본 연구는 3차원 아트리움 공간(일본의 SIVANS 아트리움)내에서 화재 발생시 복사가 고려된 연기의 거동을 알아보기 위해 자체개발한 SMEP(Smoke Movement Estimating Program) Held 모델을 사용하여 수치해석하였다. PISO 알고리즘과 부력항을 포함한 수정 k-$\\varepsilon$ 난류모델을 사용한 SMEP은 연속, 운동, 에너지, 농도 그리고 복사 열 전달 방정식을 풀었으며, 복사 열 전달 방정식의 해석을 위하여 S-N 구분종좌표법을 채택하여 사용하였다. 수치해석 결과 연기의 온도분포는 복사와 대류를 힘께 고려했을 경우가 대류만을 고려했을 경우 보다 실험결과와 근사한 경향을 나타내었다. 이것은 연기속에 포함되어 있는 연소생성을 중 $H_2$O와 $CO_2$ 가스의 복사 영향 때문이며, 따라서 좀더 실제적인 화재해석에 있어서 연기의 복사 영향을 고려하는 것이 필요하다. 또한 연층의 하강 복도는 약 0.l m/s이었으며 피난수준인 바닥 1.5m까지 연층이 도달하는 데에는 56 kW의 Ultra Fast Fire의 경우 약 450초의 시간이 걸렸다.
클러스터링은 주어진 데이터 집합을 균일한 특성을 가지는 몇 개의 그룹으로 묶는 대표적인 비교사 학습 방법 중 하나로 지금까지 다양한 형태의 알고리듬이 개발되어 다양한 응용 분야에서 사용되어 왔다. 이 중 fuzzy c-means (FCM)는 분할 기반의 클러스터링 기법에 속하는 알고리듬으로 1970년대에 정립된 이후 지금까지 사용되고 있는 대표적인 클러스터링 알고리듬 중의 하나이다. 하지만 FCM에는 여러 가지 문제점이 있으며 이를 해결하기 위해 지금까지도 다양한 FCM의 변형이 제안되고 있다. 이 논문에서는 먼저 FCM의 문제점을 살펴보고 이를 해결하기 위해 제안된 방법들을 통해 연구 방향을 제시하고자 한다. FCM의 문제점을 해결하고자 하는 대부분의 FCM 변형은 주어진 문제 영역의 지식을 활용하고 있다. 하지만 이 논문에서는 문제 영역을 한정하지 않고 모든 문제에 적용할 수 있는 일반적인 방안을 제시하는데 초점을 둔다. 제시하는 방안은 앞으로 더 많은 연구가 필요하지만 클러스터링을 연구하고자 하는 이들에게 최근의 연구 동향과 더불어 출발점을 제시할 수 있을 것으로 기대한다.
The analysis of spatial search direction and its concentration through eye movement can produce some useful data in that it enables to know the features of space elements and their effects on one another. The results by analysing the search features and concentration of spatial sections through the eye-tracking in shops in a department store makes it possible to define the followings. First, the features of 'eye's in & out' could be estimated through the division of sections by the characteristics of those shops and the extraction of central point based on the decision of continuative observation. The decision of continuative observations enabled to analyse the frequency of observation data which can be considered to be 'things watched longtime' and the stared points that is equivalent to 'things seen very often', by which the searching characteristics of spatial sections could be estimated. Second, as with the eye's [in], the right shops had 0.6 times more (3.5%) than those left and as with the eye's [out] the left ones had 0.6 times more (3.5%). It indicates that [in, out] of the right and the left shops had the same difference, which lets us know that with starting point of the middle space, [in] and [out] were paid more attention to the right shops and the left shops respectively. Third, as with the searching directions by section, the searching times [2.9 times] from [B] to [A] were than that [2.6 times] from [A] to [B]. It was also found that the left shops had more searching direction toward [C, D] than the right ones and that those searching activities at the left shops were more active. Fourth, when the searching directions by section are reviewed, the frequency of searching from [B] to [A] was 2.9 and that of the other way 2.6. Also the left shops were found to have more searching direction toward [C, D] than the right ones and those searching activities at the left shops were estimated to be more active.
