• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.12
• /
• pp.1702-1710
• /
• 2001

Supersonic coaxial jets are investigated numerically by using the axisymmetric, Wavier-Stokes equations which are solved using a fully implicit finite volume method. Three different kinds of coaxial nozzles are employed to understand the flow physics involved in the supersonic coaxial jets. Two convergent-divergent supersonic nozzles are designed to have the same Mach number 2.0, and used to compare the coaxial jet flows with those discharging from one constant-area nozzle. The impingement angle of the annular jets are varied. The primary pressure ratio is changed in the range from 2.0 to 10.0 and the assistant jet ratio from 1.0 to 3.0. The results obtained show that the fluctuations of the total pressure and Mach number along the jet axis are much higher in the constant-area nozzle than those in the convergent-divergent nozzles, and the constant-area nozzle lead to higher total pressure losses, compared with the convergent-divergent nozzles. The assistant jets from the annular nozzle affect the coaxial jet flows within the distance less than about ten times the nozzle throat diameter, but beyond it the coaxial jet is conical with self-similar velocity profiles. Increasing both the primary jet pressure ratio and the assistant jet pressure ratio produces a longer coaxial jet core.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.16 no.1
• /
• pp.17-26
• /
• 1998

This paper deals with gravimetric geoid determination by Fast Hartely transform (FHT) technique in and around the Korean peninsula. A number of data files were compiled for this work, containing now more than 69, 001 point gravity data on land and ocean areas. Especially, regression was applied to estimate gravity anomalies in the northern area of peninsula. For evaluating accuracy of geoid obtained, GPS/Leveling data of 49 stations were prepared. EGM96 global geopotential model to degree 360 was used in order to determine the long wavelength effect of geoid undulations. By applying the remove-restore technique geoid undulations were determined by combining a geopotential model, free-air gravity anomalies. Fast Hartley Transform technique is a suitable solution that uses the advanced spectral technique on the sphere. It was applied to predict geoid undulations by Stokes's integral. Accuracy of geoid undulations was evaluated by comparing with results derived from GPS/Leveling. Standard deviation of differences is about 33 cm.

• Journal of the korean Society of Automotive Engineers
• /
• v.6 no.2
• /
• pp.14-19
• /
• 1984

종래에 많이 사용된 각양의 계측 방법을 일일이 설명하는 것은 본 해설의 목적이 아니기 때문에 개략적으로 분류하여 설명하면 다음과 같다. 1) 시간 평균유속은 주로 프로브(probe)를 경유하여 동압과 정압의 측정에 의하여 수행되어 왔다. 연소반응이 있으면 밀도의 변화가 있게 되는데 밀도는 후술하는 농도의 계측과 온도의 계측에 의하여 정해져 동압과 정압으로부터 유속으로 변환된다. 시간분해능이 높은 비접촉식(직접 프 로브를 측정부에 삽입하지 않는 방법) 유속측정이 가능한 방법으로는 레이저 도플러 유속계 (Laser Doppler Velocimetry, 이하 LDV로 표현)를 들 수 있다. LDV는 압력측정에 의한 유속 산출법에서와 같은 온도 및 농도 등의 부수적인 계측이 필요없이, 직접 유속을 검출할 수 있으며 또한 검정이 필요없는 절대유속 측정이 가능하며 현재 연소반응이 있는 흐름에 대한 대부분의 연구에 적용되고 있는 실정이다. 2) 시간평균 화학종 농도측정에 가장 많이 쓰이는 방법은, 연소가스를 채취하여 가스 크로마토 그라프(Gas Chromatograph)로 분석하는 것을 들 수 있다. 한편, 시간 분해능이 높은 화학종 농 도의 계측은 레이저를 사용하여 각 화학종의 발광, 산란 및 흡수성을 이용, 측정한다. 3) 온도측정은 대부분 열전대를 사용하고 있다. 그러나 이 방법은 직접 프로브를 삽입해야 하므로 사용한계의 범위가 지극히 좁으며, 연소반응이 일어나므로 프로브 자체의 촉매반응 및 복사 열전달에 의한 보정 등이 사용상 큰 문제로 제기된다. 그러나 최근 레이저 이용기술의 발달로 (2)항에서의 농도 계측과 같이 반응기체의 온도 및 성분의 동시측정이 가능한 방법도 점차 현 실화 되어가고 있다. 그 대표적인 예로 CARS법(Coherent Anti-Stokes Raman Spectroscopy)을 들 수 있다. 이상으로부터 연소반응이 일어나는 흐름에서의 각종 계측에서는, 비접촉 측정의 가능성과 시간 공간 분해능의 특징으로 미루어 앞으로는 레이저를 이용한 계측 방법이 그 주류를 이룰 것으로 사료된다. 우선 본 해설은 기체의 온도 및 농도의 광학적 측정방법중 Raman산란광 검출법에 대하여 실제로 측정하는 입장에서 간단히 소개한다.

