• Korean Journal of Food Science and Technology
• /
• v.41 no.5
• /
• pp.578-586
• /
• 2009

This study was conducted to determine the effects of alkaline electrolyzed water (AIEW), acidic electrolyzed water (AcEW), 1% citric acid, and 100 ppm sodium hypochlorite, either alone or in combination with citric acid, in reducing the populations of spoilage bacteria and foodborne pathogens (Listeria monocytogenes and Escherichia coli O157:H7) on lettuce at various exposure times (3, 5, and 10 min) with different dipping temperatures (1, 20, 40, and $50^{\circ}C$). In addition, the inhibitory effect of alkaline electrolyzed water combined with citric acid on the browning reaction during storage at $4^{\circ}C$ for 15 days was investigated. Compared to the untreated control, electrolyzed water more effectively reduced the number of total bacteria, mold, and yeast than 100 ppm sodium hypochlorite under the same treatment conditions. All treatments exposed for 5 min significantly reduced the numbers of total bacteria, yeast, and mold on head lettuce. The inactivation effect of each treatment on head lettuce was enhanced as the dipping temperature increased from 1 to $50^{\circ}C$, but there was no significantly difference at temperatures greater than $40^{\circ}C$ (p<0.05). The total counts of yeast and mold in head lettuce were completely eliminated when a combination of 1% citric acid and AlEW treatment was used at temperatures greater than $40^{\circ}C$. However, decreased reduction in L. monocytogenes (2.81 log CFU/g), and E. coli O157:H7 (2.93 log CFU/g) on head lettuce was observed under these treatment conditions. In addition, enhanced anti-browning effect was observed when the samples were subjected to both 1% citric acid and AlEW treatment at temperatures greater than $40^{\circ}C$ compared to when single treatments alone were used. Thus, this combined treatment might be considered a potentially beneficial sanitizing method for improving the quality and safety of head lettuce.

• Applied Biological Chemistry
• /
• v.13 no.3
• /
• pp.207-218
• /
• 1970

Studies were carried out to develope the most economical and practical methods of packaging and preservation of kimchi, so commercialization of kimchi manufacture could proceed rapidly. The results obtained may be summarized as following. (1) It is generally established that the acceptable range of lactic acid content of kimchi is between 0.4% and 0.75%. Based on sensory evaluation, kimchi having lactic acid content below 0.4% and above 0.75% was not edible, and the time of optimum taste corresponded to the vicinity of 0.5% of lactic acid content. For the refrigeration storage with or without preservatives, the packaging kimchi in plastic film must be done at the lactic acid content of 0.45%, for lactic acid fermentation will continue slowly after the packaging. However, for the heat sterilized kimchi the packaging should be done at the 0.5% of lactic acid content for the best because lactic acid fermentation is completely stopped after the packaging. (2) Polyethylene, polypropylene, and polycello were chosen as suitable packaging materials. Polyethylene is cheapest among them but kimchi packaged in this film was damaged frequently in handling process and gave off kimchi flavor. On the other hand polypropylene also gave off kimchi flavor, but its higher mechanical strength gave better protection to kimchi and it had superior display effect due to the transparancy. Therefore polypropylene made much better packaging material. Polycello proved to be the best packaging material from the standpoint of physical characteristics but its price is higher than that of other plastic films. To be effective, the thickness of plastic films for packaging kimchi must exceed 0.08mm. (3) Keeping property of kimchi appeared to be excellent by means of freezing. However, by the time the frozen kimchi was thawed out at room temperature, moisture loss due to drip was extensive, rendering the kimchi too stringy. (4) Preservation of kimchi at refrigerated temperatures proved to be the best method and under the refrigerated condition the kimchi remained fresh as long as 3 months. The best results were obtained when kimchi was held at $0^{\circ}C$. (5) In general, preservatives alone were not too elective in preserving kimchi. Among them potassium sorbate appeared to be most effective with the four fold extension of self-life at $20^{\circ}C$ and two fold extension at $30^{\circ}C$. (6) In heat sterilization the thickness of packaged kimchi product had a geat effect upon the rate of heat penetration. When the thickness ranged from 1.5 to 1.8cm, the kimchi in such package could be sterilized at $65^{\circ}C$ for 20 minutes. Kimchi so heat treated could be kept at room temperature as long as one month without apparent changes in quality. (7) Among combination methods, preservation at refrigerated and heat sterilization could be favorably combined. When kimchi was stored at $4^{\circ}C$ after being sterilized at $65^{\circ}C$ for 20 minutes, it was possible to preserve the kimchi for more than 4 months.

