• 건축역사연구
• /
• 제16권2호
• /
• pp.99-118
• /
• 2007

Kyedan(戒壇) is an altar to perform a rite of Buddhist Initiation which gives Precept to a Buddhist monk. Sometimes it is called the Place of Precept and Mandala by Sanskrit. In this study, the Sutra of the Tang(唐) Dosun(道宣) regarding First Kyedan of Jetavana-anathapindasyarama(祇園精舍), which was the first temple such as, Kyedandokyung(戒壇圖經), Kiwonsadokyung(祇洹寺圖經), Sabunyul(四分律) were analyzed to find out original form and layout. Ultimately, the study was intended to examine the spatial formation-principle by comparing with Kyedan Temple. The results of this study could be summarized as below. First. Except for Kyedan in Bakryensa, the height of lower stone plate of Buddhist Bell-Shaped Stupa of Korean Kyedan is higher than three storied Kyedan that described in Kyedandokyung. Second. Buddhist Bell-Shaped Stupa above Kyedan was presumed that embodied image of Bell Pedestal and symbolism of overturned-bowl were combined together, when Kyedandokyung and Kiwonsadokyung were referred. It could be examined by the existence of stone lantern. Third. In Korea, the rite of Buddhist initiation that gives Precept in Kyedan has been considered impossible. However, when the rite was conducted, there was a possibility to establish wood stair. It is because that the Buddhist Stupa of Silleuuksa(神勒寺) and Woljeongsa(月精寺), which reflected the image of Kyedan had stone stair. Fourth, The method to build Kyedan of Dosun divided into Large Region and Small Region was applied to the method to construct Stone terrace behind Jeongmyeolbogung(寂滅寶宮) like Tongdosa(通度寺) and complete Kyedan on the stone terrace. In other words, Jeongmyeolbogung became Kyedanwon(戒壇院) and Kyedan, itself became Small Region. The area of Stone terrace became Large Region and naturally, they constituted an Institution. Fifth, Korean Kyedan which is consist of Jeongmyeonlbogung and Kyedan is a Korean original composition principles of Kyedangaram(戒壇伽藍) that can satiate all the functions of Kyedan as a religious subject and the place of the rite of Buddhist initiation, as it had complex of Outdoor Kyedan, which was suggested by the sutra of Dosun and Institution of Kyedan.

• 암석학회지
• /
• 제25권3호
• /
• pp.299-310
• /
• 2016

여주 고달사지 원종대사탑비는 과거 도괴되어 현재 귀부와 이수는 여주 고달사지에 남아있고 비신은 파손된 채 국립중앙박물관에 보관되어 있다. 탑비를 구성하는 암석은 두 종류로, 귀부와 이수는 조립질 흑운모화강암, 비신은 부분적으로 각섬석 집합체와 2~3 cm 크기의 장석반정이 특징적으로 관찰되는 세립질 흑운모화강암이다. 귀부와 이수의 조립질 흑운모화강암은 여주 일대에 분포하는 흑운모화강암과 전암대자율 및 암석기재적 특징이 매우 유사하다. 반면 비신의 암석은 이 지역 내에서 산출되는 암석과 다소 차이가 있어 국내 화강암의 전암대자율, 암석학적 특징, 탑비의 금석문과 고려시대 고문헌 기록을 토대로 유사한 암석의 산출지를 탐색하였다. 이 결과 북한 해주 지역의 화강암이 색상, 각섬석 집합체, 광물조성, 전암대자율 분포 등에 있어 비신의 세립질 흑운모화강암과 거의 동일하였다. 따라서 해주 화강암이 탑비 암석의 산지암석으로서 가능성이 가장 크며, 원종대사탑비 비신을 복제하기 위한 석재로 가장 적합한 것으로 판단된다.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.871-872
• /
• 2006

Nowadays the market for diamond tools grows rapidly. The present decline in the price of industrial diamond makes it a commoditised product capable of competing with conventional abrasives. In terms of production volume, the largest group of diamond tools comprises the metal-bonded diamond impregnated tools, such as sawblades, wire saws, and core drills for cutting stone and construction materials, and core bits for mining applications. This article provides a compendious coverage of the powder metallurgy (PM) diamond tool-making routes, and identifies the recent trends towards changing the tool design and composition to render it cheaper and more efficient.

