• 제목/요약/키워드: Steam iron

검색결과 52건 처리시간 0.027초

Improving Accident Tolerance of Nuclear Fuel with Coated Mo-alloy Cladding

  • Cheng, Bo;Kim, Young-Jin;Chou, Peter
    • Nuclear Engineering and Technology
    • /
    • 제48권1호
    • /
    • pp.16-25
    • /
    • 2016
  • In severe loss of coolant accidents (LOCA), similar to those experienced at Fukushima Daiichi and Three Mile Island Unit 1, the zirconiumalloy fuel claddingmaterials are rapidlyheateddue to nuclear decay heating and rapid exothermic oxidation of zirconium with steam. This heating causes the cladding to rapidly react with steam, lose strength, burst or collapse, and generate large quantities of hydrogen gas. Although maintaining core cooling remains the highest priority in accident management, an accident tolerant fuel (ATF) design may extend coping and recovery time for operators to restore emergency power, and cooling, and achieve safe shutdown. An ATF is required to possess high resistance to steam oxidation to reduce hydrogen generation and sufficient mechanical strength to maintain fuel rod integrity and core coolability. The initiative undertaken by Electric Power Research Institute (EPRI) is to demonstrate the feasibility of developing an ATF cladding with capability to maintain its integrity in $1,200-1,500^{\circ}C$ steam for at least 24 hours. This ATF cladding utilizes thin-walled Mo-alloys coated with oxidation-resistant surface layers. The basic design consists of a thin-walled Mo alloy structural tube with a metallurgically bonded, oxidation-resistant outer layer. Two options are being investigated: a commercially available iron, chromium, and aluminum alloy with excellent high temperature oxidation resistance, and a Zr alloy with demonstratedcorrosionresistance.Asthese composite claddings will incorporate either no Zr, or thin Zr outer layers, hydrogen generation under severe LOCA conditions will be greatly reduced. Key technical challenges and uncertainties specific to Moalloy fuel cladding include: economic core design, industrial scale fabricability, radiation embrittlement, and corrosion and oxidation resistance during normal operation, transients, and severe accidents. Progress in each aspect has been made and key results are discussed in this document. In addition to assisting plants in meeting Light Water Reactor (LWR) challenges, accident-tolerant Mo-based cladding technologies are expected to be applicable for use in high-temperature helium and molten salt reactor designs, as well as nonnuclear high temperature applications.

증기양생이 고로슬래그 콘크리트의 압축강도에 미치는 영향 (Effect of Steam Curing on Compressive Strength of Slag Binder Concrete)

  • 임병훈
    • 한국산학기술학회논문지
    • /
    • 제18권8호
    • /
    • pp.338-343
    • /
    • 2017
  • 본 논문은 이산화탄소 배출저감 및 산업폐기물을 재활용하기 위한 일환으로 산업부산물인 고로슬래그 미분말을 사용하였다. 고로슬래그 미분말은 선철의 제련 시 부산물로서 발생하는 고온 용융상태의 고로슬래그를 물로 급냉 시켜 유리화한 것으로 반응성이 높아 시멘트 및 콘크리트용 혼화재료로 다양하게 사용되고 있다. 고로슬래그 미분말을 치환한 콘크리트는 수화발열속도 저감, 온도상승 억제, 장기강도 향상, 수밀성 증대에 의한 내구성 향상 및 염화물 이온 침투억제에 의한 철근의 발청 억제 등의 다양한 효과를 기대할 수 있다. 그러나, 재령 초기 낮은 압축강도로 인해 사용량이 적은 실정이다. 따라서, 본 연구에서는 고로슬래그 미분말을 치환할 경우 낮은 압축강도를 보완하기 위해 증기양생이 초기 강도 발현에 미치는 영향을 평가하였고, 압축강도, SEM, EDS, XRD와의 관계를 분석하여 콘크리트의 압축강도 발현특성을 검토하였다. 그 결과 고로슬래그 미분말을 30% 치환한 콘크리트가 가장 우수하였으며, 이는 증기양생에 의해 고로슬래그 미분말의 피막을 파괴하여 ettringite 및 C-S-H겔 등의 수화물을 생성함으로 압축강도에 영향을 마친 것으로 판단된다.

