• The Korean Journal of Food And Nutrition
• /
• v.30 no.4
• /
• pp.689-695
• /
• 2017

Ohmic heating is an internal heating method based on the principle that when an electrical current passes through food, electric resistance heat is uniformly generated internally by food resistance. Previous studies indicate that the thermal properties, external structure, internal structure, and swelling power of ohmic heat treated starch of various starches, such as potato, wheat, corn, and sweet potato, differed from those of conventional heating at the same temperature. In this study, the pasting property of starch, treated with ohmic and conventional heating, were measured by RVA (Rapid Visco-Analyzer). Our results show that as the ohmic heating temperature increased, the PV (Paste Viscosity) of the starch decreased significantly, and the PT (Pasting Temperature) increased. Changes in PV and PT indicate that the swelling of starch remains unchanged by ohm heating. The HPV (Hot Paste Viscosity), CPV (Cold Paste Viscosity) and SV (Setback Viscosity) of ohmic heated starch also differed from the conventional heated starch. The pasting property is similar to the viscosity curve of common cross-linked modified starch. In this experiment, we further confirm the similarity with modified starch and its usability.

• Food Science and Biotechnology
• /
• v.16 no.3
• /
• pp.485-488
• /
• 2007

Plentiful amount of spent yeast has been produced as a by-product from breweries. ${\beta}-Glucan$ was prepared from the spent brewer's yeast in a crude form with hot water extraction and subsequent enzymatic treatment. The crude ${\beta}-glucan$ preparation consisted of mainly glucan (53% of total wt), containing approximately 35% ${\beta}-glucan$ content of total weight. The effects of crude ${\beta}-glucan$ substitution (1-9%) on pasting properties of wheat flour and starch were determined using a Rapid Visco-Analyzer (RVA). Incorporation of yeast ${\beta}-glucan$ into wheat flour and starch significantly decreased peak and [mal viscosities, but slightly increased setback viscosity. The setback viscosity was considerably higher in starch/${\beta}-glucan$ suspension than in flour/${\beta}-glucan$ suspension. It was suggested that preparation of yeast ${\beta}-glucan$ into aqueous dispersion might affect pasting behaviors of wheat flour and starch.

• Food Science and Biotechnology
• /
• v.17 no.4
• /
• pp.814-818
• /
• 2008

Com and rice starches were physically modified by planetary mill. While native starches showed high peak viscosities (1,001 and 563 cp), it decreased largely (42 and 20 cp for rice and com starch, respectively) after 2 hr of physical modification. When two starches were co-ground, peak viscosities decreased more largely than single ground one only in 30 min, indicating the pasting properties could be easily changed by co-grinding. Especially, the higher the amount of com starch, the viscosity decreased more largely, which means that paste stability could be controlled also by changing the ratio of com and rice starch. Mean particle size increased with physical modification time since particles became spread because of shear force. There were also changes in surface morphology after physical modification. Fluid property, such as mean time to avalanche (MTA), was improved (from $6.16{\pm}0.47$ and $8.37{\pm}1.23\;sec$ to $5.47{\pm}0.78$ and $5.26{\pm}1.37\;sec$ for rice and com starch, respectively) by physical modification. Pasting property, such as swelling power, was also improved by physical modification. These mean that native starches can be applied to both conventional powder and new paste-food industry more efficiently by physical modification.

• Food Science and Biotechnology
• /
• v.17 no.4
• /
• pp.755-760
• /
• 2008

The aim of this study was to produce resistant starch preparations from acid-modified com starches prepared at various hydrolysis levels (0.5-4.0 hr). Effect of autoclaving cycles on resistant starch (RS) formation was investigated. Molecular weight distribution, pasting and functional properties of acid-modified com starches were determined. For RS formation native and acid-modified starch samples were gelatinized and autoclaved (1 or 2 cycles). While native and acid-modified starches did not contain any RS, the levels increased to 9.0-13.5% as a result of storage at $95^{\circ}C$ after first autoclaving cycle. Second autoclaving cycle together with storage at $95^{\circ}C$ brought final RS contents of the samples incubated at 4 and $95^{\circ}C$ after the first cycle to comparable level. As acid modification level increased, the amount of high molecular weight fractions decreased, resulting in significant decreases in viscosities (p<0.05). The samples produced in this study had low emulsion stability and capacity values.

• Food Science and Biotechnology
• /
• v.16 no.5
• /
• pp.663-674
• /
• 2007

Starches from different botanical sources differ in the ratio of amylose to amylopectin contents, molecular structures of amylose and amylopectin, granule morphology, and minor-component contents. These structural features result in different gelatinization, pasting, retrogradation properties, and enzyme digestibility of starch granules. In this review, compositions and molecular structures of starches and their effects on the physicochemical properties are summarized and discussed.

