• Tunnel and Underground Space
• /
• v.25 no.6
• /
• pp.568-576
• /
• 2015

In this study, scenarios based on the leakage of highly compressed air and fire occurrence turned out to be high risks in an operation stage of CAES facility were constructed and estimated. By combining Bernoulli equation with momentum equation, an expression to calculate an impact force of a jet flow of compressed air was derived. An impact force was found to be proportional to the square of diameter of fracture and the pressure of compressed air. Four types of fire scenarios were composed to evaluate an effects that seasonal change and location of fire source have on the spread behavior of smoke. Smoke from the fire ignited in the vicinity of CAES opening descended more quickly below the limit line of breathing than one from the fire occurred 10 m away from CAES opening, which is expected to occur due to a propagation of wave front of smoke. It was shown that a rate of smoke spread of the winter fire is faster than one of the summer fire and smoke from the winter fire spreads farther than one of the summer fire, which are dependent on the direction of air flow into access opening. Evacuation simulation indicated that the required safe evacuation time(RSET) of the summer and winter fires are 262, 670 s each.

• Korean Journal of Ecology and Environment
• /
• v.45 no.2
• /
• pp.252-260
• /
• 2012

The wetlands have eco-sociological values because their functions have proven to be useful to human society. Many countries are working to conserve and protect the wetland ecosystems. However, many wetlands have disappeared or have been fragmented due to a natural and/or anthropogenic disturbance. These isolated wetlands appear to work best in the landscape, as a spatially distributed system. We have analyzed the spatial-social distribution patterns of wetlands in Gyeongsangnam-do Province (GNP). We examined the frequency distribution of wetland sizes, the distances to the nearest wetlands, the shapes of the wetlands, land-use patterns, land owners, and official land values were confirmed as social characteristics for each wetland. A total of 146 wetlands (3,598.85 ha), including 76 riverine wetlands (1,955.60 ha), 49 palustrine wetlands (1,282.28 ha) and 21 mountain wetlands (1,282.28 ha) were identified in GNP. Most wetlands left for use to drainage were small (<2 ha) and located in agricultural areas. However, small and isolated wetlands were clustered, according to the location, indicating that these wetlands can be connected to each other using the linear riverine wetlands and water channels in agricultural areas. This is extremely valuable in maintaining the biodiversity, such that any loss of small wetlands will cause a direct reduction in the connectedness among populations of the remaining species. Due to most wetlands belonging to the nation or businesses, being classified as reservoirs (water storage areas), and consequently, degradation of wetlands will progress due to grand-scale engineering works. Therefore, wetland policy and ecologically sensitive laws and policies should be developed in order to promote the wise-use for wetlands.

• Journal of Wetlands Research
• /
• v.22 no.4
• /
• pp.312-320
• /
• 2020

Various LIDs with natural water circulation function are applied to reduce urban environmental problems and environmental impact of development projects. However, excessive Infiltration and evaporation of LID facilities dry the LID internal soil, thus reducing plant and microbial activity and reducing environmental re duction ability. The purpose of this study was to develop a real-time measurement system with complex sensors to derive the management plan of LID facilities. The test of measurable sensors and Internet of Things (IoT) application was conducted in artificial wetlands shaped in acrylic boxes. The applied sensors were intended to be built at a low cost considering the distributed LID and were based on Arduino and Raspberry Pi, which are relatively inexpensive and commercialized. In addition, the goal was to develop complex sensor measurements to analyze the current state o f LID facilities and the effects of maintenance and abnormal weather conditions. Sensors are required to measure wind direction, wind speed, rainfall, carbon dioxide, Micro-dust, temperature and humidity, acidity, and location information in real time. Data collection devices, storage server programs, and operation programs for PC and mobile devices were developed to collect, transmit and check the results of measured data from applied sensors. The measurements obtained through each sensor are passed through the Wifi module to the management server and stored on the database server in real time. Analysis of the four-month measurement result values conducted in this study confirmed the stability and applicability of ICT technology application to LID facilities. Real-time measured values are found to be able to utilize big data to evaluate the functions of LID facilities and derive maintenance measures.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.5
• /
• pp.113-124
• /
• 2010

In this study, the hybrid authorization quotation technique is based on the device ID for the integrity of the source region guarantee of user certificate, in order to improve the convenience and security for user in the hybrid PKI certificate Mechanism for authentication. The feature of the model in which it is presented from this paper is 5. First, because the user can select the policy himself in which it matches with each authentication situation and security level, the convenience can be improved. Second, the integrity of the source region of the user certificate can be guaranteed through the comparison of the DLDI Key, that is the hash-value of the device ID. Third, the security can be improved by continuously changing an encoding, and the value of the key in which it decodes through the EOTP Key. Fourth, the index value is added to a certificate, and the storage of a certificate is possible at the Multi-Device. Fifth, since the addi the inan aratus for the integrity of the source region guarantee of a certificate is not needed, the authentication process time can be reduced and the computational load of the certificate server can be reduced also.

