• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2012년도 제38회 춘계학술대회논문집
• /
• pp.259-261
• /
• 2012

본 연구에서는 3점 굽힘시험 및 DMA 시험을 통해 온도환경이 에폭시 수지의 굽힘탄성계수에 미치는 영향을 조사하였다. 굽힘 시험의 온도 조건은 $30^{\circ}C$, $100^{\circ}C$, $140^{\circ}C$의 세 가지 조건을 적용하였으며 시편은 종횡비 16, 32, 40배의 세 가지 종류가 고려되었다. 연구결과에 따르면 DMA를 통한 저장탄성계수와 굽힘시험을 통해 얻은 강성은 주어진 온도조건에서 서로 유사한 경향을 보였다. 또한 종횡비가 증가함에 따라 굽힘탄성계수도 증가 하였으며, 고온환경에서는 32배 이상의 종횡비가 적합하다고 판단된다.

• Journal of Pharmaceutical Investigation
• /
• 제36권1호
• /
• pp.31-38
• /
• 2006

Using a Rheometries Dynamic Analyzer (RDA II), the dynamic viscoelastic properties of a semi-solid ointment base (vaseline) in large amplitude oscillatory shear flow fields were measured over a temperature range of $25{\sim}45^{\circ}C$ and the linear viscoelastic behavior in small amplitude oscillatory shear flow fields was investigated over a wide range of angular frequencies. In this article, the nonlinear viscoelastic behavior was reported from the experimentally obtained data and the effect of temperature on this behavior was discussed in detail. In addition, the angular frequency and temperature dependencies of a linear viscoelastic behavior were explained. Finally, the applicability of a time-temperature superposition principle originally developed for polymeric materials was examined using a shift factor. Main results obtained from this study can be summarized as follows : (1) At very small strain amplitude region, vaseline shows a linear viscoelastic behavior independent of the imposed deformation magnitudes. Above a critical strain amplitude $({\gamma}_{0}=0.1{\sim}0.2%)$, however, vaseline exhibits a nonlinear viscoelastic behavior ; indicating that both the storage modulus and dynamic viscosity are sharply decreased with increasing deformation magnitude. (2) In large amplitude oscillatory shear flow fields, an elastic behavior (storage modulus) has a stronger strain amplitude dependence and begins to show a nonlinear behavior at a smaller strain amplitude region than does a viscous behavior (dynamic viscosity). (3) In small amplitude oscillatory shear flow fields, the storage modulus as well as the loss modulus are continuously increased as an increase in angular frequency and an elastic nature is always superior to a viscous behavior over a wide range of angular frequencies. (4) A time-temperature superposition principle can successfully be applicable to vaseline. This finding allows us to estimate the dynamic viscoelastic behavior of vaseline over an extraordinarily extended range (11 decades) of angular frequencies inaccessible from the experimentally measured range (4 decades).

• 한국세라믹학회지
• /
• 제35권7호
• /
• pp.726-732
• /
• 1998

• 비파괴검사학회지
• /
• 제28권3호
• /
• pp.279-284
• /
• 2008

The firmness of fruit is one of the most important quality factors and is highly correlated to the elastic modulus. In this study, the ultrasonic transmission method was applied to evaluate the elastic modulus of the apple. In order to transmit and receive the ultrasonic wave through the whole apple, the ultrasonic measurement setup consisted of ultrasonic pulser, two specially fabricated ultrasonic transducers for fruit and digital storage oscilloscope. Ultrasonic parameters such as ultrasonic wave velocity, apparent attenuation, and peak frequencies were analyzed. The elastic modulus of apple was measured by using compression test apparatus. The correlations between ultrasonic parameters and elastic modulus were analyzed. A multiple linear regression model describing the relationship between elastic modulus and ultrasonic parameters was proposed.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.213-214
• /
• 2005

To measure modulus and damping of semiconductive materials in power cable, we have investigated the modulus and damping of semiconductive materials showed by changing the content of carbon black. Then they were produced as sheets after pressing for 20 minutes at 180[$^{\circ}C$] with a pressure of 200[$kg/cm^2$]. The content of conduct ive carbon black was the vailable, and their contents were 20, 30 and 40[wt%], respectively. The modulus and $Tan\delta$ experiments were measured by DMA 2980. Ranges of measurement temperature from -50[$^{\circ}C$] to 100[$^{\circ}C$] and measurement frequency is 1[Hz]. The modulus of specimens was increased according to a increment of a carbon black content. And modulus was rapidly decreased at the glass transition temperature. The $Tan\delta$ of specimens was decreased according to a increment of a carbon black content.

