• 한국안전학회지
• /
• 제24권4호
• /
• pp.82-89
• /
• 2009

Unlike concrete bridge, steel bridge resists external force by forming thin plate. Thus, because steel girder bridge has big slenderness ratio, buckling is a major design factor. Plate girder consists of flange and web plate. Because of economic views, web plate that resists shear forces is made by more thinner plate. Thus, web plate has much risk for buckling. The objective of this study is to analyze the buckling behaviors of plate girder and to present the proper reinforcement location of longitudinal stiffeners. Various parametric study according to the change of web height, transverse stiffeners and load condition are examined.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.1300-1309
• /
• 2010

In the railway bridges, steel plate girder types are preferred due the high stability. Nevertheless, it has been pointed out that this type of bridge has problems such as, structural damages in the rail and girder seat, noise problem due to impact at the rail joint and excessive vibration. This vibration and/or deflection are mainly because insufficient stiffness of steel plate type of bridge. To resolve these problems, PC-Slab composite plate girder type which has simple process and economic cost, is proposed in this study. The static and dynamic experiment is performed by using the production of actual sized PC-Slab and abandoned steel plate girder. The object of this experiment is to verify the fact that girder stiffness increase and structural safety. The result of the experiment is used to analyze the effect of performance improvement of PC composite plate girder type. Using this method, economic rail maintainers, girder stiffness increase, and also speed/ride improvement even for existing rail could be expected by dynamic performance improvement. Additionally noise due to impact, deflection and vibration caused from long rails can be reduced.

• 대한토목학회논문집
• /
• 제30권5A호
• /
• pp.407-415
• /
• 2010

현재 국내에서 설계되고 있는 40~70 m 지간의 강도로교 90% 이상이 박스거더교 형식이며 박스거더교는 휨 강성과 비틀림 강성이 뛰어나 장경간이나 곡선을 갖는 교량 형식으로 적합할 뿐만 아니라 가설현장에서의 작업을 최소화 할 수 있어 현장 안전관리 면에서도 유리한 구조형식이다. 그러나 박스거더는 상하 플랜지와 복부판이 수직, 수평보강재로 보강되는 구조로 부재량과 용접량이 많이 소요되어 비경제적인 교량 형식으로 많이 지적되어 왔다. 따라서, 미국이나 일본에서는 상대적으로 부부재를 줄일 수 있는 보다 경제적인 플레이트거더교가 일반적으로 적용되고 있다. 이러한 플레이트거더교의 한 형식인 소수주거더교는 강합성교량의 합리화를 위해 많이 채용되는 형식으로, 주거더 간격을 종래의 3 m 정도에서 2배 정도인 6 m 이상으로 증가하여 주거더의 개수를 최소화시키는 경제적인 교량형식이다. 또한, 거더 단면의 단순화를 위하여 거더의 복부판에 부착되는 수평보강재와 수직보강재를 최대한 생략할 수 있다. 2주거더교는 소수주거더교의 대표적인 형식으로, 유효폭 10 m 전후의 교량에 적합하여 프랑스를 중심으로 유럽에서는 1960년대부터 본격적으로 개발되어왔다. 국내에서는 소수주거더교 적용시 안전율 확보를 위해 유럽이나 일본 등에 비해 많은 강재량을 사용하고 있으며, 설계자들의 친밀도 부족과 박스거더교에 비해 복잡한 설계 등과 같은 여러가지 실무적용 차원에서 적용이 제한되고 있는 실정이다. 이 연구에서는 합리화 강교량 형식인 소수주거더교의 제작방법을 개선하고 구속콘크리트를 활용하여 강교량에서 공사비와 직결되는 강중을 줄일 수 있는 신형식 강합성거더(Turn Over Composite Girder) 구조형식을 제안하고자 한다. 또한 실물 크기인 20 m 단면회전방법을 적용한 강합성 거더시험체 및 교량시험체를 제작하여 제작성을 평가하고 구조성능 실험을 하여 구조안전성을 평가하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 논문집
• /
• pp.365-375
• /
• 2006

The HR Plates made hot rolled coils is lower than general structural steel plates in price. No difference between general steel plates and HR Plates with thickness up to 22mm are found in most characters such as cutting operation, fabrication and even welding. It can be concluded that HR Plates with thickness up to 22mm can be applied to flanges and webs of any girders as well as longitudinal ribs, longitudinal and vertical stiffeners of steel bridges appropriately. To increase the demand of HR Plates with thickness up to 22mm, it is necessary that HR Plates is applicable to full member in steel bridge including main girder.In this study, availabilities of the narrow steel box girder of light railway transit with HR Plate width as a main member are discussed. For application of HR Plate to steel bridge with 50m span or more, new support systems in three types are presented. Computational analysis is performed in 15 bridge models of light railway transit with beam element and plate element. As a analysis results, three models in light railway transit are presented. We finally come to the conclusion that HR Plates can be apply to narrow steel box girder in the light railway transit.

