• 토지주택연구
• /
• 제12권4호
• /
• pp.103-117
• /
• 2021

인구 및 기술의 변화속도가 빠른 현재 상황에서 장수명주택인증은 건물의 물리적 및 기능적 수명 연장 견인책이다. 장수명주택 인증요건인 가변성과 수리용이성은 인필요소를 구조와 구분하여 교체 및 변경하도록 유도한다. 이러한 방식은 공업화주택의 특징과도 부합하여 설계 및 시공방법의 변화로 두 가지 주택 유형은 함께 활성화될 수 있을 것이다. 본 연구에서는 이러한 특징을 고려하여 OSC공법을 활용한 공동주택 모델이 장수명주택 인증기준을 충족하도록 계획하였다. 이러한 결과로 평면가변성 및 설비배관의 설치방법, 화장실 공사 방법 등을 습식 공법과는 다른 방식을 적용하여 제시하였다. 가변형 평면은 22m²와 46m²의 두 가지 타입 평면을 확장하여 69m²평면을 만드는 세대통합방법 그리고 가변 가능한 건식패널 벽체를 활용하여 69m²평면을 여러 가지로 계획하는 방법을 제안했다. 이러한 가변성은 9m×10.5m 스팬의 강콘크리트 합성구조 및 일체형 슬래브로 SI시스템 중 서포트 부분을 구성하고 비내력 외벽 및 내벽, 배관 등을 인필부분으로 구분하여 건축구성재를 부품화하는 방식으로 만들 수 있다. 이러한 서포트와 인필 분리 만으로도 시공법과 관련된 기준을 상당부분 충족할 수 있다. 현재 인필요소를 교체 용이하게 하는 기술은 탄소저감 등에서 국가에 편익이 증가할 수 있으므로 활성화를 위해 세제혜택 등의 인센티브 도입을 검토할 필요가 있다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1993년도 봄 학술발표회논문집
• /
• pp.125-133
• /
• 1993

Preflex composit girder is intended for a better use on both steel and concrete by introducting prestress into the lower flange concrete with preflection. In Korea, recently preflex bridges are widely used especially for urban construction but the design method depends on the conventional ASD(Allowable Stress Design). This paper suggests an optimization model for the design of preflex composite bridges based on LIFD(Load Resistance Factor Design). The optimization algorithm adopted for the NLP model proposed in the paper is the FTM(Flexible Tolerance Method) which is very efficient for the approximate continuous optimization. For the discrete optimum results, a pesudo discrete optimization is used for the economical round-up to the available dimensions. The economic effectiveness of optimum design based on the LRFD method is investigation by comparing the results with those of the ASD method. Based on applications to the actual design examples, it may be concluded that the optimization model suggested in the paper provides economical but reliable design. And the suggested in the paper provides economical but reliable design. And the computer code for the automatic optimum design of preflex bridges developed in the paper for a CAD system may be successfully used in practice.

• 한국물환경학회지
• /
• 제16권4호
• /
• pp.469-477
• /
• 2000

Bisphenol-A (BPA), a known endocrine disruptor, is a main building block of epoxy resin which is widely used as a coating agent in residential water storage tanks. Therefore, BPA leaching from the epoxy resin may have adverse effects on human health. The possibility of BPA leaching from three epoxy resins were tested with a modified KS D 8502 method at 20, 50, 75 and $100^{\circ}C$ in deionized water and the specified test water, respectively. BPA leached to the test water was identified using GC-MS and quantified with GC-FID after a sequential extraction and concentration. The results showed that BPA leaching has occurred in all three samples tested. The quantify of BPA leaching from unit area of epoxy resin coating was in the range of $10.677{\sim}273.120{\mu}g/m^2$ for sample A, 29.737~1734.045 for sample B and 52.857~548.778 for sample C depending on the test temperature, respectively. In general, the amount of BPA leaching increased as the water temperature increases. This result implies a higher risk of BPA leaching to drinking water during a hot summer season. In addition, microbial growth, measured by colony forming units, in epoxy coated water tanks was higher than that in a stainless steel tank suggesting that compounds leaching from epoxy resin may support the growth of microorganisms in a residential water holding tank.