• Bulletin of the Korean Chemical Society
• /
• 제23권11호
• /
• pp.1531-1540
• /
• 2002

With the invention of the inlaying technique for celadon in the latter half of the 12th century, the Koryo potters reached a new height of artistic and scientific achievement in ceramics chemical technology. Inlaid celadon shards, collected in 1991 during the surface investigation of Kangjin kilns found on the southwestern shore of South Korea, were imbedded in epoxy resin and polished for cross-section examination. Backscattered electron images were taken with an electron microprobe equipped with an energy dispersive spectrometer. The spectrometer was also used to determine the composition of micro-areas. Porcelain stone, weathered rock of quartz, mica, and feldspar composition were found to be the raw material for the body and important components in the glaze and white inlay. The close similarity between glaze and black inlay in the microstructure suggests that the glaze material was modified by adding clay with high iron content, such as biotite, for use as black inlay. The deep soft translucent quality of celadon glaze is brought about by its microstructure of bubbles, remnant and devitrified minerals, and the schlieren effect.

• 헤리티지:역사와 과학
• /
• 제54권2호
• /
• pp.22-37
• /
• 2021

풍탁은 한국, 중국, 일본에서 오랜 기간 사용되고 있는 불교 장엄구이다. 하지만 풍탁은 제작 시기를 추정하는 데 어려움이 있으며 유물의 수가 많지 않아 기초연구가 부족한 실정이다. 그러므로 본 연구에서는 미술사적 연구를 참고하여 논산 관촉사 석조미륵보살입상의 보개에 장식되어 있는 청동풍탁 8점을 형태학적으로 분류하였으며, 이에 따른 제작 기법 및 제작 시기에 대하여 과학적으로 규명하였다. 연구 결과를 종합해볼 때 보개의 위치에 따라 관촉사 석조미륵보살입상 청동풍탁은 형태 및 제작 기법의 특징이 나타났다. 대형인 하부 보개 청동풍탁 4점은 Cu-Sn-Pb 삼원계 합금을 주조 기법으로 제작하였으며, 서산 출토 동제풍탁과 형태가 매우 흡사하여 고려 전기에 조성된 것으로 확인된다. 중형인 상부 보개 북측 청동풍탁 2점은 Cu-Sn 또는 Cu-Sn-Pb 합금을 단조 기법으로 제작하였으며, 고려 후기~조선시대에 나타나는 원통형 풍탁과 형태가 유사하다. 소형인 상부 보개 남측 청동풍탁 2점은 미량의 아연(Zn)이 존재하는 것으로 판단되는 Cu-Sn-Pb 삼원계 합금을 주조 기법으로 제작하였으며, 합금 성분 및 치게의 형태 등을 통해 조선 후기에 제작된 것으로 보인다. 미세조직 관찰 및 성분 분석을 통해 하부 보개 청동풍탁 2점은 Cu:Sn:Pb≒80:15:5의 합금비를 지닌 삼원계 합금을 주조 후 서냉하여 제작하였음을 알 수 있다. 상부 보개 동북측 청동풍탁은 방짜유기와 유사한 합금비인 Cu-Sn 이원계 합금을 소재로 단조 기법으로 제작된 것으로 확인된다. 이를 국내 풍탁의 선행 연구와 비교·분석한 결과, 하부 보개 동측 청동풍탁 2점은 타명기에 적합한 주석 함유량을 지닌 고려시대에 제작된 강진 월남사지 출토 금동풍탁의 합금 조성비와 유사하게 확인된다. 방짜유기와 유사한 합금비를 지닌 상부 보개 동북측 청동풍탁은 현재까지 연구된 풍탁 중 유일하게 단조 기법으로 제작된 사례이다. 본 연구를 통해 풍탁의 제작 시기를 형태학적 특징으로 구분하는 데 있어 과학적인 근거를 통해 보다 명확하게 구분할 수 있는 기초자료를 제공하고자 하였다.

