• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 춘계학술대회논문집 - 한국공작기계학회
• /
• pp.435-440
• /
• 2000

In this study, we aims to develop the machining technology for the ultra precision surface and profile accuracy. For this purpose, we construct the electrolytic in process grinding system (ELID grinding) and apply to the cylindrical and internal grinding. Through the various machining experiments such as SCM steel., ceramics, tungsten carbide etc., we have obtained nanometer surface roughness. And we have applied this mirror grinding technique to hydraulic manual valve and mold core of mini disk optical pick-up base. For the development of fine mechanical part machining technology, e have made multi fiber optical connector using fine grinding technology. And constructed micro drilling system with process monitoring system which is possible to drill 50${\mu}{\textrm}{m}$ diameter hole.

• 한국전기전자재료학회논문지
• /
• 제19권3호
• /
• pp.287-291
• /
• 2006

This paper describes mechanical and electric properties of ACSR $410\;mm^2$ conductor from many of older overhead conductor. Samples of conductors itemized two division according to operation sector, green area, salt and pollution area. Samples of conductors operated various environment conditions have undergone laboratory metallurigical investigation and tensile strength torsional ductility and electrical performance. The steel core were found to have retained their original properties to a large degree in both tensile strength and the number of turns to failure. On the other hand the aluminum conductor showed reductions in tensile strength. To determine the remaining useful life of aged conductor, an unacceptable deterioration level has to established for each diagnostic procedure.

• 한국정밀공학회지
• /
• 제22권2호
• /
• pp.172-179
• /
• 2005

A high-precision centerless grinding machine has been recognized as a core equipment performing the finish outer-diameter grinding process of ferrules which are widely used as fiber optic connectors. In this study, in order to realize the high-precision centerless grinding machine, the structural characteristic analysis and evaluation are carried out on the virtual prototype consisted of the steel bed, hydrostatic GW and RW spindle systems, hydrostatic RW feed mechanism, RW swivel mechanism, and on-machine GW and RW dressers. The loop stiffnesses of centerless grinding machine are estimated based on the relative deformations between GW and RW caused by the grinding forces. And the simulated results illustrate that the concrete-filled bed has the considerable effect on the improvement of the structural stiffness of centerless grinding machine.

• 대한기계학회논문집A
• /
• 제31권5호
• /
• pp.594-600
• /
• 2007

Rapid mold heating has been recent issue to enable the injection molding of thin-walled parts or micro/nano structures. Induction heating is an efficient way to heat a conductive workpiece by means of high-frequency electric current caused by electromagnetic induction. Because the induction heating is a convenient and efficient way of indirect heating, it has various applications such as heat treatment, brazing, welding, melting, and mold heating. The present study covers an experimental investigation on the rapid heating using the induction heating and rapid cooling using a vortex tube in order to eliminate an excessive cycle time increase. Experiments are performed in the case of a steel cup mold core with various heating and cooling conditions. Temperature is measured during heating and cooling time, from which appropriate mold heating and cooling conditions can be obtained.

• 한국가시화정보학회지
• /
• 제4권2호
• /
• pp.3-5
• /
• 2006

Recently, the next-generation advanced flow visualization techniques such as holographic PIV, aynni.c PIV, echo-PIV, micro/nano-PIV, and X-ray PIV have been introduced. These advanced mea-surement techniques have a big potential as the core technology for analyzing outmost thermo-fluid flows in future. They would be indispensable in solving complicated thermo-fluid flow problems not only in industrial fields such as automotive, space, electronics, aero- and hydro-dynamics. steel, and information engineering, but also in the research fields of medical science, bio-medical engineering, environmental and energy technology etc. Especially, NT (Nano Technology) and BT (Bio Technology) strongly demand these advanced measurement techniques, because it is impossible for conventional measurement methods to observe the nano- and bio-fluidic flow phenomena. In this article, the basic principle of these high-tech flow visualization techniques and their practical applications which cannot be resolved by conventional methods, such as blood flows in a micro-tube, in vivo analysis of micro-circulation, and flow around a living body are introduced as a blue ocean strategy.