• 한국건설순환자원학회논문집
• /
• 제5권2호
• /
• pp.168-176
• /
• 2017

본 연구에서는 원전 구조물용 콘크리트의 잔골재로 부순모래를 사용하기 위한 연구의 일환으로 기존의 부순모래 생산공정에서 임팩트크러셔(Impact crusher)의 성능(회전수)을 높여 입형을 개선하고 ASTM C 33에 적합하도록 입도를 조정한 부순모래의 입형 및 입도 특성을 검토하였으며, 강모래에 대한 치환률에 따라 콘크리트를 제조하여 콘크리트 배합 특성, 굳지 않은 콘크리트 특성 및 경화한 콘크리트 특성을 검토하였다. 실험결과, 대부분의 콘크리트 특성이 강모래만을 사용한 콘크리트와 동등한 수준으로 나타났지만, 강모래에 대한 치환률 50% 이상일 경우, 치환률 증가에 따라 허용 범위 내에서 공기량, 압축강도 및 인장강도는 다소 감소되는 것으로 나타났다.

• 복합신소재구조학회 논문집
• /
• 제5권3호
• /
• pp.8-16
• /
• 2014

Torque control method and turn of nut method are specified as clamping method of high strength bolts in the steel construction specifications. Quality control of torque coefficient is essential activity because torque control method, which is presently adopted as clamping method in domestic construction sites, is affected by variation of torque coefficient. The clamping of torque shear bolt is based on KS B 2819. It was misunderstood that the tension force of the TS bolt was induced generally at the break of pin-tail specified. However, the clamping forces on slip critical connections do not often meet the intended tension, as it considerably varies due to torque coefficient dependent on the environmental factors and temperature variables despite the break of the pin tail.This study was focused to evaluate the effect of environmental factors and errors of installing bolts during tightening high strength bolts. The environmental parameters were composed of 'wet' condition, 'rust' condition, 'only exposure to air' condition. And the manufacture of trial product was planned to identify the induced force into the bolts. The algorithm for a trial product was composed of the relation between electricity energy taken from torque shear wrench and tension force from hydraulic tension meter.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.1392-1397
• /
• 2010

Currently in increasing number of urban tunnels with small overburden are excavated according to the principle of the New Austrian Tunneling Method(NATM). Successful design, construction and maintenance of NATM tunnel demands prediction, control and monitoring of ground displacement and support stress high accuracy. A magnetic anisotropy sensor is used for non-destructive measurement of stress on surfaces of a ferromagnetic material, such as steel. The sensor is built on the principle of the magneto-strictive effect in which changes in magnetic permeability due to deformation of a ferromagnetic material is measured in a non-destructive manner, which then can be translated into the absolute values of stresses existing on the surface of the material. This technique was applied to measure stresses of H-beams, used as tunnel support structures, to confirm expected measurement accuracy with reading error of about 10 to 20MPa, which was confirmed by monitoring strains released during cutting tests The results show that this method could be one of the promising technologies for non-destructive stress measurement for safe construction and maintenance of underground rock structures encountered in civil and mining engineering.

• Steel and Composite Structures
• /
• 제16권6호
• /
• pp.611-637
• /
• 2014

A single plate shear connection, or shear tab, is a very popular shear connection due to its merit in ease of construction and material economy. However, problems in understanding the connection behavior, both in terms of strength and ductility, have been well-documented. Suggestions or design model for single plate connections in AISC Design Manual have been altered several times, with the latest edition settling down to giving designers pre-calculated design strength tables if the connection details agree with given configurations. Results from many full-scale tests and finite element models in the past suggest that shear strength of a bolt group in single plate shear connections might be affected by yield strength of plate material; therefore, this research was aimed to investigate and clarify effects of plate yield strength and thickness on shear strength of the bolt group in the connections, including the validity of using a plate thickness/bolt diameter ratio ($t_p/d_b$) in design, by using finite element models. More than 20 models have been created by using ABAQUS program with 19.0- and 22.2-mm A325N bolts and A36 and Gr.50 plates with various thicknesses. Results demonstrated that increase of plate thickness or plate yield strength, with the $t_p/d_b$ ratio remained intact, could significantly reduce shear strength of the bolt group in the connection as much as 15 percent. Results also confirmed that the $t_p/d_b$ ratio is a valid indicator to be used for guaranteeing strength sufficiency. Because the actual ratio recommended by AISC Design Manual is $t_p/d_b$ + 1.6 (mm) for connections with a number of bolts less than six and plate yield strength in construction is normally higher than the nominal value used in design, it is proposed that shear strength of a bolt group in single plate connections with a number of bolts equal or greater than seven be reduced by 15 percent and the $t_p/d_b$ ratio be limited to 0.500.

