• Journal of the Korean Institute of Telematics and Electronics
• /
• v.25 no.3
• /
• pp.269-275
• /
• 1988

In this paper, a high efficiency motor drive system which improves the multi-step response of PM step motors by reducing the transition time of the motor drive current, is studied by designing a dual-voltage drive circuit. The designed drive circuit eventually prevents the motor from decreasing drive torque while the stepping rate is increased. The method of designing a dual-voltage drive circuit with the motor specifications is suggested in order to improve the response of step rate and drive efficiency. Also, despite improving the power efficiency on motor driving, the response characterstics suggested by the motor manufacture's specifications are satisfied without any special deficiency.

• Journal of Korean Society for Quality Management
• /
• v.19 no.1
• /
• pp.151-162
• /
• 1991

The purpose of this study is to propose a facility layout design algorithm based on artificial intelligence concept, and then to develop a computer program which is more practical than any other conventional facility layout design systems. The algorithm is composed of five step layout procedures; knowledge and data input, knowledge interpretation, priority determination, inference of layout design, and evaluation, In the step of priority determination, the algorithm is divided into single row and multi row layout problem. In the step of inference of layout design, alternatives are generated by constraints-directed reasoning and depth first search method based on artificial intelligence concept. Alternatives are evaluated by the moving cost and relationship value by interactive man-machine interface in the step of evaluation. As a case study, analytical considerations over conventional programs such as CRAFT and CORELAP was investigated and compared with algorithm propsed in this study. The proposed algorithm in this study will give useful practical tool for layout planner. The computer progran was written in C language for IBM PC-AT.

• Reproductive and Developmental Biology
• /
• v.30 no.1
• /
• pp.59-64
• /
• 2006

This study was conducted to establish a convenient freezing method of boar semen. Boar semen was cooled until $5^{\circ}C$ for 3 hrs using cell freezer and loaded into straws. Semen straws were frozen in different steps in strofoam box filled with $LN_2$. Highest sperm viability (54.0%) was obtained by 1-step freezing(holding at 10 cm height from the surface of $LN_2$ for 10 min). Sperm viability increased by holding at $-102^{\circ}C$ for 10min (74.0%, P<0.05). In thawing regime, sperm viability was significantly higher in $37^{\circ}C$ group than in $52^{\circ}C$ group. The sperm characteristics did not differ between 1-step and 3-step. After IVF using frozen-thawed boar semen, developmental rate of embryos to the morula+blastocyst stage was in 1-step freezing group than that of 3-step freezing group (27.5 vs 14.7%, P<0.05). The result shows that the 1-step freezing with holding at $-102^{\circ}C$ for 10min before plunging into $LN_2$ is a convenient and easy freezing method for boar semen.

• Archives of Pharmacal Research
• /
• v.12 no.4
• /
• pp.254-256
• /
• 1989

Synthesis of spiro 1, 4-dihydropyridines by a novel and facile one step method is reported. Structures and reaction are also reported with a support by another synthetic routes.

• Journal of the Korean Geotechnical Society
• /
• v.18 no.2
• /
• pp.51-64
• /
• 2002

Observational results of ground movement during the construction were very different from those predicted during the analysis of design step because of the uncertainty of the numerical analysis modelling, the soil parameter, and the condition of a construction field, etc., however accurately numerical analysis method was applied for prediction of ground movement per the excavation step. Therefore, the management system through the construction field measurement should be achieved for grasping the situation during the excavation. Until now, the measurement system restricted by 'Absolute Value Management system'analyzing only the stability of present step has been executed. So, it was difficult to expect the prediction of ground movement fur the next excavation step. In this situation, this study developed 'The Management system TOMAS-EXCAV'consisted of 'Absolute value management system'analyzing the stability of present step and 'Prediction management system'expecting the ground movement of next excavation step and analyzing the stability of next excavation step by 'Back Analysis'. TOMAS-EXCAV could be applied to all the uncertainty of earth retaining structures analysis by connecting 'Forward analysis program'and 'Back analysis program'and optimizing the main design variables using SQP-MMFD optimization method through measurement results. The applicability of TOMAS-EXCAV was confirmed by back analysis selecting two earth retains construction fields.