• Journal of the Society of Naval Architects of Korea
• /
• v.48 no.3
• /
• pp.222-232
• /
• 2011

This article examines the scale effect of the flow characteristics, resistance and propulsion performance on a 317k VLCC. The turbulent flows around a ship in both towing and self-propulsion conditions are analyzed by solving the Reynolds-averaged Navier-Stokes equation together with the application of Reynolds stress turbulence model. The computations are carried out in both model- and full-scale. A double-body model is applied for the treatment of free surface. An asymmetric body-force propeller is used. The speed performances including resistance and propulsion factors are obtained from two kinds of methods. One is to analyze the computational results in model scale through the revised ITTC' 78 method. The other is directly to analyze the computational results in full scale. Based on the computational predictions, scale effects of the resistance and the self-propulsion factors including form factor, thrust deduction fraction, effective wake fraction and various efficiencies are investigated. Scale effects of the streamline pattern, hull pressure and local flow characteristics including x-constant sections, propeller and center plane, and transom region are also investigated. This study presents a useful tool to hull-form and propeller designers, and towing-tank experimenters to take the scale effect into consideration.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.11
• /
• pp.999-1007
• /
• 2013

The present work reports numerical results of the pressure drop and heat transfer characteristics of pipes with various shapes such as circular, elliptical, circumferential wavy and twisted using a three-dimensional simulation. Numerical simulations are calculated for laminar to turbulent flows. The fully developed flow in pipes was modeled using steady incompressible Reynolds-averaged Navier-Stokes (RANS) equations. The friction and Colburn factor of each pipe are compared with those of a circular tube. The overall flow and heat transfer calculations are evaluated by the volume and area goodness factor. Finally, the objective of the investigation is to find a pipe shape that decreases the pressure loss and increases the heat transfer coefficient.

• Journal of Korea Water Resources Association
• /
• v.38 no.3 s.152
• /
• pp.189-198
• /
• 2005

This study showed that numerical simulation can be effectively used to analyze discharge capacity according to the form and arrangement of the lock gate of a tidal power plant. For the numerical simulation, FLOW-3D with Reynolds-averaged Navier-Stokes equation as a governing equation was used. This study found that improvement of apron length and approach angle of guide wall of the lock gate causes differences in discharge capacity of $10\%$ or more. In addition, there was a difference of discharge capacity caused by the connecting structures of the drainage gate and hydraulic turbine structure and the side slope at the end of apron. This study also showed that hydraulic investigation to enhance a discharge capacity is needed when the lock gate is designed and that numerical model experiments can be a useful analysis tool to design the drainage structure, as well as the hydraulic model experiment.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.522-526
• /
• 2007

항공사진을 이용하여 하천의 경년변화를 조사하다 보면, 사주 변동에 따라 하천의 주 흐름이 다양하게 변화되고 있음을 알 수 있다. 이처럼 특정 하천의 지정된 구간에서의 흐름변동은 많은 시간에 걸쳐 이루어진다. 바꾸어 말하면, 짧은 시간 동안 자연하천에서의 주 흐름 변화를 관찰 하기는 일반적으로 매우 어렵다. 본 연구에서는 이틀이라는 짧은 시간 동안에, 하천에서의 주 흐름 변동에 따른 특성변화를 조사하였다. 이러한 조사는 "조정지 댐에서의 수문 조작"이라는 인위적인 방법을 동원함으로서 가능하였다. 모든 조정지 댐에서는 하천 유지를 위한 일정양의 물을 수문을 통하여 방류한다. 대청댐 하류에 있는 조정지 댐에는 폭이 약 10m에 이르는 10개의 수문이 있다. 평상시에는 우안으로부터 5번째에 있는 중앙의 수문을 개방하여 초당 약 18톤의 물을 방류한다. 그러므로 본 연구에서는 방류하고자 하는 지점의 수문높이를 조정하여 일정량을 유지한 채, 수문의 위치를 중앙에서 좌안 그리고 우안의 순으로 변경 하였다. 방류 수문 위치를 변경함에 따라 하천에서의 수리특성을 조사하기 위하여, 흐름이 안정 될 때까지 충분히 기다린 후, 각각의 경우에서의 하류지역을 대상으로 현지관측 및 수치실험을 실시하였다. 조사는, 첫째 지형측량, 유량측정 및 수위변동 등을 포함한 정밀현장조사, 둘째 일반적인 모델에 정밀조사 결과를 적용시킴으로서 얻을 수 있는 가시화 기법 개발 등의 순으로 진행하였다. 수치실험에 사용한 모델은 하천에서의 흐름거동을 2차원적으로 해석하는데 많이 사용되고 있는 상용프로그램인 SMS (Surface-Water Modeling System)의 RMA2 모형이다. 이모형은 RMA (Resource Management Associates, Inc.)에 의해 처음 개발된 2차원 유한요소 모델이며 지배방정식은 z방향을 수심 적분한 2차원 천수방정식으로, x와 y방향에 대한 Navier-Stokes 방정식과 연속 방정식으로 구성된다. 본 연구에서는 현장 조사 시 지배인자 파악의 중요성 및 수치계산을 위한 검증자료의 필요성을 강조하기 위하여, 일반적인 방법으로 수행한 계산 결과 및 다양한 현장 특성을 고려한 계산 결과를 비교 하였다. 그 결과 본 연구는 (1)최신 장비들의 도입 및 검증과 기존 장비의 활용 범위 확대, (2)기존의 상용 프로그램을 이용한 하천 흐름특성의 가시화 실현 등에 의의가 있다고 사료된다.