• Korean Journal of Human Ecology
• /
• v.14 no.6
• /
• pp.1037-1046
• /
• 2005

Using three consecutive years' harvested rices and their starches isolated from rice flours by alkaline method, it was found that no significant aging effect on rice flour and starch was observed based on following results. Proximate data of flours or starches showed in similarity, except high level of crude fat in rice flour and rice starch harvested in 2002. In SEM, the surface of aged rice flour had slightly layered shape due to possible abrasion during storage, and that of aged starch showed more smooth and less rigid polygonal shape. X-ray diffraction patterns of flours and starches were all A type, and crystallinity of rice starch harvested in 2000 had the smallest. From tristimulus colorimetry (Hunterlab Color), total color difference ($\Delta$E) calculated from L, a, and b gave less color difference with the darkest in 2002 harvested one among flours and the lightest in 2001 one among starches. WBCs of both 2002 rice flour and starch were the lowest among samples studied. At 80$^{\circ}C$, swelling power and solubility of rice starches harvested in 2000, 2001 and 2002 were 14.35, 9.75; 14.04, 9.6; and 12.49, 8.82, respectively. The highest peak viscosities measured by RVA were shown both in 2001 rice flour and in its starch. Starch and milled rice flour harvested in 2000 had higher hydrolytic $\alpha$-amylase, compared to other flour and starch samples.

• Food Science and Biotechnology
• /
• v.16 no.5
• /
• pp.832-835
• /
• 2007

Moisture content of normal, waxy, and high amylose com starches was adjusted to 10-35%, and irradiated in a microwave oven. The effect of microwave irradiation on the crystalline structure of starch was measured by using a differential scanning calorimetry (DSC), and X-ray diffractometry. Pasting viscosity profile was also determined by using a rapid viscoanalyzer (RVA). For all the 3 types of starches tested, the rate of temperature increase by the microwave irradiation was faster and more rapidly reached the maximum temperature of the pressure bomb ($120^{\circ}C$) when the moisture content was higher. X-ray diffraction and DSC data revealed that the microwave irradiated starch underwent partial disruption of crystalline structure. RVA studies showed that the irradiation caused significant reductions in maximal viscosity and breakdown, whereas pasting temperature was increased. Overall trends revealed that the microwave irradiation on the starch containing limited moisture content (less than 35%) provided the effects similar to the heat moisture treatment. These effects became more significant when the moisture content was higher. Compared to waxy com starch, normal, and high amylose com starches appeared to be more susceptible to the microwave irradiation.

• Korean Journal of Agricultural Science
• /
• v.42 no.3
• /
• pp.151-158
• /
• 2015

This study was conducted to know the variation and relationship of rice grain quality and starch pasting properties by transplanting times. Two early maturing rice cultivars which accounted for the most area of early maturing rice cultivar in Chungnam province were used. The experiment was laid out in a split-plot design with 3 replications. The main plot consisted of three transplanting times viz. early (April 25), ordinary (May 25) and late (June 25) with sub-plots containing two cultivars. According to the transplanting times, most of rice grain quality and starch pasting properties showed significant difference and Joami showed higher grain quality than Unkwang in all transplanting times. Especially, rice grain quality was improved when transplanted late, showing high head rice and glossiness of cooked rice due to the lower mean temperature during grain filling stage. Glossiness of cooked rice was positively correlated with head rice ratio, amylose content and setback value, and negatively correlated with chalky rice ratio and protein content. The highest positive and negative correlation were observed between breakdown value and peak viscosity ($r=0.98^{**}$), and breakdown and setback ($r=-0.94^{**}$), respectively. These results provide some information for rice researchers and producers producing cultivars with an improved quality, suggesting that rice quality is highly influenced by temperature at grain filling stage, and transplanting times is crucial in improving rice quality. In addition, starch pasting properties are useful for determining rice quality because rice grain quality and starch pasting properties are dependent on each other.

• Korean Journal of Food Science and Technology
• /
• v.36 no.4
• /
• pp.568-573
• /
• 2004

Effects of dry heating and pH on pasting, thermal, and textural properties of corn starch containing soy protein isolate (SPI) were investigated. Samples were prepared by drying corn starch dispersions containing 3% SPI at $40^{\circ}C$ (unheated sample) or additionally heating dried mixtures at $130^{\circ}C$ (heated sample). Pasting properties of starch samples and textural properties of starch gels were measured using Rapid Visco-Analyzer (RVA) and Texture Analyzer (TA), respectively. Effects of SPI addition and dry heating on retrogradation and microstructure of gel samples were investigated using DSC and SEM, respectively. Pasting viscosity of dry-heated samples was significantly higher than that of unheated samples, and at pH 8 compared to pH 6. Dry-heat treatment decreased fracture stress and strain of starch gels containing SPI. No significant effects of dry-heat treatment and pH were observed on retrogradation of starch gels. Addition of SPI retarded starch retrogradation and modified starch gel properties with increased nutritional value. Dry-heat treatment with SPI could be possible method for starch modification.

• Food Science and Biotechnology
• /
• v.18 no.4
• /
• pp.991-995
• /
• 2009

As a principle ingredient in omija-eui, the physicochemical properties of mung bean starch (MBS) paste were investigated and compared to those of rice and corn starch. The amylose and the protein content of MBS were higher than those of rice or corn starch while the total sugar content and the swelling power of MBS were lower. In addition, the clarity of MBS paste was higher than either rice or corn starch paste. Regarding pasting properties, the peak viscosity and cool paste viscosity of MBS were higher than those of either rice or corn starch. During the freeze-thaw cycle, MBS exhibited higher degree of syneresis than corn and rice starch, which decreased with high starch concentration and heating temperature. The paste properties and freeze-thaw stability of MBS showed a potential for improving the quality of omija-eui.