본 논문은 자동 음소 분할기의 음소 경계 오류를 보상하기 위한 후처리(Postprocessing)에 관한 연구이다. 자동 분절 경계의 오류 범위를 줄일 수 있는 후처리기를 제안하고, 자동 분절 결과를 직접 합성 단위로 사용할 수 있는 대량의 합성용 운율데이터 베이스 구축에 유용함을 기술한다. 제안된 후처리기는 수작업으로 보정된 데이터의 특징벡터를 다층 신경회로망(MLP: Multi-layer perceptron)을 통해 학습을 한 후, 자동 분절 결과와 MLP 기반 후처리를 이용하여 새로운 음소 경계를 추출한다. 우선, 특징벡터 set은 음성학적 지식이 최대한 반영되도록 선정되었다. 그리고, 경계를 추출하기 위해서 비선형 패턴분리에 탁월한 성능을 보이는 MLP를 이용한다. MLP는 매우 다양하게 나타나는 음소 경계간 음성학적 특징을 단시간 내에 적용할 수 있기 때문이다. 마지막으로, 음운환경별로 특징 벡터가 적용되는 제안된 후처리 알고리즘을 이용하여 자동 분절의 경계 오류에 대한 보상이 이루어진다. 문장 단위로 발화된 합성용 데이터베이스에서 후처리기로 보정된 분절 결과는 음성 언어 번역 시스템의 분할율보다 약 19.9%의 향상된 성능을 보였으며, 절대오류 (|Hand label position-Auto label position|)는 약 28.6% 감소되었다.
Measurements of the automobile manufacturers are available anywhere and anytime, directly based on the criterion of failure is measured. The maintenance of high-precision production activities is direct evidence of the fact that competitive manufacturing activities are very important in determining the success of companies to recall defective starting from raw material costs. The current manufacturing sites produce calipers and clearance gauge the degree of tool only specific. Therefore, judging the quality, including the number of errors, requires a lot of attention to the dimension failures in day-to-day measurements and measurement tasks and duties repeated in difficult situations. In this paper, we aim to develop a vehicle manufacturing plant site using each of the manufacturing processes while operating a measurement tool. We display it using the Image Processing PC-based S/W with all those visual facts by management and recorded as image information a more accurate and current situation to obtain information and share visual measurements. We carry out research on the design and development vision inspection algorithm applied for pattern-recognition techniques that can help manufacturing site quality control.
본 논문은 Verilog HDL이나 VHDL로 설계된 디지털 회로의 구조를 효율적으로 분석하고 디버깅 할 수 있는 ECAD 소프트웨어를 제안한다. 이 소프트웨어는 HDL 코드를 파싱하여 내부 구조에 대한 정보를 추출한 후 여러 가지 종류의 그래픽 도우미 예를 들면, 배치배선 알고리즘을 적용하여 생성된 계층구조의 논리회로도, 각 모듈을 구성하는 요소들을 나타내는 객체 나무 그래픽, 인스턴스들의 계층구조를 나타내는 인스턴스 나무 그래픽, 내부 시그널 간의 관계를 나타내는 시그널 관계도(SPD, signal propagation diagram) 등으로 표현된다. 디버깅에 가장 중요한 기능은 여러 가지 다른 관점의 설계 정보(HDL 코드, 객체 나무, 인스턴스 나무, SPD, 파형 등)에서 임의의 객체로부터 출발하여 동일한 설계 정보를 찾아내는 기능이다. 이러한 기능들은 설계자가 수작업으로 HDL 코드를 분석하고 버그를 찾아내는 기능을 효율적으로 수행할 수 있도록 돕는다.
최근, 반도체장비, 공구이송장비 그리고 CNC같은 여러 산업분야에 선형기계의 응용이 크게 증가하고 있다. 그러나 선형전동기는 진동특성을 가지고 있다. 그러므로 이러한 응용분야에서 정상 및 과도응답상태에서 고성능 위치제어가 필요하게 된다. 본 논문에서 간단하면서도 강력한 위치제어법을 2자유도 PID제어기를 이용하여 제안하였다. 이 기법은 과도현상없이 선형기계를 구동할 수 있는 잇점과 간단한 이득 동조를 할 수 있다. 일반적인 PID 제어기에 비해서 2자유도 제어기를 사용한 선형 전동기의 제어계의 성능 향상이 논의되었다. 그리고 시뮬레이션의 결과로 위치제어계의 응답에서 과도응답과 기동특성의 향상, 그리고 불필요한 진동성분의 제거에 유효함을 확인하였다.