Long-Term Stability for Co-Electrolysis of CO2/Steam Assisted by Catalyst-Infiltrated Solid Oxide Cells

  • Jeong, Hyeon-Ye;Yoon, Kyung Joong;Lee, Jong-Ho;Chung, Yong-Chae;Hong, Jongsup
    • 한국세라믹학회지
    • /
    • 제55권1호
    • /
    • pp.50-54
    • /
    • 2018
  • This study investigated the long-term durability of catalyst(Pd or Fe)-infiltrated solid oxide cells for $CO_2$/steam co-electrolysis. Fuel-electrode supported solid oxide cells with dimensions of $5{\times}5cm^2$ were fabricated, and palladium or iron was subsequently introduced via wet infiltration (as a form of PdO or FeO solution). The metallic catalysts were employed in the fuel-electrode to promote $CO_2$ reduction via reverse water gas shift reactions. The metal-precursor particles were well-dispersed on the fuel-electrode substrate, which formed a bimetallic alloy with Ni embedded on the substrate during high-temperature reduction processes. These planar cells were tested using a mixture of $H_2O$ and $CO_2$ to measure the electrochemical and gas-production stabilities during 350 h of co-electrolysis operations. The results confirmed that compared to the Fe-infiltrated cell, the Pd-infiltrated cell had higher stabilities for both electrochemical reactions and gas-production given its resistance to carbon deposition.

펜톤 반응을 이용한 원전 증기발생기 화학세정 폐액의 고농도 Fe(III)-EDTA 분해 (Fenton Degradation of Highly Concentrated Fe(III)-EDTA in the Liquid Waste Produced by Chemical Cleaning of Nuclear Power Plant Steam Generators)

  • 조진오;목영선;김석태;정우태;강덕원;이병호;김진길
    • 공업화학
    • /
    • 제17권5호
    • /
    • pp.552-556
    • /
    • 2006
  • 본 연구에서는 70000 mg/L 가량의 고농도 철(III)-에틸렌디아민테트라아세트산(Fe(III)-EDTA)을 함유하고 있는 원전 증기발생기 화학 세정 폐액의 처리를 위해 펜톤 반응을 사용하였다. Fe(III)-EDTA 분해실험은 모사 폐액 뿐 아니라 실제 폐액을 가지고도 수행되었다. 폐액에 주입된 과산화수소의 양과 폐액의 pH가 Fe(III)-EDTA 분해에 미치는 영향이 정량적으로 평가되었고, 다양한 측면에서 고찰되었다. 분해효율이 최대가 되는 최적의 pH는 폐액에 주입된 과산화수소의 양에 의존하였다. 즉, 폐액에 주입된 과산화수소의 양이 다를 때 최대 분해효율이 얻어지는 pH가 달랐다. Fe(III)-EDTA의 분해를 위한 적정 조건은 폐액의 초기 pH가 9이고 과산화수소 주입량이 24.7 mol ($H_{2}O_{2}$)/mol (Fe(III)-EDTA)일 때였다.

증기발생기 2차측 제철화학세정액의 고온적용 (High Temperature Application of Iron Removal Chemical Cleaning Solvent in the Secondary Side of Nuclear Steam Generators)

