• 제목/요약/키워드: Steep Gradient

검색결과 132건 처리시간 0.024초

Steep plasma density gradient at middle latitudes observed by DMSP and TOPEX during the magnetic storm of 11-12 April 2001

  • Park, Sa-Rah;Kim, Khan-Hyuk;Kil, Hyo-Sub;Jee, Geon-Hwa;Lee, Dong-Hun;Goldstein, J.
    • 한국우주과학회:학술대회논문집(한국우주과학회보)
    • /
    • 한국우주과학회 2011년도 한국우주과학회보 제20권1호
    • /
    • pp.26.3-27
    • /
    • 2011
  • Formation of a steep plasma density gradient in the middle-latitude ionosphere during geomagnetic storms and the latitudinal migration of its location depending on the storm phase are suggested to be associated with the ionospheric signature of the plasmapause. We test this idea by using the satellite and ground observation data during the 11 April 2001 storm. The locations of the steep plasma density gradient identified by TOPEX/Poseidon (2001 LT) and DMSP (1800 and 2130 LT) satellites coincide with the ionospheric footprints of the plasmapause identified by the IMAGE satellite. This observation may support the dependence of the middle-latitude plasma density gradient location on the plasmapause motion, but does not explain why the steep density gradient whose morphology is largely different from the morphology of the middle-latitude ionization trough during quiet period is formed in association with the plasmapause. The ionospheric disturbances in the total electron content (TEC) maps shows that the steep TEC gradient is formed at the boundary of the positive ionospheric storm in low-middle latitudes and the negative ionospheric storm in middle-high latitudes. We interpret that the thermospheric neutral composition disturbance in the dayside is confined within the middle-high latitude ionospheric convection zone. The neutral composition latitudes and, therefore, the locations of the steep plasma density gradient coincide with the footprints of the plasmapause. The TEC maps show that the appearance of the steep plasma density gradient in the pre-midnight sector during the recovery phase is related to the co-rotation of the gradient that is created during the main phase.

  • PDF

Uniqueness of an Optimal Run-up for a Steep Incline of a Train

  • Vu, Xuan
    • International Journal of Railway
    • /
    • 제2권2호
    • /
    • pp.70-79
    • /
    • 2009
  • An optimal driving strategy of a train in a long journey on a nonsteep track has four phases: an initial power phase, a long hold speed phase, a coast phase and a final brake phase. The majority of the journey is speed holding. On a track with steep gradients, it becomes necessary to vary the strategy around steep sections of track because it is not possible to hold a constant steep on steep track. Instead we must interrupt the speed hold phase with a power phase. The aim of this paper is to show that there is a unique power phase that satisfies the necessary conditions for an optimal journey. The problem is developed and solved for various cases, from a simple single steep gradient to a complicated multiple steep gradient section. For each case, we construct a set of new conditions for optimality of the power phase that minimises the energy used during the power phase subject to a weighted time penalty. We then use the new necessary conditions to develop a calculate scheme for finding an optimal power phase for a steep incline. We also present an example to confirm the uniqueness of an optimal power phase.

  • PDF

급구배 및 급곡선 궤도 추진시스템 개발 및 성능 평가 (Development and performance evaluation of traction system for steep gradient and sharp curve track)

  • 서승일;문형석;문지호;석명은
    • 한국산학기술학회논문지
    • /
    • 제17권9호
    • /
    • pp.493-501
    • /
    • 2016
  • 본 연구에서는 급곡선과 급구배가 많은 산악 도로 상의 궤도에서 운행할 수 있는 산악트램의 추진시스템 핵심 기술을 개발하였다. 국내 산악 관광지는 겨울철 폭설과 결빙에 의해 교통이 통제되고 있어 지형 조건 뿐만 아니라 기후 조건에도 무관한 산악철도가 필요하다. 먼저, 일반적인 120‰ 구배 등반에 소요되는 견인전동기 출력을 고려하여 추진시스템을 설계하였으며, 추진장치 설치 공간을 고려하여 동력 전달 계통을 설계하고 감속기 및 동력 전달축을 개발하였다. 급구배 상승을 위해 필요한 랙앤피니언 추진장치의 강체 접촉에 의한 진동 소음을 줄이기 위해 탄성 피니언을 개발하여 적용하였으며, 충격 비교 시험을 통해 기존 강체 피니언에 비해 진동이 1/3이하로 감소됨을 확인하였다. 반경 10m의 급곡선을 운행할 수 있도록 개별 회전 차륜 차축을 개발하였다. 또한 급구배 주행중 제동력 향상을 위해 밴드 제동장치를 개발하였으며, 제동력 시험을 통해 요구 제동력을 발휘할 수 있음을 확인하였다. 개발된 주요 부품은 시험을 통해 성능을 검증하였고, 최종적으로 급구배 및 급곡선 운행 대차시스템에 적용된다.

