• Journal of The Korea Institute of Healthcare Architecture
• /
• v.26 no.2
• /
• pp.31-38
• /
• 2020

Purpose: The ramp is an important facility for the barrier free access and vertical circulation of users of various buildings, including users of walker, wheelchair users, stroller users, and baggage carriers. The installation standards for ramps in Korea have various problems during construction and BF certification. It is necessary to improve the criteria for ensuring practical mobility and safety. Method: Korean standard, International Standard(ISO 21542, 2011), German Standard(DIN 18040-1, 2010), Austrian Standard(OENORM B 1600, 2017), Swiss Standard(Norm SIA 500, 2009), Canadian Standard(Building Standards Guide, 2017), American Standard(ADA Standards, 2010) were investigated and analyzed. A comprehensive improvement of the ramp installation standards is proposed. Results: The ramp is a necessary facility for the barrier free access and vertical circulation of the disabled. It shall be installed with comprehensive consideration of the appropriate slope of the ramp, the distance of the continuous slope, the handle and upstand for pedestrian safety. In order to improve convenience, setting the proper slope and limiting the length of the slope are very important, and improvements are required to the levels presented by international and foreign standards. The unclear standards of Korean law and BF certification standards should be clearly improved so as not to be misinterpreted in construction and Barrier Free Certification. Implication: International and foreign standards should be reviewed to ensure practical mobility and safety. And comprehensive improvement measures should be presented through continuous research.

• Journal of the Korea Safety Management & Science
• /
• v.13 no.1
• /
• pp.189-193
• /
• 2011

The current standard cost for recycling applied under the Extended Producer Responsibility(EPR) institution, is not coping with continuously increased number of obligatory subject items as well as a variety of variable cost changing factors regarding the recycling treatment cost caused by price fluctuation such as increased material and labor cost entirely across the society; changes in recycling treatment process following the developing technologies; and changes in the required work forces and equipments followed by the trends of automated facilities. Despite such various cost fluctuation factors, the current EPR is not coping with the trends, making the re-calculation process difficult, which causes differences between the real treatment cost for recycling. In this study, the analysis was made on main factors affecting on the related cost and the related price changing index was calculated, by conducting the influence evaluation on the standard cost factors of the current standard cost for recycling. Through theses results, more objective standard will be set for the re-calculation of standard cost for recycling to greatly contribute to setting up the midterm and long-term strategies in the future towards efficient institution.

• Journal of the Ergonomics Society of Korea
• /
• v.34 no.2
• /
• pp.145-149
• /
• 2015

Objective: This study aims to analyze qualitatively if PTS methods are applicable to the agricultural works of Korea. Background: Many studies on setting standard time have been performed for manufacturing and service industries, not many studies on agricultural work have been carried out domestically and internationally. Method: MTM, MOST, Work Factor, MODAPTS were applied to some agricultural works, and limitations of each method were found out. Results: MTM was found to be more applicable than other methods, except for mental works. Conclusion: In general, many Korean agricultural works need squat postures, which are not taken into account in most of PTS methods. Continuous observation with stop watch is recommended for establishing the standard time for the agricultural works of Korea. Application: The information drawn from this study would be helpful to the farmer safety assurance system being established by Korean government.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.12A
• /
• pp.1034-1043
• /
• 2011

As an introduction of an open spectrum allocation approach with technology and service neutrality is expected as a way to solve problems of frequency shortage due to the expansion of demand for wireless multimedia communications, recently, the new management model of interferences and its standard setting are required. In this paper, as a model for this new interference management considering several candidates, Block Edge Mask(BEM) approach is chosen as the most appropriate model. And to investigate the effects of interference resulting from the standard setting of BEM, assuming the use of LTE systems in the Digital Dividend, BEM out-of-band baseline in the boundaries between digital terrestrial television (DTV) service and LTE mobile communications services which are heterogeneous systems for analysis is derived and the effect of setting guard band is analyzed.

• Journal of the Korean Geographical Society
• /
• v.37 no.3
• /
• pp.276-291
• /
• 2002

The contents of geographical education present too inclusive and abstract regard as criteria in an existing curriculum. And geographical education oneself's system is difficult because they are set to the one part of educational side. This study pursuit to make content standard of geographical education based on geography as an alternative. This paper present standard setting up 5 steps. They are Ultimate Theme, Basic Theme, Major Standard, Standard, Detailed Standard. Ultimate Theme is discern geographical education whole : understand of interaction human and environment, understand of place and region, understand of interaction human and region. Basic Theme is concrete of ultimate theme ; geographical skill, physical environment, human environment, place and region, interaction of human and region. Standard is concrete and measurable level of basic theme, it is consist of three steps in Major Standard, Standard, Detailed Standard tv level of specification. Major Standard is consist of 17 item, Standard is 48 item, and Detailed Standard is detailed to unit level.

