• International Journal of Reliability and Applications
• /
• 제15권1호
• /
• pp.23-50
• /
• 2014

This paper deals with formulation of optimum multi-objective modified step-stress accelerated life test (ALT) plan for Burr type-XII distribution under type-I censoring. Since it is impractical to estimate only one objective parameter after conducting costly ALT tests; also, it is not desirable to assume instantaneous changes in stress levels because of limited capacity of test equipments and the presence of undesirable failure modes, therefore, an optimum multi-objective modified step-stress ALT plan has been designed. The optimal test plan consists in determining the optimum low stress level and optimal time at which stress starts linearly increasing from low stress by minimizing the weighted sum of the asymptotic variances of the maximum likelihood estimator of quantile lifetimes at design constant stress. The method developed has been illustrated using an example. Sensitivity analysis has been carried out. Comparative study has also been done to highlight the merits of the proposed model.

• 한국지능정보시스템학회:학술대회논문집
• /
• 한국지능정보시스템학회 2002년도 춘계학술대회 논문집
• /
• pp.429-434
• /
• 2002

For companies assembling end products from sub assemblies or components, MRP (Material Requirement Planning) logic is frequently used to synchronize and pace the production activities for the required parts. However, in MRP, the planning of operational-level activities is left to short term scheduling. So, we need a good scheduling algorithm to generate feasible schedules taking into account shop floor characteristics and multi-level job structures used in MRP. In this paper, we present a GA (Genetic Algorithm) solution for this complex scheduling problem based on a new gene to reflect the machine assignment, operation sequences and the levels of the operations relative to final operation. The relative operation level is the control parameter that paces the completion timing of the components belonging to the same branch in the multi-level job hierarchy. In order to revise the fixed relative level which solutions are confined to, we apply large step transition in the first step and GA in the second step. We compare the genetic algorithm and 2-phase optimization with several dispatching rules in terms of tardiness for about forty modified standard job-shop problem instances.

• 대한산업공학회지
• /
• 제21권4호
• /
• pp.593-608
• /
• 1995

In this study two issues are considered, one is to develop a pneumatic servomechanism using a direct-connected circuit between inlet and outlet, the other is to design two kinds of advanced controllers such as fuzzy and PID controllers for a fingering system. Besides, the application of the advanced controllers to the newly proposed servomechanism is presented. The procedure of this study is composed of following 6 steps : [Step 1] Structuring of a control system; [Step 2] Development of a pneumatic circuit for the servomechanism ; [Step 3] Characteristic analysis of the valve and cylinder systems ; [Step 4] Determination of optimal parameters of the PID controller ; [Step 5] Design of a fuzzy controller and parameter tuning; and, [Step 6] Experimental analysis of fuzzy and PID controllers. Experimental results show that the newly proposed pneumatic servomechanism has good performance and, not only the performance of the fuzzy controller is better than that of the PID controller but also the fuzzy controller fits well to the control of the pneumatic servomechanism.

• 한국음향학회지
• /
• 제28권8호
• /
• pp.815-821
• /
• 2009

소음이 존재하고, 신호의 전달 시스템이 가변적인 환경에서 신호처리는 일반적으로 적응 알고리즘에 의해 이뤄진다. 다양한 적응 알고리즘들 중에서 LMS 알고리즘은 연산량이 적고, 구현이 쉬우며, 성능이 훌륭해 가장 널리 쓰이는 알고리즘이 되었다. LMS 알고리즘의 성능에 영향을 미치는 가장 중요한 요소 중 하나가 Step Size이다. 일반적으로, Step Size가 크면, 알고리즘 수렴 속도는 빨라지지만, 수렴 오차는 커지게 되고, Step Size가 작으면 수렴 오차는 작아지지만, 수렴 속도는 느려진다. Step Size의 이러한 특성을 상호 보완하고자 많은 방법들이 제안되어 오고 있다. 본 논문에서는 오차 제곱 변화 곡선의 기울기로부터 현재 상태에 대한 카테고리를 분류하여, Step Size를 매 단계마다 적절하게 가변시킴으로써, 결과적으로 수렴 속도와 정확도, 연산량을 향상시킨 새로운 개념의 Categorized 가변 스텝 사이즈 LMS 알고리즘을 제시하고, 그 성능은 실험을 통하여 수렴 속도와 Excessive Mean Square Error (EMSE), 연산량의 관점에서 향상되었음을 검증하였다.

