• 산업기술연구
• /
• 제23권A호
• /
• pp.15-20
• /
• 2003

Stochastic simulation technique has advantages over deterministic simulation in various engineering analysis, since stochastic simulation can take into consideration of scattering of various design variables, which is inherent characteristics of physical world. In this work, Monte-Carlo simulation mothod in ADAMS/Insight for steady-state cornering and J-turn behavior of a truck with design variables like hard points and busing stiffnesses have performed to achieve better dynamic performance. The main purpose is to improve understeer gradient at steady-state cornering and minimize peak lateral acceleration and peak yaw rate at J-turn. Through correlation analysis, design variables that have high impacts on the cornering behavior were selected, and significant performance improvement has been achieved by appropriately changing the high impact design variables.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제9권6호
• /
• pp.693-704
• /
• 2017

Blended-Wing-Body Underwater Glider (BWBUG), which has excellent hydrodynamic performance, is a new kind of underwater glider in recent years. In the shape optimization of BWBUG, the lift to drag ratio is often used as the optimization target. However this results in lose of internal space. In this paper, the energy reserve is defined as the direct proportional function of the internal space of BWBUG. A motion model, which relates gliding range to steady gliding motion parameters as well as energy consumption, is established by analyzing the steady-state gliding motion. The maximum gliding range is used as the optimization target instead of the lift to drag ratio to optimizing the shape of BWBUG. The result of optimization shows that the maximum gliding range of initial design is increased by 32.1% though an Efficient Global Optimization (EGO) process.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 A
• /
• pp.8-9
• /
• 2006

This paper presents a new methodology to calculate an optimal solution of equilibrium to power system differential algebraic equations. It employs a nonlinear interior point method for solving the optimization formulation, which includes dynamic equations representing two-axis synchronous generator models with AVR and speed governing control, algebraic equations, and steady-state nonlinear loads. Equilibrium optimization (EOPT) is useful for diverse purposes in power system analysis and control with consideration of the system frequency constraint.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제10권2호
• /
• pp.128-133
• /
• 2010

This paper presents a method for estimating the parameters of dynamic models for induction motor dominating loads. Using particle swarm optimization, the method finds the adequate set of parameters that best fit the sampling data from the measurement for a period of time, minimizing the error of the outputs, active and reactive power demands and satisfying the steady-state error criterion.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제49권3호
• /
• pp.133-144
• /
• 2000

Genetic Algorithm(GA) has been known as a method of solving large-scaled optimization problems with complex constraints in various applications. Since a major drawback of the GA is that it needs a long computation time, the hardware implementations of Genetic Algorithm Processors(GAP) are focused on in recent studies. In this paper, a hardware-oriented GA was proposed in order to save the hardware resources and to reduce the execution time of GAP. Based on steady-state model among continuos generation model, the proposed GA used modified tournament selection, as well as special survival condition, with replaced whenever the offspring's fitness is better than worse-fit parent's. The proposed algorithm shows more than 30% in convergence speed over the conventional algorithm in simulation. Finally, by employing the efficient pipeline parallelization and handshaking protocol in proposed GAP, above 30% of the computation speed-up can be achieved over survival-based GA which runs one million crossovers per second (1㎒), when device speed and size of application are taken into account on prototype. It would be used for high speed processing such of central processor of evolvable hardware, robot control and many optimization problems.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제50권7호
• /
• pp.318-324
• /
• 2001

Efficiency optimization of an indirect vector controlled induction motor drive is proposed. The loss models are used in the validation of the fuzzy logic based on-line efficiency optimization control. At steady state, the fuzzy controller adaptively changes the excitation current on the basis of measured input power, until the maximum efficiency point is reached. The pulsating torque, due to flux reduction, has been compensated by an ingenious feedforward scheme. During transient state, rated flux is established to get the best transient response. Through a comprehensive simulation study, the results confirmed the validity of the proposed method.

• 한국생산제조학회지
• /
• 제20권2호
• /
• pp.121-128
• /
• 2011

As high precision industries such as semiconductor, TFT-LCD manufacturing and MEMS continue to grow, the demand for higher DOF precision stages has been increasing. In general, the stages should accommodate a prescribed range of payloads in order to position various precision manufacturing/inspection instruments. Therefore a nonlinear controller using sliding motion is developed, which bears mass perturbation and makes the upper plate of the stage move in 6 DOF. For the application of the nonlinear control, an observer is also developed based on expected noise covariance. To eliminate the steady state error of step response, integral terms are inserted into the state-space model. The linear term of the controller is designed using optimization scheme in which parameters can be weighted according to their physical significance, whereas the nonlinear term of the controller is designed using trial and error method. A comprehensive simulation study proves that the designed controller is robust against mass perturbation and completely eliminates steady state errors.

• 한국항공우주학회지
• /
• 제37권8호
• /
• pp.737-743
• /
• 2009

본 연구는 Tabu Search를 이용하여 LHP의 최적설계를 진행하는 방법과 절차 및 결과를 제시하고자 한다. 최적설계의 목적은 항공기에 탑재된 리튬이온 전지의 작동온도 조건을 만족하면서 LHP의 중량을 최소화시키는 것이다. 전지는 고에너지 밀도의 특성으로 항공기에 장착된 고에너지 레이저의 동력원으로 사용되는 것으로 가정되었다. 해석은 Steady state analysis model에 기초하였으며 메타모델로 근사화하였다. 최적화 결과로 Tabu Search는 유전알고리듬 등 다른 비 구배기반 최적화 방법에 비해 비교적 적은 계산 시간을 소요하면서도 전역해를 보장하였으나 난수에 의해 초기해를 바꾸어 가면서 최적화를 여러 번 시도해야 하는 단점이 있었다. 그리고 최적화 과정을 통해 기 발표된 LHP와 동일한 성능을 가지면서도 경량화된 LHP를 얻을 수 있었다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제24권2호
• /
• pp.50-56
• /
• 2000

This paper presents the design of an optimal state feedback controller for container cranes under some design specifications. To do this, the nonlinear equation of a container crane system is linearized and then augmented to eliminate the steady-state error, and some constraints are derived from the design specifications. Designing the controller involves a constrained optimization problem which classical gradient-based methods have difficulties in handling. Therefore, a real-coding genetic algorithm incorporating the penalty strategy is used. The responses of the proposed control system are compared with those of the unconstrained optimal control system to illustrate the efficiency.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2004년도 가을 학술발표회 논문집
• /
• pp.347-354
• /
• 2004

Using an efficient adjoint variable method, we develop a unified design sensitivity analysis (DSA) method considering both steady state nonlinear heat conduction and geometrical nonlinear elasticity problems. Design sensitivity expressions with respect to thermal conductivity and Young's modulus are derived. Beside the temperature and displacement adjoint equations, another coupled one is defined regarding the obtained adjoint displacement field as the adjoint load in temperature field. The developed DSA method is shown to be very efficient and further extended to a topology design optimization method for the nonlinear weakly coupled thermo-elasticity problems using a density approach.