• Journal of the Korea Institute of Building Construction
• /
• v.9 no.3
• /
• pp.95-101
• /
• 2009

Constructing large-scale mat foundation mass concrete is increasing for the stability of building structure, because a lot of high rise building are being built in order to make full use of limited space. However, It is of increasing concerns that because limited placing equipments, available job-site and systems for mass concete placement in construction field do not allow to place great quantity of concrete at the same time in large scale mat foundation, consistency between placement lift can not be secured. And also, it is likely to crack due to stress caused by the difference of hydration heat generation time. To find out the solution against above problems, this study is to reconfirm the performance of normal concrete designed by mix proportion and super retarding concrete. The Fundamental test shows what happens if low heat proportioning and control method of setting time are applied at the job-site of newly constructed high rise building. The test result show that slump flow of concrete has been somewhat increased as the target retarding time gets longer, while the air content has been slightly decreased but this is no great difference from normal concrete. The setting time shows to be retarded as target retarding time gets longer, the range of retarding time increases. It is necessary to increase the amount of mix of super retarding agent in the proportion ration by setting curing temperature high since outdoor curing is about 6 hours faster than standard curing, which means the temperature of the concrete will be higher than the temperature of the surrounding environment, due to its high hydration heat when applying in a construction site. The compressive strength of super retarding concrete appears to be lower than normal concrete due to the retarding action in the early stage. However, as the time goes by, the compressive strength gets higher, and by the 28th day the strength becomes the same or higher than normal concrete.

• Proceedings of the Korea Technology Innovation Society Conference
• /
• 1998.05a
• /
• pp.22-22
• /
• 1998

This paper reviews the benefits of users participation in IMT-2000 standardization by the creation of users coalitions, focusing in particular on phased standards strategy necessary for the evolutionary approach from second generation to third generation systems. It first presents in detail the current status of IMT-2000 standardization progress occurring at each regional standard body including TIA of US, ETSI of Europe, TTA of Korea and ARIB of Japan. With this clear understanding of standardization situations worldwide, we may be able to come up with our standards strategies related to IPR issues and efficient standard-setting mechanism between manufacturers and service providers. In addition, this paper addresses the necessity for phased licensing of IMT-2000 service in order to avoid the high cost of new infrastructures and ensure an acceptable financial investment returns for existing cellular and PCS service providers. An author hopes that this paper can provide the adequate standardization directions of IMT-2000 to satisfy the varying regional and global market requirements.

• Journal of Veterinary Clinics
• /
• v.31 no.4
• /
• pp.288-292
• /
• 2014

A critical assumption of the standard sample size calculation is that the response (outcome) for an individual patient is completely independent to that for any other patient. However, this assumption no longer holds when there is a lack of statistical independence across subjects seen in cluster randomized designs. In this setting, patients within a cluster are more likely to respond in a similar manner; patient outcomes may correlate strongly within clusters. Thus, direct use of standard sample size formulae for cluster design, ignoring the clustering effect, may result in sample size that are too small, resulting in a study that is under-powered for detecting the desired level of difference between groups. This paper revisit worked examples for sample size calculation provided in a previous paper using nomogram to easy to access. Then we present the concept of cluster design illustrated with worked examples, and introduce design effect that is a factor to inflate the standard sample size estimates.

• Journal of Industrial Technology
• /
• v.24 no.A
• /
• pp.263-271
• /
• 2004

Recently, the public postal service of Korea confronts with business environment changes such as the opening of postal market and appearance of the domestic competitive enterprises. It is the current state that the public postal service of Korea should have a competitive edge by the productivity improvement of business processes. In this paper, we proposed new working tables for manual letter sorting which is one of the important process in mail center. We suggested standard working method and standard time in a mail center Based on these, we established the procedure for setting up a fair day's work in other mail centers. By the result of this research, we expect that the productivity of the mail sorting operation will be increased.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2006.05a
• /
• pp.103-105
• /
• 2006

The revised legislation is introduced that the extension of the balcony area for the apartment houses is allowed. In the past the tenants had to install them illegally by themselves when they wanted to extend their balcony. We have reviewed the standard of the balcony's windows to be set up for them because the contractors can construct the exterior windows. At present, the detailed capacity standard for them is not established Of course some items of them are classified within five capacities among the KS standards. But the standard of the extensional balcony windows are not defined. Therefore this study is aimed at setting up the criteria of the noise, insulation and leak for the window system in expanding the balcony area and adopting it into window's works.