• Journal of Sericultural and Entomological Science
• /
• v.51 no.2
• /
• pp.173-179
• /
• 2013

This study was investigation for primary bionomical characteristics, emergence rate of wintering type pupa and oviposition preference, of Papilio xuthus. The emergence rate of wintering type pupa stored at cold chamber($4{\pm}1^{\circ}C$) was 85%, after 10 months. The average emergence rate of wintering type pupa during storage was 89.6%, and the emergence periods were $7.9{\pm}1.9days$ in room temperature. Mating ratio in large oviposition room, $6,000{\times}6,000{\times}3,500$ mm($W{\times}L{\times}H$), was $86.7{\pm}5.8%$ higher than $63.3{\pm}15.3%$ in small room, $2,500{\times}3,000{\times}2,000$ mm($W{\times}L{\times}H$). But the number of eggs in the large room were $137.0{\pm}16.5$ fewer than $141.7{\pm}20.4$ in the small room. As a result of oviposition preference experiment on three different host plants, 10 mated female laid $141.7{\pm}27.8$ on the leaves of Phellodendron amurensew more than $67.7{\pm}20.6$ on Zanthoxylum schinifolium and $77.0{\pm}21.8$ on Citrus unshiu. The egg periods were $4.4{\pm}0.8$ days after oviposition, and the hatchability was 92.2% in $25^{\circ}C$ room condition. The larval period were $19.9{\pm}2.1$ days in the high temperature, long day condition($25^{\circ}C$, 14L : 10D). The headwidth of each developmental larval stage were $0.72{\pm}0.02$(1st), $1.19{\pm}0.02$(2nd), $1.65{\pm}0.05$(3rd), $2.43{\pm}0.07$(4th), $3.21{\pm}0.12$(5th). The pupal ratio was 91.6%. The pupal period were $8.8{\pm}0.9$ days, and the emergence rate was 92.2%.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.2
• /
• pp.193-204
• /
• 1998

The single crystal of the $LiTaO_3$has large electro-optic effects, so it is applied to optical switch, acousto-optic deflector, and optical memory device as hologram using photorefractive effect. In this study, optic-grade undoped $LiTaO_3$and Fe:LiTaO$LiTaO_3$single crystals were grown by the Czochralski method and optical transmission and absorption spectrums were measured in the wavelength of UV-VIS range. The curie temperature was determined with DSC and by measuring capacitance for the grown undoped crystal and ceramic powder samples of various Li/Ta ratio. In case of having a 48.6 mol% $Li_2O$ as a starting Li/Ta ratio, the results of concentration variations were below 0.01 mol% $Li_2O$ all over the crystal, so it was confirmed that $LiTaO_3$single crystals were grown under congruent melting composition having optical homogeneity. The curie temperature of the Fe:$LiTaO_3$crystal was increased with increased with increased doped Fe concentrations;by the ratio of $7.5^{\circ}C$ increase per Fe 0.1 wt%. Also, the optical transmittance was about 78 %, which was sufficient for optical device.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.29 no.5
• /
• pp.595-602
• /
• 1996

The antimicrobial effects of two disinfectants commonly used in food industry on Listeria monocytogenes ATCC 15313 were studied. The two disinfectants tested were commercial benzalkonium chloride (BAC) and sodium hypochlorite (NaOCl). Their effects were studied on cells suspended in disinfectants (in vitro) and in the sponge model with the disinfectants (in vivo). When cells were exposed to $0\~0.1\%$ BAC and $0\~150\;ppm$ NaOCL for 20 minutes, BAC and NaOCl concentration more than $0.25\%$ and 100 ppm showed the antimicrobial effects respectively. This organism decreased rapidly during the first $0.5\~1$ minute followed by a slower decrease during the rest of the exposure time. Fifteen ml of cell solution $(about\;10^7\;CFU/ml\;in\;the\;TSB)$ was mixed with 15 ml of disinfectants in the sponge $(6.0{\times}4.0{\times}4.0cm)$, BAC and NaOCl concentration more than $0.1\%$ and 300 ppm showed the antimicrobial effects, and at $0.25\%$ and 800 ppm diminished in cell numbers 3-log cycles during the first 20 minutes. In the case of sponge model, 15 ml of cell solution and 15 ml of disinfectants $(0.25\%\;of\;BAC,\;800\;ppm\;of\;NaOCl)$ were suspended in the sponge during 20 minutes, washing with 200 ml of sterilized distilled water, and this sponge was transfered in the 100 ml TBS, and then incubated at various temperature. The cells were increased about 1-log cycle during 24 hrs at $5\~15^{\circ}C$. And the others temperature, the cells growth was in proporation to storage tepmerature and the cells were about $10^9\;CFU/ml$ after $1\~3$ days incubations.

