• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1993.10a
• /
• pp.922-931
• /
• 1993

Boundary element method was used to solve heat conduction problem for predicting temperature distribution in grain storage bin. Temperature of grain in storage is one of the three main abiotic factors, besides the intergranular gas composition and the grain moisture content, that determine the keeping quality and control measures used to protect grain from insects and damaging microflora. Collecting the temperature data at various points in the storage bins at different time of the day over a period of time is one way of finding the temperature distribution, this method requires a lot of time, cost and labour and less efficient. However data so collected serve useful purpose of being used to validate predicted temperature distribution using mathematical models. Mathematical models based on physical principles can potentially predict with accuracy the temperature distribution in a grain storage bin. Using the boundary element model the effect of bin wall material, ambient emperature, bin size etc. on temperature distribution can be studied. A knowledge of temperature distribution in stored grain not only helps in identifying active deterioration , but also gives an indication of potential for detection.

• 정보저장시스템학회:학술대회논문집
• /
• 2005.10a
• /
• pp.139-144
• /
• 2005

Because of the photorefractive recording dynamics, each newly recorded hologram partially erases all previously stored image. Thus achieving the desired diffraction efficiency profile for the entire sequence after all images have been recorded requires exposure time schedule. The often cited classical exposure-schedule model predicts a rising-exponential build-up and an exponential decay in An with an exposure time. However because we cannot directly measure the An, it's difficult to establish the relation of both. In this paper, we deduce the relation of diffraction efficiency and exposure time from experiment data and suggest an algorithm to make time schedule profile in angle/fractal multiplexing of holographic data storage. After that, we present simulated result with equal hologram diffraction efficiency for a sequence of 250 holograms recorded by angle/fractal multiplexing.

• Journal of the Korean Society of Food Culture
• /
• v.27 no.2
• /
• pp.211-224
• /
• 2012

Eggplant pickles were classified into three groups based on salt concentration (1, 3, 5%) and three groups based on drying time (30, 60 and 120 minutes), followed by storage at $5^{\circ}C$ for 28 days. Raw eggplant contains 94.82% water content. The increase in salt concentration and drying time caused a decrease in the moisture content. Compared to the 0.27% ash content of raw eggplant, the ash content of eggplant pickles increased noticeably with increasing salt concentration due to penetration into the eggplant pickles. pH values decreased significantly as the levels of salt concentration and dying time increased (p<0.05). In terms of storage time, pH values decreased from 21 days. The variation in salinity increased significantly as the concentration of salt increased. Compared to normal pickles salted at 5.39% salinity, eggplant pickles constituted 0.27~0.77% (1%), 0.40~1.14% (3%), and 0.47~11.20% (5%) 'low-salinity' eggplant pickles. Reducing-sugar content differed on the dates of 7, 14 and 21 in drying time and at 3% salinity. Hardness differed at 30, 60, and 120M on the 28th and 1, 5% salt concentration. Resilience differed according to drying time and from dates of 0 to 14th. The number of total microbes decreased at low salinity. In terms of storage time, the number of microbes tended to decrease after the 21st. In the consumer preference test, lightness of 5%-30M was the highest value.

• Korean Journal of Veterinary Service
• /
• v.40 no.1
• /
• pp.35-40
• /
• 2017

In order to find a way to reduce histamine formation when storing salted mackerel at home, a series of experiments were carried to monitor the time-related changes of histamine content, total aerobic bacteria and coliform quality of mackerel marketed in Incheon by the type of storage containers (clean, zipper and vacuum bag) during storage at $4^{\circ}C$, $24^{\circ}C$ and $-20^{\circ}C$ for 10 days. Histamine formation was continuously increased with passing time during storage at $4^{\circ}C$, whereas it was decreased after 3 days during storage at $24^{\circ}C$. The initial value of histamine was maintained during storage at $-20^{\circ}C$ for 10 days. During storage at $4^{\circ}C$, total aerobic bacteria and coliform showed a tendency to increased rapidly till 3day and then decreased gradually. The formation of histamine was increased in the order of vacuum bag$4^{\circ}C$.

• Journal of dental hygiene science
• /
• v.10 no.6
• /
• pp.459-464
• /
• 2010

The purpose of this study was to evaluate the physical properties of hydrophilic polyvinyl siloxane impression materials as change of material's storage temperatures. Working time, strain-in-compression, elastic recovery and consistency were tested according to ISO Standard NO. 1563. The results are as followed. 1. Working time decreased in cold storage. 2. Strain-in-compression was different in storage temperatures. Material's strain-in compression in cold temperatures were higher than in room temperature and in incubator. 3. A coefficient of elastic recovery varied by storage temperatures. The rate in cold temperature was the lowest and in incubator was the highest. 4. Consistency of impression substance different in storage temperatures. The extent in cold temperature is the highest and in incubator was the lowest. Statistical analysis(SPSS 14.0k, p>0.05) showed that storage temperature affect to material's physical properties. We recognized that the physical properties of polyvinyl siloxane impression materials were changed according to storage temperature.