• KIEE International Transactions on Power Engineering
• /
• 제2A권4호
• /
• pp.153-159
• /
• 2002

Power transformer protective relay should block the tripping during magnetizing inrush and rapidly operate the tripping during internal faults. Recently, the frequency environment of power system has been made more complicated and the quantity of 2nd frequency component in inrush state has been decreased because of the improvement of core steel. And then, traditional approaches will likely be maloperate in the case of magnetizing inrush with low second harmonic component and internal faults with high second harmonic component. This paper proposes a new relaying algorithm to enhance the fault detection sensitivities of conventional techniques by using a fuzzy logic approach. The proposed fuzzy based relaying algorithm consists of flux-differential current derivative curve, harmonic restraint, and percentage differential characteristic curve. The proposed relaying was tested with relaying signals obtained from EMTP simulation package and showed a fast and accurate trip operation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.801-802
• /
• 2006

본 논문은 기존의 전기강판 재질을 이용한 모터가 아닌 SMC 재질을 이용한 모터 성형 시 발생 될 수 있는 문제점이 모터의 자기적 특성에 미치는 영향에 대해 분석 하였다. 기존의 전기 강판 재질 모터에서 밀도는 전 영역에서 고른 분포를 갖는 반면에, SMC를 이용한 모터는 위치와 형상에 따라 다른 밀도와 응력 분포를 지닌다. 따라서 본 논문에서는 이러한 SMC 재질을 이용한 모터의 특성이 전기적 에너지 변환 과정에 미치는 영향에 대해서 분석 하기위해, 고속모터(30000rpm)급 모터에서 silicon steel 재질 모터와 SMC 재질모터를 비교 하였다. 비교결과 SMC 재질 모터의 경우 밀도 편차가 5.8%이상 발생되었으며 이는 전기적 특성에 10%이상 영향을 미치는 것으로 나타났다. 특히 고속모터의 경우 자속 포화가 심해 일정하게 높은 밑도 특성이 요구 되는 것으로 파악 되었으며, 향후 이 방법은 SMC 재질을 이용한 모터 설계에 유용하게 이용 될 수 있을 것으로 판단된다.

• 한국철도학회논문집
• /
• 제6권3호
• /
• pp.194-202
• /
• 2003

To make railway carbody light in weight has advantages at some aspects of both manufacturing and maintenance. Recently, railway carbodys of steel structure have been lightened their weight by using aluminum extrusion plate. for the additional lightening of railway carbody, an optimal design which maintains proper strength and minimizes weight must be achieved. Optimization which is used with finite element analysis for aluminum extrusion plate has the disadvantage of consuming much time. In this paper, the method of equivalent material property which is available to FEA code is established using the method of equivalent stiffness. This method for plate is expanded into the method for railway carbody structure with plates and shells. An objective function is established for maximum stiffness of unit aluminum extrusion plate using established method of equivalent material property. We performed an multi-objective optimization using the penalty function method. As a result, recommendable shapes and sizes of unit extrusion plate for under-frame of high speed train is presented.

• 제어로봇시스템학회논문지
• /
• 제17권4호
• /
• pp.304-312
• /
• 2011

In an oligopolistic market, only a few firms account for most or all of total production, e.g., automobile, steel, and computer industries. For a dynamic oligopolistic market with two firms competing in quantities, we show that supervisory control theory of discrete event systems provides a novel approach to solve the dynamic oligopoly problem with the aim of maximizing the profits of both firms. Specifically, we show that the controllability, observability, and nonblocking property (which are the core concepts in supervisory control theory) are the necessary and sufficient conditions for two oligopolistic firms in disequilibrium to eventually reach equilibrium states of maximizing the profits of both firms.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 전력전자학술대회 논문집
• /
• pp.623-626
• /
• 2001

The neon transformer consists of magnetic circuit and leakage transformer. Since the silicon steel plate is used build a core, the system is big and heavy. Thus it is difficult to install Neon Sign it is even very dangerous if the system experiences a damage when it is installed inside. To overcome these problems, power electronic circuits are applied. The Inverter type Neon transformer using MOSFET is designed and implemented. The experimental results are described.