• Journal of Power Electronics
• /
• 제14권4호
• /
• pp.778-787
• /
• 2014

This study presents an input filter resonance mitigation method for an AC-DC matrix converter. This method combines the advantages of the one-cycle control strategy and the active damping technique. Unnecessary sensors are removed, and system cost is reduced by employing the grid-side input currents as feedback to damp out LC resonance. A model that includes the proposed method and the input filter is established with consideration of the delay caused by the actual controller. A zero-pole map is employed to analyze model stability and to investigate virtual resistor parameter design principles. Based on a double closed-loop control scheme, the one-cycle control strategy does not require any complex modulation index control. Thus, this strategy can be more easily implemented than traditional space vector-based methods. Experimental results demonstrate the veracity of theoretical analysis and the feasibility of the proposed approach.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2017년도 전력전자학술대회
• /
• pp.272-273
• /
• 2017

계통연계 인버터 시스템은 기존 L 필터보다 낮은 THD를 가지며 저가격의 작은 부피로도 효율적으로 고조파를 저감할 수 있는 LCL 필터를 많이 사용하고 있다. LCL 필터를 가지는 계통연계 인버터의 제어를 위해서는 PI 제어기가 사용되고 있으며 일반적으로 다수의 PI 제어기가 사용되고 있어 많은 제어기 이득을 동시에 설계해야 하는 한계를 지닌다. 본 논문에서는 LCL 필터를 갖는 3상 계통연계 인버터의 상태공간 모델을 이용하여 상태공간에서의 상태 궤환 제어기의 설계기법을 제시한다. 상태 궤환 제어기를 적용함으로서 다수의 PI 제어기 이득을 설계하는 번거로움을 줄일 수 있으며 체계적인 과정으로 제어기가 설계될 수 있다. 제안된 기법의 타당성과 성능이 PSIM 시뮬레이션을 통하여 입증된다.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2018년도 추계학술발표대회
• /
• pp.380-382
• /
• 2018

사이버 물리 시스템의 발달은 네트워크 기반 제어 시스템을 다양한 형태로 진화시키고 있다. 네트워크에서는 전송 지연과 전송 오류에 의해서 다양한 불규칙한 지연이 발생하고 지연에 강인한 제어기 설계가 요구되고 있다. 마코프 프로세서를 따르는 지연을 갖는 제어 시스템에서 제어기를 설계할 때에 많이 사용되는 모델중에 하나가 확장된 상태 벡터를 기반으로 한 마코프 점프 선형 시스템 모델이다. 본 연구에서는 이 모델을 이용하여 리아푸노프 안전성 조건으로부터 유도되는 선형 행렬 부등식의 안정성 조건으로부터 저복잡도를 가지고 제어기를 유도하는 직관적 방법을 제안한다. 제안된 알고리즘은 모의 실험을 통해서 성능을 확인하였으나, 직관적 방법 구조상에서 제한 조건의 수가 자유 변수의 수보다 많은 이유 때문에 성능이 배우 제한적임을 확인하였고, 이를 개선하기 위한 향후 연구가 요청됨을 확인하였다.

• Journal of Power Electronics
• /
• 제13권6호
• /
• pp.991-999
• /
• 2013

In this paper, a fast transient buck converter using hysteresis PWM control is presented. The proposed control method is based on hysteresis control of the capacitor C voltage. This offers a faster transient response to meet the challenges of the power supply requirements for fast dynamic input and load changes. It also provides better stability and solves the compensation problem of the error amplifier in conversional voltage PWM control. Finally, the steady-state and dynamic operation of the proposed control method are analyzed and verified by simulation and experimental results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 A
• /
• pp.261-264
• /
• 1995

A scheme of observer-based MFAC(Model Following Acceleration Control) system is proposed for the DC servo position control system. The proposed system is competed of MFAC, feedback controller, and reduced-order state observer. As the servo motor is controlled by the acceleration command, the total servo system becomes the acceleration control system. Simulation results show that the proposed system have robust properties against parameter variations and external disturbances.

