• 한국터널지하공간학회 논문집
• /
• 제20권1호
• /
• pp.99-118
• /
• 2018

최근 토목구조물의 설계에 있어 한계상태설계법 적용이 세계적인 추세이나, 국내에서는 소수의 구조물에 국한되어 사용되고 있다. 주요 지중구조물인 터널에 대해서는 한계상태설계법의 도입이 근래에 시도되고 있으므로, 최신의 한계상태 설계법에 대한 이해가 반드시 필요하다. 본 연구는 최근 발간된 AASHTO LRFD Road Tunnel Design and Construction Guide Specification (2017)을 토대로 세그먼트 터널라이닝 설계 시 구조물 하중계수, 하중조합 등을 고찰하고 이외에 구조 검토 시 반영되어야 할 다양한 영향인자에 대해 분석하였다. 본 연구에서는 국내에 적용되고 있는 전력구, 지하철 터널 단면을 대상으로 한 세그먼트 라이닝의 구조해석을 통하여, 지반조건과 하중수정계수, 이음부 강성조건 등 다양한 영향인자들이 부재력에 미치는 영향을 분석 평가하였다.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제5권1호
• /
• pp.55-78
• /
• 2001

Given the anisotropic Poisson equation $-{\nabla}{\cdot}{\mathcal{K}}{\nabla}p=f$, one can convert it into a system of two first order PDEs: the Darcy law for the flux $u=-{\mathcal{K}{\nabla}p$ and conservation of mass ${\nabla}{\cdot}u=f$. A very natural mixed finite volume method for this system is to seek the pressure in the nonconforming P1 space and the Darcy velocity in the lowest order Raviart-Thomas space. The equations for these variables are obtained by integrating the two first order systems over the triangular volumes. In this paper we show that such a method is really a standard finite element method with local recovery of the flux in disguise. As a consequence, we compare two approaches in analyzing finite volume methods (FVM) and shed light on the proper way of analyzing non co-volume type of FVM. Numerical results for Dirichlet and Neumann problems are included.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.387-388
• /
• 2006

This article provides a dynamic analysis model for huge marine engine that examined analytically variation effects of frequency response by fitting of transverse stays such as hydraulic type. First, vibration analysis using the three dimensional finite element models for the huge marine engine has performed in order to find out the dynamic characteristics. Second, three dimensional finite elements model for the huge marine engine was modifued so that generate forcing nodes in crosshead part and top bracing nodes in cylinder frame part. Third, a system matrix and output matrix was derived for the general siso(single input single out) state space model. Finally, developed state space model for the three dimensional finite elements model for the huge marine engine without the additional modifying process.

• 한국지능시스템학회논문지
• /
• 제10권5호
• /
• pp.442-448
• /
• 2000

전통적인 동적 시스템의 제어에는 제어대상의 정확한 수학적 모델링이 필요하다. 그러나 동적 시스템의 모델링은 복잡한 상태방정식과 많은 제어파라메터들에 의해 매우 복잡한 계산과정을 필요로 한다. 그러므로, 본 논문에서는 신경회로망을 이용한 동적 시스템의 상태 공간 인식 모델을 제안하였으며, 제안된 신경회로망을 학습시키기 위하여 가우스-뉴턴 방법을 사용하였다. 본 논문에서 제안된 신경회로망 모델은 시소 시스템 인식문제를 컴퓨터 모이실험을 통해 효과적임을 보였다.

• Ocean Systems Engineering
• /
• 제3권1호
• /
• pp.71-77
• /
• 2013

The effective tracking area of ultra short baseline (USBL) systems strongly relates to the safety of autonomous underwater vehicles (AUVs). This problem has not been studied previously. A method for determining the effective tracking area using acoustic theory is proposed. Ray acoustic equations are used to draw rays which ascertain the effective space. The sonar equation is established in order to discover the available range of the USBL system and the background noise level using sonar characteristics. The available range defines a hemisphere like enclosure. The overlap of the effective space with the hemisphere is the effective area for USBL systems tracking AUVs. Lake and sea trials show the proposed method's validity.

• 대한기계학회논문집B
• /
• 제25권2호
• /
• pp.195-201
• /
• 2001

An inverse heat conduction problem(IHCP) arises when unknown heat fluxes and whole temperature field are to be found with temperature measurements of a few points. In this paper, observers are proposed as solution algorithm for the IHCP. A 1-dimensional heat transfer problem is modeled with modal analysis and state space equations. Position of the heat source is estimated through test heat inputs and the autocorrelation among a few of temperature data. The modified Bass-Gura method is used to design a state observer to estimate the intensity of heat source and the whole temperature field of a 1-dimensional body. To verify the reliability of this estimator, analytic solutions obtained from the proposed method are compared.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 춘계학술대회논문집 - 한국공작기계학회
• /
• pp.635-640
• /
• 2000

Thermal deformation of machine tools can be evaluated from the analysis of the whole temperature field. However, it is extremely inefficient and impossible to acquire the whole temperature field by measuring temperatures of every point. So, a temperature estimator, which can estimate the whole temperature field from the temperatures of just a few points, is required. In this paper, 1-dimensional heat transfer problem is modeled with modal analysis and state space equations. and then state observer is designed to estimate the intensity of heat source and the whole temperature field in real-time. The reliability of this estimator is verified by making a comparison between solutions by the proposed method and the exact solutions of examples. The proposed method is applied to the estimation of temperature distribution in a ball screw system.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제8권4호
• /
• pp.264-269
• /
• 2008

In this paper, two neural networks as a material model, which are based on the state-space method, have been proposed. One outputs the rates of inelastic strain and material internal variables whereas the outputs of the other are the next state of the inelastic strain and material internal variables. Both the neural networks were trained using input-output data generated from Chaboche's model and successfully converged. The former neural network could reproduce the original stress-strain curve. The neural network also demonstrated its ability of interpolation by generating untrained curve. It was also found that the neural network can extrapolate in close proximity to the training data.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제51권10호
• /
• pp.595-600
• /
• 2002

This paper presents the analyzed results of dynamic characteristics including steady state characteristics of the boost input type ZVS converter using the active clamp circuit by the state space averaging method. From the results, it can be seen that the converter has the 5th order transfer functions and the stable closed loop characteristic is obtained by using the compensated error amplifier with 2-pole and 1-zero. The validity of all analyzed results are verified by measurement.

• Structural Engineering and Mechanics
• /
• 제59권2호
• /
• pp.227-241
• /
• 2016

A circular plate with constant thickness, finite radius and stiff edge lying on an elastic halfspace is considered. The half-space consists of a soft functionally graded (FGM) layer with arbitrary varying elastic properties and a homogeneous elastic substrate. The plate bends under the action of arbitrary axisymmetric distributed load and response from the elastic half-space. A semi-analytical solution for the problem effective in whole range of geometric (relative layer thickness) and mechanical (elastic properties of coating and substrate, stiffness of the plate) properties is constructed using the bilateral asymptotic method (Aizikovich et al. 2009). Approximated analytical expressions for the contact stresses and deflections of the plate are provided. Numerical results showing the qualitative dependence of the solution from the initial parameters of the problem are obtained with high precision.