자유면 대수층에서 지형 경사와 강우를 고려한 수리경사 변동 분석 (Analysis of hydraulic gradient variation according to topographic gradient and rainfall in unconfined aquifer)

  • 김병우;강동환;조원기;박경덕
    • 한국수자원학회논문집
    • /
    • 제56권10호
    • /
    • pp.691-695
    • /
    • 2023
  • 본 연구에서는 효교리 지역에서 지형 경사가 다른 2개 구간을 설정하여 구간별 수리경사를 산정하고 지형 경사와 강우에 따른 수리경사 변동을 분석하였다. 연구부지 내 모든 지하수공에서 강우량이 증가할수록 지하수위가 상승하는 것으로 나타났으며, 지하수위 상승량은 지하수공의 고도가 높을수록 작았다. 연구부지 내 수리경사의 변동은 지형 경사가 급한 구간에서는 크고 지형 경사가 완만하면 작았다. 강우에 의한 수리경사 변동은 지형 경사가 급한 구간에서는 강우에 의한 영향성이 높았으며, 지형 경사가 완만한 구간에서는 강우에 의한 영향성이 낮았다. 본 연구를 통해 자유면 대수층에서 수리경사 변동은 지형 경사와 강우에 의한 복합적인 영향으로 나타남을 알 수 있었다.

급경사 자갈하상 만곡수로의 최대세굴심 산정공식 평가 (Estimation methods of maximum scour depth in steep gravel-bed bend channel)

  • 조재웅;남아름;우태영;박상덕
    • 한국수자원학회논문집
    • /
    • 제49권6호
    • /
    • pp.529-536
    • /
    • 2016
  • 본 연구는 급경사 자갈하상 만곡수로의 이동상 수리실험을 이용하여 만곡부 최대세굴심 산정공식들의 적용성을 평가하였다. 평균입경 43mm의 하천자갈을 $90^{\circ}$ 만곡 급경사 개수로에 포설하고 유량과 하상경사에 따른 만곡부의 최대세굴심을 조사하고 세굴심 공식으로 산정한 최대세굴심과 비교하였다. 자갈하상 만곡부 국부세굴은 유입부의 하상경사 0.02이상 $F_r$ 0.95이상에서 발생하였다. 이 수로에서 Lacey공식과 Zeller공식을 제외한 기존 세굴심 산정공식들은 최대세굴심을 과대 추정하는 것으로 나타났다. 하상재료를 고려한 Lacey공식과 접근경사와 만곡도를 반영한 Zeller공식은 급경사 자갈하상 만곡부의 최대세굴심 평가에 적용될 수 있는 것으로 판단된다.

DEM을 이용한 한반도 지형의 경사도 분석 (The Gradient Analysis of the Korean Peninsula by using DEM)

  • 이금삼;조화룡
    • 한국지리정보학회지
    • /
    • 제3권1호
    • /
    • pp.35-43
    • /
    • 2000
  • DEM(DTED LEVEL 1)을 ARC/INFO로 처리하여 한반도 지형의 경사도를 분석하였다. 한반도는 완경사 사면이 차지하는 비율이 아주 높고, 평탄지나 급경사지의 비율은 낮게 나타난다. 평탄지와 파상지는 고도 150m 이하 지역에 대부분 분포하고, 경사가 가장 급한 고도대는 500m~1,000m 지역이며, 1,000m 이상 지역은 고원의 경관을 보이고 있다. 수치지질도와 경사분석도를 중첩했을 때 고고도와 급경사를 이루는 지질은 화강편마암(ARgr), 편마암(PR1), 평안계 사암(P-T), 자성층군($J_2$) 등으로 나타났고, 저고도에 완만한 경사를 보이는 지질은 엽리상화강암($Jgr_1$), 백악기 퇴적암($K_1$, $K_2$), 신생대 퇴적암(N) 등이며, 제 4기에 분출한 현무암은 높은 고도에 완만한 용암대지를 이루고 있다.

  • PDF

가중평균 해석법을 이용한 래핑된 베어링강 어닐링재료의 깊이방향에 대한 잔류응력분포 측정 (Measurement of Residual Stress Distribution in the Depth Direction of Annealed Materials of Lapped Bearing Steel Using Weighted Averaging Analysis Method)

  • 한창석;이찬우
    • 한국재료학회지
    • /
    • 제33권5호
    • /
    • pp.205-213
    • /
    • 2023
  • This paper reports the results of an experimental examination using X-rays to test annealing materials for lapped bearing steel (STB2), to confirm the validity of the weighted averaging analysis method. The distribution behavior for the α𝜓-sin2𝜓 diagram and the presence or absence of differences in the peak method, half-value breadth method, and centroid method were investigated. When lapping the annealed bearing steel (STB2) material, a residual stress state with a non-directional steep gradient appeared in the surface layer, and it was found that the weighted averaging analysis method was effective. If there is a steep stress gradient, the sin2𝜓 diagram is curved and the diffraction intensity distribution curve becomes asymmetric, resulting in a difference between the peak method, half-value breadth method, and centroid method. This phenomenon was evident when the stress gradient was more than 2~3 kg/mm2/㎛. In this case, if the position of the diffraction line is determined using the centroid method and the weighted averaging analysis method is applied, the stress value on the surface and the stress gradient under the surface can be obtained more accurately. When the stress gradient becomes a problem, since the curvature of the sin2𝜓 diagram appears clearly in the region of sin2𝜓 > 0.5, it is necessary to increase the inclination angle 𝜓 as much as possible. In the case of a lapping layer, a more accurate value can be obtained by considering 𝜎3 in the weighted averaging analysis method. In an isotropic biaxial residual stress state, the presence or absence of 𝜎3 can be determined as the presence or absence of strain for sin2𝜓≈0.4.

