• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2003.10a
• /
• pp.303-308
• /
• 2003

Facility management system has been studied recently due to its increasing demand. As a starting step it is necessary to create 3-D shape of the facility. In this study, we attempted to create 3-D shape of the buildings by fusing the raster and vector information. the raster information comes from stereo aerial photographs and the vector information comes from the existing 2-D digital map. GPS surveying and data conversion using ACAD and ARCINFO also performed to extract building height from stereo aerial photographs. Finally we could be able to perform semi-automatic 3-D building modeling with fusion of two sources of information.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.22 no.1
• /
• pp.73-80
• /
• 2004

The purpose of this study is the GCP/DEM estimations through satellite stereo image interpretation using GPS. We carried out GPS observation fixing first order control points and GPS permanent stations. Comparing static surveying and kinematic surveying, we analysed the surveying methods for GCP and DEM estimations. As the results, considering SPOT image spatial resolution, the DEM can be made through satellite stereo image interpretation.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2003.04a
• /
• pp.321-326
• /
• 2003

The subjects of this study are to examine and to apply the methods of making 1:5,000 scale maps using 1m resolution stereo images of IKONOS for the Munsan area of Paju-city where aerial photo surveying cannot possible because of security conditions. GCP(Ground Control Point) were acquired from GPS surveying and were to perform geometric corrections on images. Digital Map used IKONOS stereo images and it worked from the digital analytical stereoplotter. From field investigation, RMSE errors of the plane and vertical positions are estimated to 1.706m and 1.231m, respectively. The plane accuracy is better than an accuracy required by NGIS (national GIS) programs. Local information from field investigation was added and the resulting maps should be good as digital map under the scale of 1/5,000.

• ETRI Journal
• /
• v.26 no.5
• /
• pp.497-500
• /
• 2004

In this paper, we present a novel idea to integrate a low cost inertial measurement unit (IMU) and Global Positioning System (GPS) for land vehicle localization. By taking advantage of positioning data calculated from an image based on photogrammetry and stereo-vision techniques, errors caused by a GPS outage for land vehicle localization were significantly reduced in the proposed bimodal approach. More specifically, positioning data from the photogrammetric approach are fed back into the Kalman filter to reduce and compensate for IMU errors and improve the performance. Experimental results are presented to show the robustness of the proposed method, which can be used to reduce positioning errors caused by a low cost IMU when a GPS signal is not available in urban areas.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.16 no.2
• /
• pp.177-185
• /
• 1998

There is an increasing request for 3D data and outlines on building for urban planning and design. This paper describes an approach to extract building using Digital Surface Models(DSM) and stereo pairs of aerial images. DSM contain informations not only about the topographic surface like Digital Elevation Models(DEM), but also about buildings and other objects higher than the surrounding topographic surface, e.g. tees. We therefore describe our approach consisting of two step procedures. The first step of the approach is to generate DSM by stereo matching using Maximum Likelihood Estimation and Dynamic Programming. The proposed stereo matching is using the cost function for finding the disparity between the left and right image, and the Dynamic Programming for solving the stereo matching problem. The second step is to detect building outlines using the DSM and the edge informations extracted from a digital aerial image by Sobel Operator. The overlay analysis of the DSM and the edge information by Sobel Operator was efficient to detect building outlines.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.34 no.5
• /
• pp.471-478
• /
• 2016

This paper proposes the results of analysis of correlation between satellite geometry elements for an effective use of satellite images. To achieve accurate positional information, stereo images have normal range of convergence and BIE (BIsector Elevation) angles which are greatly influenced by azimuth and elevation angle of individual image. In this paper, the variations of convergence and BIE angles are estimated according to azimuth angle differences between two images and each elevation angle. The analysis provided strong support for predicting stereo geometry without complex analysis of epiploar geometry or mathematics. The experiment results showed that more than 150°, 130°, and 100° azimuth angle differences need to be constructed when elevation angle of two images is 50°, 60°, and 70°, respectively, in order to make the convergence and BIE angle within normal range. The results are expected to be fully used for various application using stereo images.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.7 no.1
• /
• pp.27-35
• /
• 1989

Sport photographing by the Stereo-Camera generally used in Europ, Japan, etc was applied to the traffic-accident analysis more preferreatially than the measuring with Tape where some problems are found in its accuracy and duribility. Time for photographing and that for measuring a datum point were compared causes for accidents were analyzed by spot drawing PAMS, with a patameter of an exclusively used drawing set, after 3-dimensions were first measured and computed in Stereo-model. Also the collision-angle, the direction of the handle and the quartity of loss after a clash were computed by using a accident vehicle as a model those data was suggested as a way of potential practical the accidents at large.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.20 no.1
• /
• pp.13-19
• /
• 2002

In a different way of satellite image or aerial photo, the image acquired by terrestrial photogrammetry has to go through complicated management according to the desired precision and analysis range. In this study, digital surface model and ortho image for cultural asset, terrestrial structures, were made by reflectorless total station in order to increase the application of single photo, and that was analyzed and compared with the method using stereo image. Single photo is expected to be utilized as the measuring method for drawing cultural assets or examining the stability of slope in which high precision doesn't need by performing the various geometric and visual analysis using ortho image made by excluding the difficulties of acquisition and plotting of stereo image.

• Explosives and Blasting
• /
• v.36 no.1
• /
• pp.12-19
• /
• 2018

When an underground limestone mine selects room-and-pillar mining method, in which the stability of mine openings is maintained by leaving safety pillars, the stability of safety pillars is always incompatible with their productivity. Therefore, the engineering decision for stability and productivity is essential. In this study, a progress of excavation faces by conventional blasting pattern has been examined in field for investigating over-break and stereo-photogrammetry method has been applied to this field measurement for improvement of accuracy. Also this result has been reflected instantly to composite blasting pattern by feedback, for minimizing overbreak. Field tests showed the relevant results that $3.5m^2$ in over-break out of $70m^2$ in total excavation face has been decreased, that is 5% of reduction rate in maximum.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.144-144
• /
• 2002

Analysis techniques using stereo-photos of object is used widely in close-range-photogrammetry field. but, there is difficulty to use metric camera for specialist. In this study, stereo images were acquired using metric camera and general digital camera about slide in Youngdong area. And they were generated two DEMs based metric camera and digital camera. And it was analyzed the correlation of two DEMs. Therefore, in research that was presented effectiveness of digital camera take the place of metric camera for slope analysis.