• Journal of Environmental Science International
• /
• v.32 no.4
• /
• pp.233-242
• /
• 2023

The objective of this study was to develop a management strategy for the recovery of carbon storage capacity of abandoned coal mine forest rehabilitation area. For the purpose, the biomass and stand carbon storage over time after the forest rehabilitation by tree type for Betula platyphylla, Pinus densiflora, and Alnus hirsuta trees which are major tree species widely planted for the forest rehabilitation in the abandoned coal mine were calculated, and compared them with general forest. The carbon storage in abandoned coal mine forest rehabilitation areas was lower than that in general forests, and based on tree species, Pinus densiflora stored 48.9%, Alnus hirsuta 41.1%, and Betula platyphylla 27.0%. This low carbon storage is thought to be caused by poor growth because soil chemical properties, such as low TOC and total nitrogen content, in the soil of abandoned coal mine forest rehabilitation areas, were adverse to vegetation growth compared to those in general forests. DBH, stand biomass, and stand carbon storage tended to increase after forest rehabilitation over time, whereas stand density decreased. Stand' biomass and carbon storage increased as DBH and stand density increased, but there was a negative correlation between stand density and DBH. Therefore, after forest rehabilitation, growth status should be monitored, an appropriate growth space for trees should be maintained by thinning and pruning, and the soil chemical properties such as fertilization must be managed. It is expected that the carbon storage capacity the forest rehabilitation area could be restored to a level similar to that of general forests.

• Journal of Korea Water Resources Association
• /
• v.42 no.3
• /
• pp.235-246
• /
• 2009

This study theoretically reviews the basin storage coefficient and concentration time using the Nash model, a simple unit hydrograph theory. First, the storage coefficient and concentration time of Nash instantaneous unit hydrograph (IUH) are derived based on their definitions, whose characteristics as well as their relationship are also reviewed. Additionally, several empirical equations of storage coefficient and concentration time commonly used in Korea are evaluated by comparing them with those for the Nash IUH. Major results of this study are summarized as follows. (1) The concentration time of Nash IUH is approximately linearly proportional to the number of linear reservoirs, but the storage coefficient non-linearly to the square root. That is, if increasing the number of linear reservoirs by four times, the concentration time becomes also increased by about four times, but the storage coefficient only about two times. This result has a special meaning to understand the effect of basin subdivision on the concentration time and storage coefficient. (2) The storage coefficient and concentration time of Nash IUH are not independent each other, so their independent estimation does not make any physical sense. As the concentration time among the two is more sensitive to the number of linear reservoirs, which should be estimated first, then the storage coefficient considering the concentration time estimated. (3) Empirical equations of concentration time can be divided into two groups, one following the linear channel theory and the other not, whose equation forms are also found to be very similar. This result indicates that the characteristic factors dominating the concentration time are very similar, indicating the possibility of its regionalization over a basin with consistent equation forms. (4) Those for storage coefficient like the Russell formulae are found to consider the physical characteristics of a basin, so their unreasonable applications could sufficiently be excluded.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.472_473
• /
• 2009

It is fascinated research theme to store electric energy as much as possible and to utilize it at the point of proper time. Especially, the demand for energy storage devices has been increased based on the interest for distributed generation and smartgrid. As the results for a number of researches on it, various types of energy storage devices have been developed. Each devices have its own dynamic characteristics, power capacity, and storage capacity followed by storage mechanism. In this paper, the comparison research for various energy storage devices has been performed based on power capacity, storage capacity, discharging time, lifetime, efficiency, and cost. Application researches of SFES(superconducting flywheel energy storage), characterized as 300kW-100kWh, have been performed also.

• The Korean Journal of Food And Nutrition
• /
• v.13 no.1
• /
• pp.21-27
• /
• 2000

In order to investigate the changes of rice qualities during 4 years storage of paddy in warehouse of normal temperature condition. As storage period go by, head ratio was deduced and broken rice was increased according as a change of temperature during the long term storage. A color of rice was became more dark gray than that of entering time as L value was decreased from 64.07 to 61.62 a 4 years late. As a results of studies on the cooking quality of milled rice, water uptake ratio and expanded volume were increased in proporation to storage period, wherease total solids and iodine blue value were decreased. In the characteristic of texture of cooked rice, viscosity/hardness ratio(-H/H) had a decreasing tendency, while adhesiveness and cohesiveness increased with increased storage time. The qualities of cooked milled rice studied were sensory attributies of odor, taste, stickiness and appearance which were evaluvated by multiple comparsion method. The sensory results showed that all of descriptions were deterirated with a increased storage period. The taste and stickiness were changed from good score to bad score a 2 years later.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.261-267
• /
• 2006

The required storage inventory is a very important decision variable which determines the storage capacity of a container terminal. Generally, the required storage inventory is dependent upon such factors as ship headway, allowable dwell time of containers, loading/unloading time per ship, and so on. Until now, the required storage inventory is estimated under the assumption that the factors are deterministic in several studies. However, this study proposes how to estimate a required storage inventory satisfying the required service level under the assumption that a containership's load size is probabilistic. Numerical experiments, which use a simulation show that the proposed method can estimate more adequately the maximum storage inventory than other methods under a probabilistic environment.