  • 허도행;이은희;정한섭;김우철
    • Nuclear Engineering and Technology
    • /
    • 제26권1호
    • /
    • pp.140-148
    • /
    • 1994
  • 원전 증기발생기 2차측 제철 화학세정을 기존의 93$^{\circ}C$ 표준공정보다 고온인 1$25^{\circ}C$에서 검증시험을 수행하였다. 원전 증기발생기를 1$25^{\circ}C$에서 화학 세정한다는 가정아래 현장세정 조건을 결정하고 이를 다시 모사하여 3l 용량의 소형 검증시험 조건을 결정하였다. 1 gallon 용량의 316 스텐레스강 압력용기를 반응용기로 사용하는 화학세정 시험장치에서 검증시험을 수행하여 스러지 용해거동, 모재 부식률, 세정제 화학조성 변화거동 등을 측정하였다. 1$25^{\circ}C$ 검증시험 결과에서 93$^{\circ}C$ 표준공정보다 세정시간을 절반이하로 단축시키고도 더 효율적인 세정효과를 얻을 수 있을 뿐만이 아니라 2차측 모재의 부식률도 감소함을 확인할 수 있었다. 그러나 고온 세정공정은 아직 현장적용 경험이 없고, 별도의 외부순환 세정 장치를 이용하는 93$^{\circ}C$ 표준공정과는 달리 주냉각재의 잠열로 2차측을 가열하므로 세정이 완료될 때까지 주냉각 펌프를 계속 가동하여야 하는 단점이 있다. 가동중인 증기발생기에 대한 화학세정을 수행할 때 93$^{\circ}C$ 표준공정과 고온공정의 장 단점을 신중히 검토하여 최적공정을 적용하여야 할 것이다.

  • PDF

Fischer-Tropsch 觸媒試驗裝置의 試作 (Setting-Up of a Fischer-Tropsch Catalyst Testing Apparatus)

  • 이재성;고광국
    • 대한화학회지
    • /
    • 제5권1호
    • /
    • pp.66-72
    • /
    • 1961
  • A small size Fischer-Tropsch Catalyst testing apparatus, designed for an operating pressure of 150 psig, was test fabricated from ordinary schedule 40 iron pipes. The operability of the apparatus was tested by charging the reactor tube with the Lurgi Fischer-Tropsch iron Catalyst and passing through it the water gas obtained by gasifying the Korean anthracite using steam and oxygen. With the kind of catalyst charged, the apparatus was proven to daily produce about 50c.c. of synthetic greasy product, water and water soluble compounds, by running at a temperature of $250^{\circ}C$ and at a space velocity of 180 volume of gas per volume of catalyst/hr. About 20 consecutive days of operation is claimed to be sufficient for gathering an enough amount of synthetic products for such ordinary tests as distillation analysis, density measurement, iodine value determination etc. This trial fabrication of apparatus may be the first case of its kind in Korea in that the work has been conducted out in much a pilot plant scheme rather than a routine laboratory way which depends on small glass ware apparatus.

  • PDF

발전소 급수계통 부식생성물 농도 측정에 관한 연구 (Study on The Measurement of Corrosion Product Concentration in The Feed Water System of A Power Plant)

  • 문전수;이재근
    • Corrosion Science and Technology
    • /
    • 제10권4호
    • /
    • pp.151-155
    • /
    • 2011
  • The iron oxide particles could be resulted from the corrosion of the circulating water system of a power plant. Because it may be one of the trouble materials which affect the power generation efficiency due to the deposition on steam generator tube and turbine blade, the continuous observation of its concentration is very important. The laser induced break-down detection (LIBD) technology was applied to monitor continuously the concentration of corrosion products with the detection limit of ppb level. The measurement system consists of a Nd:YAG pulsed laser, a polarizing beam splitter, a flow-type sample cell, an acoustic emission sensor, a high speed data acquisition board, a personal computer, etc.. The performance test results confirmed that this technology can be effective to monitor the corrosion product concentration of the circulating water system of a power plant.

지속가능 에너지 패러다임 변화속에서 석탄의 활용 (Usage of Coal in the Paradigm Shift toward Sustainable Energy)