• Structural Engineering and Mechanics
• /
• 제40권5호
• /
• pp.719-743
• /
• 2011

A hybrid damage monitoring scheme using parallel acceleration-impedance approaches is proposed to detect girder damage and support damage in steel plate-girder bridges which are under ambient train-induced excitations. The hybrid scheme consists of three phases: global and local damage monitoring in parallel manner, damage occurrence alarming and local damage identification, and detailed damage estimation. In the first phase, damage occurrence in a structure is globally monitored by changes in vibration features and, at the same moment, damage occurrence in local critical members is monitored by changes in impedance features. In the second phase, the occurrence of damage is alarmed and the type of damage is locally identified by recognizing patterns of vibration and impedance features. In the final phase, the location and severity of the locally identified damage are estimated by using modal strain energy-based damage index methods. The feasibility of the proposed scheme is evaluated on a steel plate-girder bridge model which was experimentally tested under model train-induced excitations. Acceleration responses and electro-mechanical impedance signatures were measured for several damage scenarios of girder damage and support damage.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 춘계학술대회 논문집
• /
• pp.706-711
• /
• 2005

From the using CWR (Continuously Welded Rail) on steel plate girder bridges without ballast, axial forces are occurred from a temperature on CWR and girders. Because of the additional axial forces, studies in order to CWR and developments of devices are proceeding. The track system of steel plate girder bridges is poor. When CWR is used for the system, the resistance on sleepers is increased from a temperature. So it is increasing an effect on CWR and, for solving the effect, longitudinal forces for buckle are being decreased. It is possible that opposite cases can be happened and it is also compared and studied. Therefore, we present a reasonable model for analyzing CWR within the property of steel plate girder railway bridges in Korea. Furthermore, the results analyzed for stability is compared and evaluated with tests. Finally, a reasonable method for the installation of CWR on bridges without ballast is suggested.

• 한국강구조학회 논문집
• /
• 제8권3호통권28호
• /
• pp.117-125
• /
• 1996

The stress patterns of vertical stiffener of plate girder bridge were examined by existing data of actual measurement stress for steel bridges and the structural details of vertical stiffener of plate girder bridge having seeked rationalization and abbreviation were investigated by 1/2 bridge model. As the results, the out-of-plane stress occur in the upper parts of vertical stiffner and fatigue cracks by the action of alternative stress is apt to occur in web plate of lower parts vertical stiffener. Also, the gap between lower parts of vertical stiffner and lower flange of plate girder bridge seeking rationalization and abbreviation is effective to adopt 100mm.

• 한국강구조학회 논문집
• /
• 제17권5호통권78호
• /
• pp.637-648
• /
• 2005

선행하중을 도입한 H형강의 상하부에 고강도 강판을 부착시키고 하중을 제거함으로써 프리스트레스의 도입효과를 극대화 시킨 플레이트거더(High Prestressed Plate Girder, 이하 HiPP 거더)를 개발하고자 한다. 먼저 복합거더(hybrid girder)의 일종인 HiPP 거더의 역학적 원리를 간략히 설명하고, 실험을 통하여 플레이트거더에 의도한 프리스트레스를 도입하기 위한 제작공정을 개발한다. 또한 실험체의 변형률 계측결과와 이론해석 결과를 비교하여 HiPP 거더의 프리스트레스 도입 메카니즘을 확인하며, 단계별 거더에 발생하는 응력을 파악한다. 가교에 적용하기 위하여 HiPP 거더의 설계를 위한 허용휨응력(안)과 용접부의 응력검토 결과를 제시한다. 결론적으로 단순 합성거더와 비교하여 HiPP 거더는 프리스트레스의 도입효과 때문에 장지간화된 가교의 설계/시공을 가능케 하는 구조적 거동 특성을 보인다.

• 한국강구조학회 논문집
• /
• 제12권4호통권47호
• /
• pp.407-416
• /
• 2000

본 연구는 실험적인 방법으로 이동하중을 받는 판형교의 동적 응답을 연구하였다. 판형교의 상부 슬래브는 판요소로, 거더는 보요소로 이상화였다. 이동하중과 판형교는 각각 소규모 차량모델과 교량모델로 제작하였다. 이동 하중을 받는 판형교의 동적 응답은 변형계, 변위계, 가속도계 및 변형도 측정기를 이용하여 측정하였고 측정한 자료로부터 얻은 최대동적응답을 유한요소법의 결과와 비교하였다. 실험적인 모형실험으로 판형교의 동적응답을 얻을 수 있음을 알 수 있다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.1439-1449
• /
• 2007

The challenging aspect of CWR (continuous welded rail) is the additional axial forces in rails, mainly due to the thermal expansion of steel plate girder and rail itself. It has been found that these axial forces are proportional to girder length, total bridge length and bolt tightening forces. Also these forces are dependent to girder support conditions, types of bearings and their arrangements. With CWR, the authors' previous studies show that performance improvements like noise reduce, fatigue resistances and bearing durability increment can be expected. In addition to these effects, secondary effects due to the semi integral behavior between rail and bridge girder also can be expected. Special bearings which can reduce the absolute maximum axial forces have been developed, and applied to real 100m span bridge. The performance improvements were verified through site measurements and numerical analysis. The purpose of this study is to confirm the expected performance improvement aspects of steel plate girder bridges with CWR. To verify these aspects, girder stiffness changes, rail axial force changes, girder displacements and noise level were thoroughly measured and compared.