• Advanced Composite Materials
• /
• 제16권4호
• /
• pp.259-267
• /
• 2007

Mechanical reinforcement of an all-sustainable composite, composed of papyrus stem-milled particles as reinforcement and poly-L-lactic acid (PLLA) resin as matrix, was investigated. The papyrus particles (average diameter of $70{\mu}m$) could be well dispersed in PLLA resin up to 50 wt% without any surface modification. Young's modulus of the composite was 4.2 GPa at 50 wt% of the papyrus content. This is a two-fold increment in modulus as compared to that of the PLLA matrix. The tensile strength of the composite was almost constant around 48 MPa irrespective of the papyrus content. Temperature dependence of the storage modulus demonstrated that the incorporation of papyrus restricts the large drop in the modulus above the glass transition of PLLA.

• Food Science and Biotechnology
• /
• 제17권5호
• /
• pp.1119-1121
• /
• 2008

The effects of storage time (0, 1, and 2 month) and temperature (5, 15, and $25^{\circ}C$) on the dynamic rheological properties of hot pepper-soybean paste (HPSP) mixed with acetylated starches (AS) were studied by small-deformation oscillatory measurements. Dynamic moduli (G', G", and $\eta^*$) values of HPSP-AS mixtures increased with an increase in storage time and also decreased with increasing storage temperature. However, dynamic moduli values of the control (no added AS) were independent on storage time and temperature. Tan $\delta$ values (ratio of G"/G') in all HPSP samples did not change much with an increase in storage time and temperature. After 2 months of storage, the dynamic moduli of the HPSP-AS mixture samples were much lower than those of the control, indicating that the addition of AS can inhibit the retrogradation that developed over a long period of storage. Structural and rheological properties of HPSP samples seem to be stabilized by the presence of AS.

• 접착 및 계면
• /
• 제3권4호
• /
• pp.1-9
• /
• 2002

본 연구의 목적은 목분과 폴리프로필렌으로 제조한 목질-고분자 복합재료의 점탄성적 성질에 미치는 결합제, 기핵제의 영향에 대해 고찰하는데 있으며, 목분과 결합제간의 esterification 반응이 목질-고분자 복합재의 기계적 성질에 미치는 영향 또는 고찰하고자 한다. 복합재는 목분 60%와 폴리프로필렌 40%를 혼합하여 제조하였으며, DMTA (Dynamic mechanical thermal analysis)를 사용하여 damping peaks (than ${\delta}$), storage modulus (E'), loss modulus (E")를 측정하였다. 또한 XPS (X-ray Photolectron Spectroscopy)를 사용하여 목분에 MAPP를 처리하기 전과 후의 상태를 고찰하였다. DMA 시험은 온도범위 $-20{\sim}100^{\circ}C$에서 여러가지 주파수 (1, 5, 10, 25 HZ) 조건과, 승온속도 $5^{\circ}C/min$으로 실시하였다. 이 시험결과를 토대로 복합재의 활성화에너지를 구하여 결합제와 기핵제가 목분과 고분자물질간 계면의 성질에 미치는 영향을 고찰하였다.

• Fibers and Polymers
• /
• 제2권3호
• /
• pp.141-147
• /
• 2001

The effect of compositions of isophorone diisocyanate (IPDl)/4.4'-diphenylmethane diisocyalate (MDI) and polypropylene oxide diol (PPG, $M_w$: 3000)/1,4-butane diol (BD) on the properties of UV-cured polyurethane acrylate films based on 2-hydroxyethyl acrylate (HEA) was examined. UV-curable polyurethane acrylates were formulated from the prepolymer. trimethylol propane triacrylate (TMPTA) as a reactive diluent, and 1-hydroxycyclohexyl ketone (Irgacure 184) as a photoinitiator. Dynamic mechanical thermal properties and elastic properties of UV-cured polyurethane acrylates was fecund to depend on the chemical composition of IPDl/MDl and PPG/BD. As the BD content increased, the tensile storage modulus of all series samples increased significantly. The storage modulus increased in the order of samples A (IPDI based samples)> samples B (IPDI/MDl (7/3 molar ratio) based samples) > samples C (IPDI/MDl (5/5 molar ratio) based samples at the same composition. Two distinct louts modulus peaks for all samples are observed owing to the softs segment glass transition temperature ($T_gh$) and hard segment glass transition temperature ($T_gh$). The difference between $T_gh$, and $T_gh$, (Δ$T_g$) increases in the order of A > B > C at the same composition. In cycle test, the initial onset strain (%) was found to decrease with increasing BD content in PPG/BD and with increasing MDI content in IPDI/MDl.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.210-215
• /
• 2002

MR(Magnetorheogical) fluid composed of fine iron powders dispersed in silicon oil is utilized to many smart structures and devices because of its significant rheological property change by the application of an external magnetic field. When we deal with the shock wave attenuation of warship structures, we should be able to characterize the high frequency behavior of MR fluids. So far, however, many efforts have been focused on the material characterization of MR fluids at low frequencies below 100Hz. In this paper, the MR fluid property characterization at high frequency region is performed. An experimental setup based on wave transmission technique is made and the storage modulus as well as the loss modulus of MR fluids are found from the measured data of speed sound and attenuation. Details of the experiment are addressed and the obtained storage and loss moduli are addressed at $50kHz{\sim}100kHz$.