• Spatial Information Research
• /
• v.19 no.6
• /
• pp.101-109
• /
• 2011

Climate change affects all components of the global environment system and, in turn, all components mutually interact and affect climate change through non-linear feedback processes. It is thus necessary to study the interaction between the climate and the environment, in order to comprehensively understand and predict climate and environment change. However, current relevant systems are limited to particular areas and do not sufficiently support the mutual linking of research studies. Therefore, this study develops prototype a GIS based integrated DB management system for supporting the climate and environment data storage, management and distribution. The integrated DB management system was developed using VB.NET languages and ArcObjects component. First, considering the demands of climate environment experts, the study areas are selected and the methods of data management and utilization were defined. In addition, a location-based GIS DB was created in order to aid in understanding climate change through visual representation. Finally, the integrated DB management system provides an efficient data management and distribution data and it creates synergistic effect on climate and environment study. It also contributes significantly to the comprehensive diagnosis and prediction of climate change and environment systems.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.6
• /
• pp.65-71
• /
• 2017

Digital images and videos are subject to various types of noise during storage and transmission. Among these noises, Salt & Pepper noise degrades the compression efficiency of the original data and causing deterioration of performance in edge detection or segmentation used in an image processing method. In order to mitigate this noise, there are many filters such as Median Filter, Weighted Median Filter, Center Weighted Median Filter, Switching Weighted Median Filter and Adaptive Median Filter. However these methods are inferior in performance at high noise density. In this paper we propose a new type of filter for noise mitigation in wireless communication environment where Salt & Pepper noise occurs. The proposed filter detects the location of the damaged pixel by Salt & Pepper noise detection and mitigates the noise by using adjacent pixel values which are not damaged in a certain area. Among the proposed filters, the performance of the filter using the $3{\times}3$ error mask is compared with that of the conventional methods and it is confirmed that when density of noise in the image is 95%, their performances are improved as 13.24 dB compared to MF and 13.09 dB compared to AMF.

• Journal of Korea Water Resources Association
• /
• v.48 no.9
• /
• pp.769-779
• /
• 2015

The streamflow depletion due to groundwater pumping from deep aquifer near the Juksan stream has been simulated, in this study, by using the surface water and groundwater integrated model, SWAT-ODFLOW in order to analyze the relationship between the stream depletion and hydraulic properties of aquifer and streambed, and to spatially assess the streamflow depletion. The simulated results showed that the streamflow depletion rate divided by the pumping rate for each well location ranges from 10% to 90% with reflecting the various well-stream distance, transmissivity, storativity, and streambed hydraulic conductance. In particular, the streamflow depletion exceeds about 50% of pumping rate for conditions with transmissivity higher than $10m^2/day$ or storage coefficient lower than 0.1. The simulated results in the form of spatial maps indicated that the spatially averaged percent depletion of streamflow is about 53.6% for five years of pumping which is lower than that for shallow aquifer pumping by 12.9%. From the spatially distributed stream depletion, it was found that higher and more rapid stream depletion to pumping occurs near middle-downstream reach.

• Journal of Navigation and Port Research
• /
• v.45 no.6
• /
• pp.366-371
• /
• 2021

This study suggests surface wave communication, which uses a metal surface as a medium, to provide wireless communication in the extreme environment due to surrounding metal materials on vessels. The test was conducted on a G/T 265 tons tug boat to confirm the possibility of surface wave communication between a bridge and each designated space in the ship. As a result, the transmission speed was 13Mbps on average. In a test case of the bridge via the engine room, the transmission speed was 4.3Mbps on engine running and 1.2Mbps on sailing. It overcame this by partially changing the equipment installation location. Surface wave communication in bow storage, a fully enclosed space, had 8Mbps better transmission speed than wireless communication; this confirmed the superiority of surface wave communication in confined spaces on a vessel. Additional surface wave generators were designed and applied to resolve the paint issue. It is expected to use surface wave communication to implement the new wireless solution for Maritime-IoT system on vessels.

• Ecology and Resilient Infrastructure
• /
• v.6 no.2
• /
• pp.79-88
• /
• 2019

In order to study the water quality status and its causal environmental factors, the water quality variables of chemical oxygen demand (COD), chlorophyll a (Chl a), Total phosphorus (TP), and total nitrogen (TN), the hydrogeomorphologic variables of water level fluctuation, total water storage, dam elevation, watershed area, and shoreline development index, and the land cover variables of forest, agricultural area, and urbanized area in the watershed were investigated in total 73 reservoirs with various operational purposes, water level fluctuation and geographical distribution in South Korea. The water quality was more eutrophic in the reservoirs of the more urbanized and agricultural area in the watershed, the low altitude, the narrow water level fluctuation, the narrowed watershed area, and the more circular shape. In terms of the purposes of reservoir operation, the reservoirs for agricultural irrigation were more eutrophic than the reservoirs for flood control. The results of the variable selection and path analysis showed that COD determined by Chl a and TP was directly affected by water level fluctuation and the shoreline development of the reservoirs. TP was directly affected by the urbanized area of the watershed which was related to the elevation of the reservoir. TP was also influenced by the water level fluctuation and the shoreline development. In conclusion, the eutrophication of the reservoirs in Korea would be influenced by the land use of the watershed, hydrological and geographical characteristics of the reservoir, water level fluctuation by the anthropogenic management according to the reservoir operation purpose, and the location of the reservoirs.

• Journal of Broadcast Engineering
• /
• v.26 no.6
• /
• pp.692-703
• /
• 2021

Recently, with the development of computer graphics technology, research on technology for expressing real objects as more realistic virtual graphics is being actively conducted. Point cloud is a technology that uses numerous points, including 2D spatial coordinates and color information, to represent 3D objects, and they require huge data storage and high-performance computing devices to provide various services. Video-based Point Cloud Compression (V-PCC) technology is currently being studied by the international standard organization MPEG, which is a projection based method that projects point cloud into 2D plane, and then compresses them using 2D video codecs. V-PCC technology compresses point cloud objects using 2D images such as Occupancy map, Geometry image, Attribute image, and other auxiliary information that includes the relationship between 2D plane and 3D space. When increasing the density of point cloud or expanding an object, 3D calculation is generally used, but there are limitations in that the calculation method is complicated, requires a lot of time, and it is difficult to determine the correct location of a new point. This paper proposes a method to generate additional points at more accurate locations with less computation by applying 2D interpolation to the image on which the point cloud is projected, in the V-PCC technology.