• 한국터널지하공간학회 논문집
• /
• 제5권1호
• /
• pp.23-31
• /
• 2003

최근 NATM 터널 현장타설 콘크리트 라이닝의 시공성 향상과 균열에 따른 유지관리비 절감을 위해 양질 암반의 배수형 터널 시공에 있어서는 숏크리트만으로 라이닝을 대체하려는 영구지보 개념의 터널시공 (Single-Shell Tunnel, NMT 등)이 세계적으로 증가하고 있는 추세이다. 이러한 영구지보 개념의 터널 시공을 위해서는 고성능 숏크리트의 개발이 선결되어야 하며, 이러한 목적에서 본 논문에서는 조강시멘트와 최근 주목받고 있는 환경친화적인 alkali-free 급결제의 조합을 통해 고성능 숏크리트의 개발 가능성을 확인하였다. 그 결과, 보통시멘트(OPC)를 사용한 숏크리트보다 약 25%의 높은 초기강도를 확보하였으며, 용수부에서도 뛰어난 부착특성을 확인할 수 있었다.

• 한국화재소방학회논문지
• /
• 제25권4호
• /
• pp.22-27
• /
• 2011

건축물의 바닥 하부에 설치되는 비내력 천장이 일정 시간의 내화성능을 확보할 경우 바닥 및 보에 요구되는 내화성능의 감소가 가능하다. 이에 따라 건물시공시 이들 부재에 시공되는 내화피복 절감 및 충전구조 시공 완화 등으로 인하여 공간 구획의 활용성이 증가하여 비교적 경량으로 대규모 공간에 대한 시공이 가능하게 되어 건물 시공 유지관리의 편의성 확보, 공사기간의 단축 및 비용절감과 같은 경제적인 건축생산이 가능하게 된다. 외국에서는 보 바닥 및 천장재를 하나의 복합 시스템으로 구성하여 내화구조로 시공하거나 천장자체의 내화성능을 확보하는 경우가 있으나 국내에서는 이에 대한 연구가 진행되지 않아 건축물의 고층 경량화에 따른 경제적인 효율성을 확보하지 못하고 있는 실정이다. 따라서 국내 건축물에 적용 가능한 내화성능을 확보한 표준화된 비내력 내화천장구조의 개발이 필요하며, 이에 본 연구에서는 현재 일반적인 비내력 천장구조의 내화성능을 평가하여 향후 비내력 내화천장구조의 개발을 위한 기초자료를 제시하였다.

• 한국농촌건축학회논문집
• /
• 제18권4호
• /
• pp.1-8
• /
• 2016

This study is to investigate the meaning and value of Usonian Automatic House System(UAHS) of Frank Lloyd Wright in his later period, focused on materials, methods, and his thoughts. The results of this study are follows. UAHS was the outcome of moderate cost and prefab house which Wright had successively attempted after the early Prairie period. The construction was simple and comparatively cheap, but subsequent automatics were difficult and expensive to build. Nevertheless, it was sufficiently flexible to support a rather wide range of house designs. Concrete was the inert mass and a plastic material. Wright saw a kind of weaving coming out of it. He also saw a kind of concrete masonry, steel for warp and masonry units for woof in the automatic concrete block. The reinforced bars in hollowed joints of concrete block increased the safety factor and affected the expression of the construction through the stabilization they provided. But they did not give concrete block the capability of structural span. Standardization as the soul of the machine might be seen in UAHS. The concrete blocks were more cheap, lighter, and larger hollowed plain than textile blocks in 1920s. But the variety of pattern and different block types in the UAHS were achieved at some sacrifice of standardization. The repetitive nature of production was compromised for artistic goals. The sense of compromise was not maximized, however, because the units as installed looked far more repetitive than they actually were.