• KIEAE Journal
• /
• 제13권6호
• /
• pp.29-37
• /
• 2013

The modern town houses in Philippines has been changed through Spanish colonization over 300years and American military administration in 20C. Especially Cebu, the first contemporary capital of colonized Philippines by Spain, has various cultural characteristics and historical remains including old houses. By the economy condition in Cebu growing up, Bahay na bato, stone and wood house, has been settled for the elite or middle class of Cebu around 19C influenced by Spanish or Europe and Philippines native house called bahay kubo. Bahay na bato shows a common features, as revealed in this study, which all of them has a two stories with cut stone curtain wall and wooden beam and lintel, fronting the main street by approaching directly from street. And spatial separating also shown by setting living space to upper level instead of using storage or entrance hall called zaguan in lower level. Bahay na bato studied here shows a particular appearances in elevation, having volada and elaborate geometric or floral window pattern, also playing a role for ventilation with vetanilas below volada and main window in section. They have a rectangular plan with caida, sala, comedo, azotea almost similar to Spanish and ealier colonial Mexico style mixed with Philippines traditional style showing the strong spatial separation functionally and space wideness for party occasionally.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제21권2호
• /
• pp.67-73
• /
• 2015

Purpose: This study examines areal composition of ward applying to 4 bedroom in provincial medical center. Methods: The existing five-bed patient rooms, general type of multiple-bed rooms in Korea causes many problems for the amenity of patients. We should reconsider their inconvenience carefully and try to provide the right to keep their privacy and enjoy amenity. The number of patients of multi-bed rooms is very critical point to improve the environmental condition of the patient rooms. This study separate 5 bedroom group and 4 bedroom group. Net area from space program was surveyed and analyzed. Results: The result of this study can be summarized into two points. The first one is that Group-4(4 bedroom) ward has more 23% patient's area and -23% convenience area than Group-5(5 bedroom). The second one is that Group-4 has more single bedroom and Group-5 has more dayroom. Implications: Consideration Should be taken into account for the effective bedroom composition and allocation in ward. This Study hopefully may serve as a stepping stone for the standard design of space program in ward.

• 한국실내디자인학회논문집
• /
• 제20권3호
• /
• pp.22-32
• /
• 2011

The purpose of this study is on the application of the facade design of k-national university in deagu. The subjects of the study examined 75 buildings from the 117 university buildings in main campus. The analysis items is analyzed by several elements; flat and sloping roof, main entrance, design principle, style of architecture, finishing materials, and characteristics of design surveyed by analysis items. The results are as follows: In the 1950s, 2 subjects have shown conflicting characteristics except brick finishing materials. In he 1960s, flat make up 75% of a whole, centrality in main entrances occur, but have an asymmetrical, during this period vertical motif have been underlined by repetition of column, stone has application to main adminstration building. The buildings in the 1970s were so characteristics of modern architecture by painting and flat except main entrance at the center of facade. In the 1980s, position of main entrance have a corner of a wall, finishing materials of a wall were beginning to use stone, glass and metal. The buildings in the 1990s and 2000s are looking a three-dimensional composition by rhythm of superimposition and segmentation and all finishing materials of analysis items are in use.

• 한국문화재보존과학회:학술대회논문집
• /
• 한국문화재보존과학회 2001년도 제14회 발표논문집
• /
• pp.19-24
• /
• 2001

본 연구에서는 이집트의 피라밋, 스핑크스를 대상으로 현지풍화상태를 조사하고 이에 대한 장기적인 내구성을 분석하기 위해 동일 암석층인 카이로의 모카탐 채석장에서 시료를 채취하였다. 시료의 성분을 분석한 결과 기자지역의 석회암과 동일한 구성을 보여 향후내구성 평가실험에 적합한 것으로 나타났다. 인공풍화 실험 전후의 물성 변화를 통해 정량적 내구성을 측정하고 채색된 암석 표면에서 나타나는 풍화상태를 이미지 처리를 통해 분석함으로 석회암의 공학적 내구성을 효과적으로 분석 가능할 것으로 판단된다.

• 동력기계공학회지
• /
• 제17권2호
• /
• pp.108-113
• /
• 2013

In this study, lightweight aggregate was made from basalt stone powder sludge. Clay and glass powder were respectively added from 0 to 20 wt% and from 0 to 100 wt%. The glass powder helped to form glassy phase which trapped generating gas in the materials. $CaCO_3$ helping bloating process was added from 0 to 10 wt%. It was possible to produce lightweight aggregate at range from $1150^{\circ}C$ to $1200^{\circ}C$. The specimen was heated in furnace at 1100, 1150 and $1200^{\circ}C$ for 15 min, respectively, to sinter aggregates. Chemical composition of materials were determined, and characteristics were analyzed, including specific gravity, water absorption. Lightweight aggregate which was heated at $1200^{\circ}C$ had specific gravity of $0.53g/cm^3$, water absorption of 3.08%, and this value satisfied KS L 8551 standard.