1 |
Ashakul, A. and Murray, T.M. (2006b), "New method for designing single plate shear connections (Part II)", EASEC-10 Proceedings, Bangkok, Thailand, August.
|
2 |
Astaneh, A. (1989), "New concepts in design of single plate shear connections", Proceedings of the National Steel Construction Conference, AISC, Nashville, TN, USA, June.
|
3 |
Astaneh, A. and Nader, M.N. (1989), "Design of tee framing shear connections", Eng. J., AISC, First Quarter, 26, 9-20.
|
4 |
Astaneh, A. and Nader, M.N. (1990), "Experimental studies and design of steel tee shear connections", J. Struct. Eng., ASCE, 116(10), 2882-2901.
DOI
|
5 |
Astaneh, A., McMullin, K.M. and Call, S.M. (1988), "Design of single-plate framing connections", Report No. UCB/SEMM-88/12, Department of Civil Engineering, University of California, Berkeley, CA, USA.
|
6 |
Astaneh, A., Call, S.M. and McMullin, K.M. (1989), "Design of single plate shear connections", Eng. J., AISC, First Quarter, 26, 21-32.
|
7 |
Astaneh, A., McMullin, K.M. and Call, S.M. (1993), "Behavior and design of steel single plate shear connections", J. Struct. Eng., ASCE, 119(8), 2421-2440.
DOI
|
8 |
Crawford, F.C. and and Kulak, G.L. (1971), "Eccentrically Loaded bolted Connections", J. Struct. Div., ASCE, 97(3), 765-783.
|
9 |
ABAQUS Manual (2007), ABAQUS/Standard User's Manual Volume I-III, Hibbitt, Karlsson & Sorenson, Inc., Pawtucket, RI, USA.
|
10 |
American Institute of Steel Construction (AISC) (1999), Manual of Steel Construction, Load and Resistance Factor Design, Chicago, IL, USA.
|
11 |
Richard, R.M., Gillett, P.E., Kriegh, J.D. and Lewis, B.A. (1980), "The analysis and design of single plate framing connections", Eng. J., AISC, Second Quarter, 17, 38-52.
|
12 |
Sarkar, D. (1992), "Design of single plate framing connections", Master of Science Thesis, University of Oklahoma, Norman, OK, USA.
|
13 |
Selamet, S. and Garlock, M.E. (2009), "Modified connection details for single plate steel connections under fire", Structures Congress 2009, Austin, TX, USA, April-May.
|
14 |
Weigand, J. and Berman, J. (2009), "Rotation and strength demands for simple connections to support large vertical deflections", Structures Congress 2009, Austin, TX, USA, April-May.
|
15 |
Yim, H.C. and Krauthammer, T. (2012), "Mechanical properties of single-plate shear connections under monotonic, cyclic, and blast loads", Eng. Struct., 37, 24-35.
DOI
|
16 |
Creech, D. (2005), "Behavior of single plate shear connections with rigid and flexible supports", Master of Science Thesis, North Carolina State University, Raleigh, NC, USA.
|
17 |
Crocker, J.P. and Chambers, J.J. (2004a), "Seismic design considerations for single plate shear connections", Structures Congress 2004, Nashville, Tennessee, USA, May.
|
18 |
Crocker, J.P. and Chambers, J.J. (2004b), "Single plate shear connection response to rotation demands imposed by frames undergoing cyclic lateral displacements", J. Struct. Eng., ASCE, 130(6), 934-941.
DOI
|
19 |
Garlock, M.E. and Selamet, S. (2010), "Modeling and behavior of steel plate connections subject to various fire scenarios", J. Struct. Eng., ASCE, 136(7), 897-906.
DOI
|
20 |
Geschwinder, L.F. and Gustafson, K.D. (2010), "Single-plate shear connection design to meet structural integrity requirements", Eng. J., Third Quarter, 47(3), 189-196.
|
21 |
Hewitt, C.M. (2008), "Design of conventional- and extended-single-plate connections: AISC's new design procedures", Structures Congress 2008, Vancouver, Canada, April.
|
22 |
Lipson, S.L. (1968), "Single-angle and single-plate beam framing connections", Proceedings of the Canadian Structural Engineering Conference, Toronto, Canada, February.
|
23 |
Oosterhof, S.A. and Driver, R.G. (2012), "Performance of steel shear connections under combined moment, shear, and tension", Structures Congress 2012, Chicago, IL, USA, March.
|
24 |
Marosi, M., D'Aronco, M., Tremblay, R. and Rogers, C.A. (2011), "Multi-row bolted beam to column shear tab connections", Eurosteel 2011, Budapest, Hungary, August-September.
|
25 |
Metzger, K.A.B. (2006), "Experimental verification of a new single plate shear connection design model", Master of Science in Civil Engineering Thesis, Virginia Polytechnic Institute and State University, Blacksburg, VA, USA.
|
26 |
Muir, L.S. and Hewitt, C.M. (2009), "Design of unstiffened extended single-plate shear connections", Eng. J., AISC, Second Quarter, 46(2), 67-79.
|
27 |
Rex, C.O. and Easterling, W.S. (2003), "Behavior and modeling of a bolt bearing on a single plate", J. Struct. Eng., ASCE, 129(6), 792-800.
DOI
ScienceOn
|
28 |
American Institute of Steel Construction (AISC) (2002), Steel Design Guide 17 High Strength Bolts: A Primer for Structural Engineers, Chicago, IL, USA.
|
29 |
American Institute of Steel Construction (AISC) (2005), Steel Construction Manual, Chicago, IL, USA.
|
30 |
American Institute of Steel Construction (AISC) (2010), Steel Construction Manual, Chicago, IL, USA.
|
31 |
Ashakul, A. (2004), "Finite element analysis of single plate shear connections", Ph.D. Dissertation, Virginia Polytechnic Institute and State University, Blacksburg, VA, USA.
|
32 |
Ashakul, A. and Murray, T.M. (2006a), "New method for designing single plate shear connections (Part I)", EASEC-10 Proceedings, Bangkok, Thailand, August.
|
33 |
American Institute of Steel Construction (AISC) (2001), Manual of Steel Construction, Load and Resistance Factor Design, Chicago, IL, USA.
|
34 |
Khampa, K. (2010), "Finite element analysis of effects of plate properties on shear strength of single plate connections", Master of Engineering Thesis, King Mongkut's University of Thonburi, Bangkok.
|
35 |
ASTM (2008), Standard Specification for Carbon Structural Steel, American Society for Testings and Materials, PA, USA.
|