  • 박제현;양인재;이진수;이청룡
    • 자원환경지질
    • /
    • 제53권6호
    • /
    • pp.793-807
    • /
    • 2020
  • 그린뉴딜정책의 실현은 석탄을 연료에서 원료로 활용분야로의 전환을 촉진시킬 것이다. 석탄은 수소의 생산, 인조 흑연 및 활성탄의 제조 원료로 활용될 수 있다. 석탄은 Steam carbon(SC) 반응과 Water-Gas Shift(WGS) 반응 및 탄산화 반응을 통하여 수소를 생산할 수 있으며, CO2격리기술과 연동되어 사용되어야 한다. 인조흑연은 실리콘이나 철 등의 무기촉매의 존재하에서 탄화도가 높은 무연탄 등을 2400~2800℃의 흑연화 온도까지 열처리함으로서 제조될 수 있기 때문에 무연탄은 석유계 피치에 비해 원료 가격경쟁력 측면에서 잠재성이 있다. 한편, 최근 목질기원의 활성탄에 필적하는 넓은 비표면적 혹은 많은 양의 미세기공을 가진 석탄기원의 활성탄이 제조될 수 있음을 여러 연구를 통해 확인되었다. 따라서 석탄기원의 활성탄은 목질기원의 활성탄을 대체할 수 있을 것으로 기대된다.

탈산소제 차단 수처리에 의한 배열회수보일러 저압증기발생기 연결배관내의 유동가속부식 저감 (Reduction of the Flow Accelerated Corrosion within Low Pressure Evaporator Connection Pipe by Interception of Hydrazine for Water Treatment)

  • 손병관;이재헌
    • 플랜트 저널
    • /
    • 제9권4호
    • /
    • pp.26-30
    • /
    • 2013
  • 유동가속부식에 의해 배관이 파손된 500 MW급 A 복합발전소 배열회수보일러 저압증기발생기 배관을 모델로 삼아 배관급수 내의 용존산소 부족이 유동가속부식의 주요 원인임을 도출하고 용존산소를 증가시키기 위해 적용된 하이드라이진 차단 수처리에 대한 적용효과를 분석하였다. 수처리 적용 1년 후 급수의 용존산소는 0.15 ppb에서 3~5 ppb로 상승되고, 산화환원전위도 -245 mV에서 170 mV로 산화성으로 상승되었다. 또한 유동가속부식에 의한 부식생성물인 철분함유량은 18.5 ppb에서 5~7 ppb로 감소되었다. 따라서 하이드라이진 차단 수처리로 급수의 용존산소가 증가되며 유동가속부식에 의한 배관의 부식생성물인 철분함유량이 감소됨을 확인하였다.

  • PDF

은 나노입자가 분산된 Honeycomb-patterned 수지 합성에 대한 연구 (Study on Synthesis of Honeycomb-patterned Resin Dispersed Silver Nanoparticles)

  • 이동창;이종집
    • 한국산학기술학회논문지
    • /
    • 제18권2호
    • /
    • pp.711-718
    • /
    • 2017
  • Poly(N-vinylcarbazole) (PVK)-cellulose triacetate (CTA) 복합체를 합성하고, 필름에 기공을 형성시킨 뒤, 화학적 환원법을 통해 은 나노입자를 부착하는 것을 연구하였다. PVK-CTA 복합체는 CTA-chloroform 용액에서 iron(III) chloride를 산화제로 사용하여 N-vinylcarbazole을 중합시켜 복합체를 합성하였고, 얻어진 복합체를 습한 환경에서 휘발성용매로 적셔 수증기를 적용하여 macropore가 균일하게 형성된 구조인 Honeycomb-pattern을 형성시켰다. 이후 환원제로 Tetrathiafulvalene (TTF)와 분산제로 polyvinylpyrrolidone (PVP)를 사용하여 화학적 환원법을 이용해 은 나노입자를 Honeycomb-pattern이 형성된 복합체 표면에 부착시켰다. FT-IR과 UV-Vis spectrometer을 이용하여 복합체의 형성여부를 확인하였고, N-vinylcarbazole의 함량을 달리하여 중합한 뒤 복합체의 열 분해도를 측정하였다. Scanning electron microscope (SEM)을 통해 복합체 표면에 형성된 기공의 균일도와 부착된 은 나노입자들의 분산성을 분석하였으며, 환원제, 분산제, 전구체 용액의 농도를 달리하여 은나노입자의 분산성을 확인하였다.