강우침투 메커니즘을 이용한 급경사지 붕괴예측 I-D 기준식 제안 (Recommendation of I-D Criterion for Steep-Slope Failure Estimation Considering Rainfall Infiltration Mechanism)

  • 송영갑;김영욱;김동욱
    • 한국지반공학회논문집
    • /
    • 제29권5호
    • /
    • pp.65-74
    • /
    • 2013
  • 본 연구에서는 우리나라에서 발생된 자연재해 및 급경사지 재해 사망자 현황을 분석하고, 급경사지 붕괴사례를 대상으로 강우특성과 기반암 풍화토에 따른 재해 발생빈도를 분석하였다. 또한, 선행연구에서 제시한 급경사지 붕괴 예측 기준을 고찰하여 한계점을 도출하고, 불포화 무한사면 안정이론을 도입하여 급경사지 붕괴예측 기준으로 활용하고자 하였다. 지반의 경사, 수리적-역학적 특성을 고려할 수 있는 불포화 무한사면의 안정이론을 이용하여 안정해석을 수행하였으며, 산정된 안전율에 안전수준을 나타낼 수 있는 경계기준을 제시하여 급경사지 붕괴예측 기준을 제안하였다. 또한 급경사지 붕괴 위험단계에 해당하는 강우량을 Intensity-Duration 기준 수식으로 제시하였다.

Merging Features and Optical-NIR Color Gradient of Early-type Galaxies

  • 김두호;임명신
    • 천문학회보
    • /
    • 제36권1호
    • /
    • pp.57.1-57.1
    • /
    • 2011
  • It has been suggested that merging plays an important role in the formation and the evolution of early-type galaxies (ETGs). Optical-NIR color gradients of ETGs in high density environments are found to be less steep than those of ETGs in low density environments, hinting frequent merger activities in ETGs in high density environments. In order to examine if the flat color gradients are the result of dry mergers, we studied the relations between merging features, color gradient, and environments of 281 low redshift ETGs selected from Sloan Digital Sky Survey (SDSS) Stripe82. The sample contains 222 relaxed ETGs, 38 ETGs with tidal features, 10 galaxies with dust features and 11 galaxies with tidal and dust features, and Near Infrared (NIR) images are taken from UKIRT Infrared Deep Sky Survey (UKIDSS) Large Area Survey (LAS). We find that r-K color gradients of field sample galaxies are steeper than those of sample ETGs within cluster environments. For the field sample galaxies, a relatively large number of galaxies with peculiar features contribute to the steeper color gradients, while the absence of these peculiar early-type galaxies make color gradients of the cluster sample galaxies intact. In high density environment, ETGs are already evolved and relaxed, resulting flat color gradients. However, in low density environments, a majority of ETGs undergone merging recently which makes the color gradients steep.

  • PDF

Shear anchor behavior and design of an embedded concrete rack rail track for mountain trains

  • Hyeoung-Deok Lee;Jong-Keol Song;Tae Sup Yun;Seungjun Kim;Jiho Moon
    • Computers and Concrete
    • /
    • 제33권4호
    • /
    • pp.373-384
    • /
    • 2024
  • In this study, a novel mountain train system was developed that can run along a steep gradient of 180 ‰ and sharp curve with a minimum radius of 10 m. For this novel mountain train, an embedded precast concrete rack rail track was implemented to share the track with an automobile road and increase constructability in mountainous regions. The embedded rack rail track is connected to a hydraulically stabilized base (HSB) layer with shear anchors, which must have sufficient longitudinal resistance because they bear most of the traction forces originated from the rack rail and longitudinal loads owing to the steep gradient. In addition, the damage to the shear anchor parts, including the surrounding concrete, must be strictly limited under the service load because the maintenance of shear anchors inside the track is extremely difficult after installation. In this study, the focus was made on the shear anchor behavior and design an embedded rack rail track, considering the serviceability and ultimate limit states. Accordingly, the design loads for mountain trains were established, and the serviceability criteria of the anchor were proposed. Subsequently, the resistance and damage of the shear anchors were evaluated and analyzed based on the results of several finite element analyses. Finally, the design method of the shear anchors for the embedded rack rail track was established and verified.