Generally, in order to implement the CRM(Critical Conduction Mode), the analog controller is used rather than a digital controller because the control is simple and uses less power. However, according to the semiconductor technology development and various user needs, digital control system based on a DSP is on the rise. Therefore, in this paper, the CRM bridgeless PFC converter based on a digital control is proposed. It is necessary to detect the inductor current when it reaches zero and peak value, for calculating the on time and off time by using the current information. However, in this paper, the on-time and off-time are calculated by using the proposed algorithm without any current information. If the switching-times are calculated through the steady-state analysis of the converter, they do not reflect transient status such as starting-up. Therefore, the calculated frequency is out of range, and the transient current is generated. In order to solve these problems, limitation method of the on-time and off-time is used, and the limitation values are varied according to the voltage reference. In addition, in steady state, depending on the switching frequency, the inductance is varied because of the resonance between the inductor and the parasitic capacitance of the switching elements. In order to solve the problem, inductance are measured depending on the switching frequency. The measured inductance are used to calculate the switching time for preventing the transient current. Simulation and experimental results are presented to verify the proposed method.
복소 평면상의 임의의 점을 c값으로 고려한 2차 복소함수,$f(Z)=z^2+c$의 동력한 시스템은 초기 값0을 대입함으로써 획득된 순열의 발산성에 따라 C값을 분류한 만델브로트 집합을 제공한다[2]. 각 화소의 발산성을 나타내는 전형적인 만델브로트 집합 영상의 생성 에 소요되는 단축하기 위해 영역분할법(divide-and-conquer)과 삼각형을 이용한 경계 선 추적법( riangular boundary tracing)들이 제안되었다[4,6]그러나, 영역분할법은 만델브로트 집합의 생성에 영향을 주지 못하는 화소에 대한 순열의 발산여부를 조사하고 , 삼각형을 이용한 경계선 추적법은 8-연결성으로 연열된 일부 영상을 표현하지 못 하는 단점이 있다. 본 논문에서는 삼각형 추적 기법의 문제점을 해결한 화소의 8-연결성을 이용한 경계선 추적 알고리즘을 제안한다. 제안된 경계선 추적 기법은 8-연결성에 기초한 경계선 추적으로 만델브로트 영상을 생성할 때 영향을 주지 못하는 화소에 대한 발산 검사를 하지 않을 뿐만 아니라, hairly 구조와 같이 8-연결성을 갖는 만델 브로트 집합의 정확한 표현을 얻을 수 있다.
의료정보 보안에 대한 대안은 무엇보다 의료정보의 안전한 보존과 각종의 보안 위협으로부터 안전성을 강구하는 소프트웨어 설계로부터 시작되어야 한다. 의료정보시스템은 산재된 의료정보를 실시간으로 통합할 수 있어야 하고 의료정보의 교환은 신뢰할 수 있는 데이터 통신이어야 한다. 의료정보시스템의 소프트웨어 아키텍처 설계는 의료정보 공유상 보안 문제를 파악하고 의사소통을 통해 사용자 요구사항을 파악하여 소프트웨어 설계에 반영한다. 소프트웨어 프레임워크 설계, 메시지 표준 설계, 웹기반 프로세스간 통신절차 설계, 접근제어 알고리즘 설계, 아키텍처 기술서 작성, 아키텍처 평가의 제반 절차를 정립한다. 소프트웨어 아키텍처 초기 결정은 설계, 개발, 테스트, 유지보수에 지속적인 영향을 미친다. 또한 프로젝트상의 세부적 의사결정 근거가 된다. 의료정보보안 기반 소프트웨어 아키텍처 설계방법은 오늘날 중요한 과제가 되고 있는 의료정보 보안의 기본틀을 제공할 수 있을 것이다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.