• Journal of Positioning, Navigation, and Timing
• /
• v.4 no.4
• /
• pp.195-203
• /
• 2015

In this study, the carrier acceleration-ramp-step test was applied to GPS carrier phase measurements, and the results were compared and analyzed. In the carrier acceleration-ramp-step test, the acceleration, ramp, and measurements are estimated using 10 consecutive carrier phase measurements for satellites observed at the same time based on the least square method. As for the characteristic of this test, if failure occurs in the measurement, the value jumps significantly compared to the previous result; but it judges that failure has occurred in all the satellites although failure has occurred in one satellite. Therefore, in this study, a method that eliminates a satellite with failure was suggested, and thresholds of the carrier acceleration, ramp, and step were suggested. The evaluation of the failure detection performance of carrier phase measurement using the suggested thresholds showed that failure could be detected when the carrier phase measurement changed abruptly by more than about 0.1 cycles.

• The Journal of the Acoustical Society of Korea
• /
• v.26 no.2
• /
• pp.69-74
• /
• 2007

In signal processing applications with highly correlated input signals, subband affine projection algorithm and step size controlling is a good solution for improving the slow convergence rate and large computational complexity of LMS-type algorithms. This paper proposes a subband affine projection algorithm using a variable step size. The proposed method achieves fast convergence rate and small steady-state error with a small computational complexity by combining the SAP and step size controlling in a subband structure. Experimental results on highly correlated input signal show that the proposed method is superior to the conventional methods.

• Journal of Korea Multimedia Society
• /
• v.12 no.7
• /
• pp.913-921
• /
• 2009

Quantization is an essential method for compression of video. The quantizer can adjust the bitrate and control the picture quality. Especially, the subjective picture quality can be improved if the concerned region within a video sequence has good picture quality. In this paper, firstly a classification method according to the subjective concerned region within the video sequence is suggested. Also we propose a method that assigns the quantization step-size differentially according to the concerned region within the video. Totally subjective picture quality can be increased by appling the quantization step-size as small value relatively for the concerned region compared with the other regions. We can find the result that the proposed method gives the improved picture quality by assigning differently quantization step-size and the best improvement can be brought when the difference between maximum and minimum values of the quantization step-size in a picture is from 4 to 8.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.3
• /
• pp.45-53
• /
• 2015

A I-V and P-V characteristic of solar cell is changed to nonlinear by radiation and temperature. Therefore, to use efficiently PV system, operating point of PV system is must operate at maximum power point always. A performance of conventional the PO and the IC method is depend on the step size. So it has weakness which is must select optimal step size. Also, MPPT control applying PI and fuzzy control is not expected satisfactory performance, because of PI controller has fixed gain and fuzzy control has cumulative error by an integral calculus. Therefore, this paper proposes the VS-PO(Variable Stepsize - Perturbation & Observation) MPPT control that is automatically adjusted the step size according to the operating conditions. The VS-PO MPPT method proposed in this paper analyzes control characteristic about condition of radiation and compares with conventional methods. The validity of this paper proves using this results.

• Journal of the Society of Naval Architects of Korea
• /
• v.33 no.4
• /
• pp.48-59
• /
• 1996

The numerical step in the unsteady viscous flow analysis can be divided in the space analysis step satisfying continuity equation and the time marching step. In this study the spectral method is applied to solve the pressure Poisson equation in the space analysis step. If the highest order differential term of the pressure Poisson equation is transformed by Fourier series, pressure arid its first derivatives can be expressed by the integral form of Fourier series. So Gibb's phenomena can be eliminated and the spectral method can be applied to non-periodic problems. The numerical analysis of unsteady viscous flow around 2-dimensional circular cylinder and wing is carried out and compared for verification.