• 자원환경지질
• /
• 제52권4호
• /
• pp.291-297
• /
• 2019

단열을 통한 유체의 유동은 선형유동이 우세하다는 가정아래 Navier-Stokes 방정식에서 유도된 Stokes 방정식, Reynolds 식(또는 local cubic law), cubic law 와 같은 방정식을 이용하여 해석되고 있다. 하지만 이러한 방정식은 선형 흐름에 국한되며, 비선형 유동영역에 적용하게 되면 오류가 발생한다. 본 연구에서는 레이저 계측기를 이용하여 정밀하게 측정한 3차원 단열 자료와 Navier-Stokes 방정식과 Stokes 방정식을 지배방정식으로 한 수치모델링을 수행함으로써 비선형 유동이 일어나는 현상과 임계 레이놀즈수를 제시하였다. 레이놀즈수가 10이상이 되면 유속의 제곱에 비례하는 관성력이 점성력을 충분히 압도할 정도로 커지면서 지하수 유동이 선형영역에서 비선형 유동영역으로 전환되는 것으로 분석되었다. 이는 평균 간극과 거친 정도가 다른 두 단열에서 모두 동일하게 나타났다. 비선형 유동의 발생기작은 소용돌이 구조의 발생과 성장에 의한 것으로 알려져 있지만, 본 연구결과 단순히 소용돌이 구조가 비선형 유동을 일으키는 아니라 유속이 증가하면서 관성력의 영향이 훨씬 큰 영향을 끼치게 되어 비선형 유동이 발생하는 것으로 나타났다.

• Journal of Mechanical Science and Technology
• /
• 제17권4호
• /
• pp.599-605
• /
• 2003

For practical calculations, the Reynolds equation is frequently used to analyze the lubricating flow. The full Navier-Stokes Equations are used to find validity limits of Reynolds equation in a lubricating flow regime by result comparison. As the amplitude of wavy upper wall increased at a given average channel height, the difference between Navier-Stokes and lubrication theory decreased slightly : however, as the minimum distance in channel throat increased, the differences in the maximum pressure between Navier-Stokes and lubrication theory became large.

• 한국물환경학회지
• /
• 제21권4호
• /
• pp.393-397
• /
• 2005

In this study, flow in a porous medium is analyzed using a computer-extended perturbation series solution. The flow is modelled as a creeping flow in a periodically constricted channel. The channel walls have a sinusoidally varying width and the flow is analyzed in terms of its vorticity and stream functions in the Stokes flow regime. The perturbation series in terms of a small parameter, average width to length ratio, is extended with a computer resulting in purely asymptotic series and Pade summation is used to obtain final results. Resulting flow shows flow separations in the widening section and immobile zones in the widest section of the flow regime with reattachment in the narrowing section. Analysis of the flow separation phenomena resulted in a correlation between the two geometric parameters of the channel walls to predict the onset of flow separation in the Stokes flow regime.

• 대한수학회지
• /
• 제43권4호
• /
• pp.733-763
• /
• 2006

We study quasi-stationary Stokes flow in a dihedral domain arising from a study of a free boundary problem of viscous fluid in a container. We construct an exact solution of quasi-stationary Stokes equations and derive its estimates with norm in a weighted Sobolev spaces.

• 대한기계학회논문집
• /
• 제11권5호
• /
• pp.755-761
• /
• 1987

본 연구에서는 익형 위에 발생하는 박리기포 주위를 사용한 박리기포 주위 유 동해석에 목적을 두고, 원시변수(primitive variable)를 사용한 부분 포물형 Navier -Stokes 방정식을 사용하여 층류유동에 관한 간단한 기본계산을 통해 비교적 박리기포 가 큰 외부유동(external flow)에도 부분 포물형 방정식이 적용될 수 있음을 보이고자 한다.수치해법은 Galpin 등 이 이차원 관유동(channel flow)에 완전 Navier-Stokes 방정식의 해법으로 사용한 CELS(coupled equation line solver) 방법을 부분 포물형 방정식에 적합하게 수정하여 사용하였다.

• 한국전산유체공학회지
• /
• 제20권3호
• /
• pp.54-61
• /
• 2015

In the present study, a flow solver using a kinetic BGK scheme was developed for the compressible Navier-Stokes equation. The kinetic BGK scheme was used to simulate flow field from the continuum up to the transitional regime, because the kinetic BGK scheme can take into account the statistical properties of the gas particles in a non-equilibrium state. Various numerical simulations were conducted by the present flow solver. The laminar flow around flat plate and the hypersonic flow around hollow cylinder of flare shape in the continuum regime were numerically simulated. The numerical results showed that the flow solver using the kinetic BGK scheme can obtain accurate and robust numerical solutions. Also, the present flow solver was applied to the hypersonic flow problems around circular cylinder in the transitional regime and the results were validated against available numerical results of other researchers. It was found that the kinetic BGK scheme can similarly predict a tendency of the flow variables in the transitional regime.

• 대한수학회지
• /
• 제49권6호
• /
• pp.1163-1174
• /
• 2012

This paper examines a temperature dependent Stokes flow in a semi-infinite cylinder. Under appropriate initial and boundary conditions the author establishes exponential decay of solutions in energy norm with distance from the finite end of the cylinder.

• 동력기계공학회지
• /
• 제2권3호
• /
• pp.15-20
• /
• 1998

An integrated computing system has been developed for a Navier-Stokes design procedure of an axial-flow compressor blades. The process is done on the four separate steps, i.e., determination of the basic profiles, generation of computational grids, cascade flow simulation and analysis of the computed results in design sense. Applications are made to the blade design of the LP compressor. Computational results are analyzed with respect to the flow-field characteristics and are compared with the expected design requirements. The present system are coupled with the design procedure of the turbomachinery blades using the Navier-Stokes technique.

• 대한기계학회논문집
• /
• 제16권2호
• /
• pp.313-324
• /
• 1992

Two-dimensional Navier-Stokes code has been developed for analysis of turbomachinery blade rows and other internal flows. The Navier-Stokes equations are written in a Cartesian coordinate system, then mapped into a generalized body-fitted coordinate system. All direction of viscous terms are incorporated and turbulent effects are modeled using the Baldwin-Lomax algebraic model. Equation are discretized using finite difference method on the C-type grids and solved using implicit LU-ADI decomposition scheme. Calculations are made at a VKI turbine cascade flow in a transonic wind-tunnel and compared to experimental data. Present numerical scheme is shown to be in good agreement with the previous experimental results and simulates the two-dimensional viscous flow phenomena.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집B
• /
• pp.597-602
• /
• 2000

In a MEMS(micro-electro mechanical system), the fluid may slip near the surface of a solid and have a discontinuous temperature profile. A numerical prediction in this slip flow region can provide a reasonable guide for the design and fabrication of micro devices. The compressible Navier-Stokes equation with Maxwell/smoluchowski boundary condition is solved for two simple systems; couette flow and pressure driven flow in a long channel. We found that the couette flow could be regarded as an incompressible system in low speed regions. For the pressure driven flow system, we observed nonlinear distribution of pressure in the long channel and numerical results showed a good agreement with the experimental results.