• Microbiology and Biotechnology Letters
• /
• v.41 no.3
• /
• pp.327-334
• /
• 2013

For the development of hardy kiwi wine, we arranged for the post-maturity of hardy kiwi fruit, treated them with calcium carbonate and a pectinase enzyme complex, investigated the resulting physicochemical properties and conducted a sensory evaluation. The period determined for creating post-maturity in the hardy kiwi fruit was determined as 5 days storage at room temperature following maturity. During this time the yield of fruit juice was increased from 22.1% to 53.5% using 0.1% (v/v) cytolase PCL5 for 2 h at room temperature. 0.1% (w/v) calcium carbonate was also added during the process of aging, for the reduction of the sour taste. The fermentation trial of the hardy kiwi wine was prepared using water (25% or 50%), sugar ($24^{\circ}brix$), 0.1% (w/v) $CaCO_3$, 0.1% (v/v) cytolase PCL5, $K_2S_2O_5$ (200 ppm), and yeast ($1.5{\times}10^7$ cell/ml). Fermentation then occurred for 2 weeks at $20^{\circ}C$. The pH value, total acidity, alcohol, and reducing sugar content of the resulting hardy kiwi wines of 25% (v/w) and 50% (v/w) water, were in a range of pH 3.4-3.7, 1.12-1.21%, 14.3-14.4%, and 15-16 g/l, respectively. Citric acid and fructose constituted the major organic acids and the free sugar of the 25% and 50% hardy kiwi wine, respectively. Volatile flavor components, including 10 kinds of esters, 8 kinds of alcohols, 5 kinds of acids, 3 kinds of others and aldehydes, were determined by GC analysis. The results of sensory evaluation demonstrated that 50% hardy kiwi wine is more palatable than 25% hardy kiwi wine.

• Journal of Food Hygiene and Safety
• /
• v.35 no.5
• /
• pp.468-476
• /
• 2020

We aimed to analyze the microbiological quality of the ready-to-eat (RTE) side dishes collected from traditional markets, supermarkets, and cafeterias in Gyeonggi-do in 2019. A total of 108 samples were analyzed for total aerobic bacterial counts, coliforms and foodborne pathogens depending on place of purchase and cooking methods. Results show that Bacillus cereus was detected in 14 (12.9%) out of 108 samples of side dishes, while no other foodborne pathogens were detected. The mean detected level (range) of total aerobic bacteria depending on place of purchase was 5.8 log CFU/g (3.0 to 8.2 log CFU/g) for traditional markets, 4.3 log CFU/g (2.4 to 7.8 log CFU/g) for supermarkets, and 3.80 log CFU/g (0.0 to 6.8 log CFU/g) for cafeterias, indicating that there was a significant (P<0.05) difference in total aerobic bacterial counts among places of purchase. Among the samples, the highest counts of total aerobic bacteria and coliforms were detected in saengchae (raw vegetables), followed by namul (seasoned herbs, vegetables), bokkeum (stir-fried foods), and jorim (foods cooked in soy sauce). The growth of total aerobic bacteria in seasoned soybean sprouts was inhibited when the sprouts were stored at 4℃ up to 24 h, whereas bacteria rapidly grew at 20 and 35℃ after 3 and 6 h, respectively. These results reveal that storage temperature might play a significant role for the microbiological quality of seasoned soybean sprouts when they are sold in markets. Thus, this study suggests that RTE side dishes should be stored at refrigerated temperature when being sold at markets as well as after purchasing to improve their microbiological quality.