• Journal of Korea Water Resources Association
• /
• v.38 no.3 s.152
• /
• pp.179-188
• /
• 2005

This study on the HwaBuk Multipurpose Dam showed that two- and three- dimensional numerical model experiments, as well as hydraulic model experiments, can be useful analysis tools for engineers. A commercially available RMA2, which solves the shallow water equations, and FLOW-3D, which solves the Reynolds averaged Navier-Stokes equations, were used to simulate the hydraulic model setup. Numerical simulation results on the following were compared with the hydraulic model results: the flow in the reservoir basin and the approaching channel; the discharge in the overflow weir; the water surface profiles in the rollway, chute, and stilling basin; and the pressure distributions in the rollway. It was shown that there is a reasonably good agreement between the numerical model and the hydraulic model for the most of computations. There were, however, some differences between the numerical simulation results and hydraulic model results for the hydraulic jump in the stilling basin because of air entrainment effect.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.2 no.4
• /
• pp.208-222
• /
• 1990

The nonlinear hydrodynamic pressure force and moment on hinged wavemakers of variable-draft are presented. A closed-form solution (correct to second-order) for the nonlinear wavemaker boundary value problem has been obtained by employing the Stokes perturbation expansion scheme. The physical significance of the second-order contributions to the hydrodynamic pressure moment are examined in detail. Design curves are presented which demonstrate both the magnitude of the second-order nonlinearities and the effects of the variable-draft hinge height. The second-order contributions to the total hydrodynamic force and moment consist of a time-dependent and a steady part. The sum of the first and second-order pressure force and moment show a significant increase over those predicted by linear wavemaker theory. The second-order effects are shown to vary with both relative water depth and wave amplitude. The second-order dynamic effects are relatively more important for hinged wavemakers with shallower drafts.

• Food Science and Biotechnology
• /
• v.16 no.6
• /
• pp.935-942
• /
• 2007

The stem bark of Rhus verniciflua (RVSB) has been used in herbal medicine to treat diabetes mellitus and stomach ailments for thousands of years in Korea, despite its content of the plant allergen, urushiol. A new biological approach for the removal of urushiol from RVSB using mushrooms is described. All mushroom species (11 sp.) employed in this study were able to grow on RVSB, although the growth rate (mm/day) was lower than the control (sawdust). The components of urushiol congeners [C15 triene (m/z 314), C15 diene (m/z 316), C15 monoene (m/z 318), and C15 saturated (m/z 320)] were purified by HPLC and identified by GC-MS. A C15:3 (3-pentadecatrienly catechol) was found to be most abundant in RVSB. Urushiol analogues decreased remarkably from 154.15 to 10.73 mg/100 g (approximately 93%) by Fomitella fraxinea, whereas Trametes vercicolor showed only a 1.46% degradation capacity despite its 2 fold higher growth rate. Similarly, laccase activity was found to be high for F. fraxinea and low for T. vercicolor. Moreover, approximately 98% detoxification was accomplished by F. fraxinea cultivated on RVSB supplemented with 20%(w/w) rice bran. These findings suggest that mushrooms can be used in the detoxification of RVSB.