• 한국항공우주학회지
• /
• 제37권4호
• /
• pp.383-391
• /
• 2009

JP-7/산소 혼합기의 데토네이션 파 특성을 상세 반응 기구로부터 얻은 일 단계 유도 변수 모델을 (IPM) 이용하여 살펴보았다. 탄화수소 혼합기에 대한 상세 화학 반응 모델로 부터 신뢰할 만한 일 단계 반응 모델을 얻기 위한 일반적 과정을 본 연구에서 제시하였다. IPM은 상세 반응 모델 라이브러리로부터 획득한 유도 시간 데이터베이스를 재구성하여 얻었으며, 상세 반응 모델에 의한 결과와 비교하여 확인하였다. 이후 IPM을 유체역학해석 코드에 적용하였으며, 데토네이션 파 전파에 대한 수치해석에 이용하였다. 수치해석 결과는 탄화수소 연료 연소의 상세 반응 기구를 직접 적용해서는 가능하지 않은, JP-7/산소 혼합기의 데토네이션 파 전파 특성의 상세한 특징을 보여주었다.

• 한국통신학회논문지
• /
• 제36권3C호
• /
• pp.157-162
• /
• 2011

동시 등화는 통신 채널을 블라인드 등화 시 수렵 특성 개선에 유용하다. 그러나 동시 등화는 등화기가 정상상태에 수렴한 후에도 동시 적응을 계속함으로써 성능 개선이 제한적이다. 본 논문에서는 동시 등화의 수렴 특성과 함께 정상상태 성능을 개선하기 위해, 가변 수렴상수와 가중치기반의 탭 계수 갱신을 적용하는 새로운 동시 등화 기법을 제안한다. 제안하는 동시 vsCMA+DD 등화는 가변 수렴상수 CMA(variable step-size CMA: vsCMA)와 판정의거 (decision-directed: DD) 알고리즘의 오차 신호를 사용하여 가중치를 산출하고, 이를 이용하여 두 등화기를 각각 가중 갱신한다. 제안 방법은 vsCMA에 의해 CMA의 오차 성능을 개선하고, 가중치기반의 탭 계수 갱신에 의해 수렴 속도와 정상상대 성능을 개선하였다. 모의실험을 통해 제안 방식의 성능 개선을 검증하였다.

• 전기학회논문지
• /
• 제60권12호
• /
• pp.2281-2285
• /
• 2011

An algorithm for extracting SPICE MOS level 2 model parameters for the high voltage MOSFET DC model is proposed. The optimization method for analyzing the nonlinear data of the current-voltage curve using the Gauss-Newton algorithm is proposed and the pre-process step for calculating the threshold voltage and the mobility is proposed. The drain current obtained from the proposed method shows the maximum relative error of 5.6% compared with the drain current of 2-dimensional device simulation for the high voltage MOSFET.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.801-804
• /
• 2006

The purpose of this paper is to investigate the stability of stepped cantilever columns with a tip mass of rotatory inertia and a translational spring at one end. The column model is based on the Bernoulli-Euler theory which neglects the effects of rotatory inertia and shear deformation. The governing differential equation for the free vibration of columns with stepwise variable cross-section and subjected to a subtangential follower force is solved numerically using the corresponding boundary conditions. And the bisection method is used to calculate the critical divergence/flutter load. The frequency and critical divergence/flutter load for the stepped column with a single step are presented as functions of various non-dimensional system parameters: the segmental length parameter, the section ratio, the subtangential parameter, the mass, the moment of inertia of the mass, and the spring parameter.

• 전자공학회논문지S
• /
• 제34S권6호
• /
• pp.58-66
• /
• 1997

This paper proposes a multiresolution surface parameter estimation method for range images. Based on robust estimation of surface parameters, it approximates a patch to a planar surface in the locally adaptive window. Selection of resolution is made pixelwise by comparing a locally computed homogeneity measure with th eglobal threshold determined by te distribution of the approximation error. The proposed multiresolution surface parameter estimation method is applied to range image reconstruction. Computer simulation results with noisy rnag eimages contaminated by additive gaussian noise and impulse noise show that the proposed multiresolution reconstruction method well preserves step and roof edges compared with the conventional methods. Also the segmentation method based on the estimated surface parameters is shown to be robust to noise.

• 소음진동
• /
• 제9권1호
• /
• pp.103-112
• /
• 1999

A new modeling and analysis technique for one-dimensional distributed parameter systems is presented. First. discretized equations of motion in Laplace domain are derived by applying discretization methods for partial differential equations of a one-dimensional structure with respect to spatial coordinate. Secondly. the z and inverse z transformations are applied to the discretized equations of motion for obtaining a dynamic matrix for a uniform element. Four different discretization methods are tested with an example. Finally, taking infinite on the number of step for a uniform element leads to an exact dynamic matrix for the uniform element. A generalized modal analysis procedure for eigenvalue analysis and modal expansion is also presented. The resulting element dynamic matrix is tested with a numerical example. Another application example is provided to demonstrate the applicability of the proposed method.