• International Journal of Internet, Broadcasting and Communication
• /
• 제11권2호
• /
• pp.11-18
• /
• 2019

One of the key objectives of control systems is to maintain a system in a specific stable state. To achieve this goal, a variety of control techniques can be used and it is often uses a feedback control method. As known this kind of control methods requires mathematical model of the system. This article presents seesaw unstable system with two propellers which are controlled without use of a mathematical model instead. The goal was to control it using training data. For system control we use a logistic regression technique which is one of machine learning method. We tested our controller on the real model created in our laboratory and the experimental results show that instability of the seesaw system can be fixed at a given angle using the decision boundary estimated from the classification method. The results show that this control method for structural equilibrium can be used with relatively more accuracy of the decision boundary.

• 한국산업융합학회 논문집
• /
• 제23권6_1호
• /
• pp.889-896
• /
• 2020

We describe a new approach to the analyze the control performance of robotic manipulator based on the monitoring system. The structure of monitoring simulator is consist of seven modes such as control state mode, coordinate mode, input/output mode, program mode, parameters mode, and track mode. The applied control algorithme consists of an time varying feed-forward and feedback controller. The proposed scheme is simple in structure, fast in computation, and suitable for real-time implimemtation. Moreover, this scheme does not require any accurate dynamic modeling and values of parameters. Performance of the proposed monitoring system is illustrated by simulation and experiment for robot manipulator with six degrees of freedom.

• 한국해양공학회지
• /
• 제17권5호
• /
• pp.57-65
• /
• 2003

This paper proposes an optimum design method of structural and control systems, using a 2-D truss structure as an example. The structure is subjected to initial static loads and disturbances. For the structure, a FEM model is formed. Using modal transformation, the equation of motion is transformed into modal coordinates, in order to decrease D.O.F. of the FEM model. To suppress the effect of the disturbances, the structure is controlled by an output feedback $H_{\infty}$ controller. The design variables of the combined optimal design of the control-structure systems are the cross sectional areas of truss members. The structural objective function is the structural weight. The control objective function is the $H_{\infty}$ norm, the performance index of control. The second structural objective function is the energy of the response related to the initial state, which is derived from the time integration of the quadratic form of the state in the closed-loop system. In a numerical example, simulations have been perform. Through the consideration of structural weight and $H_{\infty}$ norm, an advantage of the combined optimum design of structural and control systems is shown. Moreover, since the performance index of control is almost nearly optimiz, we can acquire better design of structural strength.

• 전자공학회논문지
• /
• 제50권1호
• /
• pp.246-253
• /
• 2013

본 논문에서는 유동의 안정된 흐름 제어를 위한 유동제어에 대해 다룬다. 전산유체역학 해석을 통해 제공된 대용량의 유동 데이터를 POD 방법을 통하여 축약하고, 제어측면에서 시간 및 주파수 영역에서의 분석에 근거하여 적절한 수준의 저차 모델링한다. 한편, 유동장 표면에 부착된 압력센서로부터 공간상의 유동상태 추정을 위해 신경망 구조를 갖는 유동추정기를 구성하고, 되먹임 유동제어기를 설계함으로써 유동제어루프를 구성한다.

• International Journal of Ocean Engineering and Technology Speciallssue:Selected Papers
• /
• 제6권1호
• /
• pp.60-68
• /
• 2003

This paper proposes an optimum design method of structural and control systems, using a 2-D truss structure as an example. The structure is subjected to initial static loads and disturbances. For the structure, a FEM model is formed. Using modal transformation, the equation of motion is transformed into modal coordinates, in order to decrease D.O.F. of the FEM model. To suppress the effect of the disturbances, the structure is controlled by an output feedback $H_{\infty}$ controller. The design variables of the combined optimal design of the control-structure systems are the cross sectional areas of truss members. The structural objective function is the structural weight. The control objective function is the $H_{\infty}$ norm, the performance index of control. The second structural objective function is the energy of the response related to the initial state, which is derived from the time integration of the quadratic form of the state in the closed-loop system. In a numerical example, simulations have been perform. Through the consideration of structural weight and $H_{\infty}$ norm, an advantage of the combined optimum design of structural and control systems is shown. Moreover, since the performance index of control is almost nearly optimiz, we can acquire better design of structural strength.