11.39~22.74 dB gain, and has excellent noise performance at high gain mode. Variable gain LNA consumes 5.68~6.75 mW from a 1.8 V supply voltage.

• Journal of the Korea Computer Industry Society
• /
• v.2 no.12
• /
• pp.1573-1580
• /
• 2001

Due to development of technology of information technology, PC communication and Internet have become a culture space of teenagers. Because Internet and PC communication are media in which teenagers have interests, they could be effectively used to counsel teenagers in that time they want. Moreover, cyber counseling will be suitable to new trend of current age with extension of counseling area. Accordingly, many researches on cyber counseling have proceeded in the area of teenagers counseling. While most researches for cyber counseling until present are about counseling methods ad the effects that teenagers utilize cyber counseling, there were no efforts that store counseling contents, analyze them using features and technologies of web and use them effectively to guide students. Therefore, we implemented a cyber counseling system that provides counseling information so that teacher may grasp students various interests and problems and thus helps to guide students.

• Korean Journal of Human Ecology
• /
• v.10 no.1
• /
• pp.113-126
• /
• 2001

The purpose of this study was to investigate clothing behavior and ornaments wear of university students. The subject of this study consists of 241 college students who were attended in Kongju National University. SPSSWIN Program was utilized to calculated frequency(N), mean value(M) and standard deviation(SD) for statistical analysis. Differences among the populations were examined through T-test, F-test, $x^2$-test. The results of this study were as follow : 1. Clothing behavior of university students had significant difference according to sex, grade. In general, female students showed higher score than did male students in clothing interest, clothing conformity, self-estimation about clothing, clothing dependence, clothing aesthetic, clothing modesty, A first-year students had high tendency in clothing interest. 2. The wear of ornaments had significant difference according to variables. Buying the ornaments, most of students sot information in show window and emphasized on design. Male students wanted to have the ornaments of shoes, watch, hat & necklet, but female students wanted to have the ornaments of shoes, earring, necklet & hairpin. 3. Clothing behavior has Influenced university students' ornaments wear. The university students who appeared to be interested in clothes were apparently influenced by peers when selecting ornaments. Ornaments were usually bought in the department store, while belts were among the most popular choices. Students who stressed color when purchasing ornaments showed a high level of interest in and dependence on clothes. On the basic of these results, we can conclude that university students' taste in clothing behavior and use of ornaments wear depend on several different factors. Therefore, it is possible to outline the shift in clothing attitudes during adolescence. In order to understand university students' behaviour concerning clothes, much guidance and various studies on the subject are much recommended.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.25 no.4
• /
• pp.781-792
• /
• 2015

This paper proposes a virtual and invisible private disk (VIPDISK) technology equipped with the secure storage devices. As a software based security technology, it can create hidden partitions on any data storage device which can not be identified by the windows OS, so the program running on it, does not have any evidence of the existence of the hidden storage space. Under inactive state, it maintains an unexposed secure partition which can only be activated with a matching combination of a unique digital key and a user password to open the decryption tool. In addition, VIPDISK can store data to secure storage device with real-time encryption, it is worry-free even in the case of lost or theft. Simulation results show that VIPDISK provides a much higher level of security compared to other existing schemes.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.4
• /
• pp.612-622
• /
• 2003

This paper studied and proposed a XML document storing-and-retrieval framework based on a variant k-ary complete tree and a RDF metadata, which is composed of an effective storing module to store xml documents, a retrieving module to retrieve xml documents, and a connecting module to make this system intemperate in the web environment. In this storing module, DTD independent DOM based decomposition model using a method of addressing unique ill using a variant k-ary complete tree is adopted and is implemented. Query Processing Module includes a XPath query process and a content based retrieval function using word index for content information. To retrieve more exactly data, a structural retrieval using RDF metadata is adopted and implemented. In order to implement effectively XML document storing and retrieval system in the web environment, API using XML-RPC, API using HTTP's GET, PUT, POST and API using SOAP have been adopted and implemented.