• Korean Journal of Food Science and Technology
• /
• v.32 no.3
• /
• pp.590-597
• /
• 2000

The rheological properties of ${\beta}-glucans$ isolated from non-waxy and waxy barley were investigated. ${\beta}-Glucan$ solutions showed pseudoplastic properties and their behaviors were explained by applying Power law model in the range of concentrations$(1{\sim}4%)$ and temperatures$(20{\sim}65^{\circ}C)$. The effects of temperature and concentration on the apparent viscosity at $700\;s^{-1}$ shear rate were examined by applying Arrhenius equation and power law equation, and their effect was more pronounced in waxy ${\beta}-glucan$ solutions. The activation energy for flow of ${\beta}-glucan$ solutions decreased with the increase of concentration, and the concentration-dependent constant A increased with the increase of temperature. The intrinsic viscosity of waxy ${\beta}-glucan$ was higher than that of non-waxy ${\beta}-glucan$. The transition from dilute to concentrate region occurred at a critical coil overlap parameter $C^*[{\eta}]=0.02.$ The slopes of non-waxy and waxy ${\beta}-glucan$ at $C[{\eta}] were similar, but the slope of waxy ${\beta}-glucan$ at $C[{\eta}]>C^*[{\eta}]$ was higher than that of non-waxy ${\beta}-glucan$. Dynamic viscoelasticity measurement showed that cross-over happened, and storage modulus was higher than loss modulus at frequency range above cross-over. ${\beta}-Glucan$ solutions formed weak gels after stored for 24 hr.

• Korean Journal of Food Science and Technology
• /
• v.12 no.4
• /
• pp.292-298
• /
• 1980

In order to improve the storage stability of powdered soybean curd, moisture sorption characteristics of the curd stored at specific relative humidity and temperature were investigated. The results obtained are summarized as follows; 1. When the fresh soybean curd (2cm thickness) was dried in a hot air drier at $55^{\circ}C$, it took 18 hrs to reduce its moisture content from 85% to 8.8%, and drying rate was very high during the first 5 hrs. 2. Equilibrum moisture content (E.M.C.) of powdered soybean curd by freeze drying was higher than that of sample by got air drying, but the particle size did not influence E. M. C. 3. The monolayer value of freeze dried powder of high E. M. C was higher than that of the hot air dried(8.30 vs 7.35). 4. The free energy for moisture absorption of freeze dried powder at 11% RH were 1285.1 cal/mole, 1323.5 cal/mole at $15^{\circ}C$ and $30^{\circ}C$, respectively, and the free energy of freeze dried product was lower that of hot air dried product. 5. The moisture sorption rate constant was not affected by particle size, and it showed that the moisture sorption rate decreased as temperature was increased. The rate constant of powder produced by freeze drying were 0.00804 at $15^{\circ}C$ and 0.00696 at $30^{\circ}C$.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.17 no.1
• /
• pp.27-35
• /
• 2014

The headspace solid-phase microextraction (HS-SPME) followed by gas chromatography/mass spectrometry procedure has been developed for the simultaneous determination of petroleum aromatic hydrocarbons such as benzene, toluene, ethylbenzene and xylene isomers (BTEX) and polycyclic aromatic hydrocarbons (PAHs) in seawater. The advantages of SPME compared to traditional methods of sample preparation are ease of operation, reuse of fiber, portable system, minimal contamination and loss of the sample during transport and storage. SPME fiber, extraction time, temperature, stirring speed, and GC desorption time were key extraction parameters considered in this study. Among three kinds of SPME fibers, i.e., PDMS ($100{\mu}m$), CAR/PDMS ($75{\mu}m$), and PDMS/DVB ($65{\mu}m$), a $65{\mu}m$ PDMS/DVB fiber showed the most optimal extraction efficiencies covering molecular weight ranging from 78 to 202. Other extraction parameters were set up using $65{\mu}m$ PDMS/DVB. The final optimized extraction conditions were extraction time (60 min), extraction temperature (50), stirring speed (750 rpm) and GC desorption time (3 min). When applied to artificially contaminated seawater like water accommodated fraction, our optimized HS-SPME-GC/MS showed comparable performances with other conventional method. The proposed protocol can be an attractive alternative to analysis of BTEX and PAHs in seawater.