• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2007년도 정기학술발표대회 논문집
• /
• pp.762-767
• /
• 2007

시설물이 건설되는 생애주기의 전 과정에서 파생되는 방대한 정보는 저장 ${\cdot}$ 가공 ${\cdot}$ 교환을 필요로 하며, 이는 모든 분야에 적용된다. 또한, 기술의 진보로 인해 정보의 취합 ${\cdot}$ 접근방법 ${\cdot}$ 교환이 빈번하게 파생되고 있으며, 건설분야에 종사하는 실무자들의 자재정보획득 절차의 효율성 및 용이한 접근성에 대한 요구도 증대되고 있는 실정이기 때문에, 이를 해소하기 위한 활용성 및 확장성 ${\cdot}$ 표준성을 기반으로 한 건설자재 분류체계는 필수 불가결한 요소로 부각되고 있다. 그러므로 본 연구에서는 건설자재 분류체계의 국제표준성을 확보하고자 ISO기준에 대한 검토를 선행하여으며, 건설실무자들의 활용성 증대를 위한 건설 공정별 분류형식을 자재분류체계에 접목하고자 하였다. 이를 위해 국제표준 및 전자정보화를 위해 개발된 국제 통합분류체계인 OmniClass의 상세분석을 기반으로 건설공정별 분류인 Table 22와 UniClass의 상품 및 자재부분을 적용한 Table 23, 35, 41을 비교하여 건설자재 분류체계의 확장성 및 표준성을 확립하고자 하였다. 또한, 향후 전자상거래를 통한 사용성 및 국제호환성을 확보하기 위하여 국제상품분류(UN/SPSC)의 소성코드체계 접목도 시도하였다.

• 핵의학기술
• /
• 제16권1호
• /
• pp.108-114
• /
• 2012

면역측정법을 이용하는 검사실에서 가장 많이 사용하고 있는 상업용 제3자 정도관리물질이 BIO-RAD사에서 제공하는 물질이다. 현재 BIO-RAD 정도관리 물질에 포함된 Reference Sheet에는 비방사면역측정을 이용한 검사방법과 검사장비별로 각 측정물질의 Acceptable Range가 기재되어 있다. 그러나 방사면역측정법을 이용하여 검사하는 측정kit나 기기에 대해서는 실무에 적용할 만한 Acceptable Range에 대한 언급이 다소 부족한 것이 현실이다. 방사면역측정검사에 대한 Acceptable Range를 설정하여 검사결과의 객관성을 높이고 누적된 데이터를 제조사에 권고하여 발행되는 Reference Sheet에 기재하고자 한다. 본원에서는 2009년부터 부분적으로 BIO-RAD 정도관리 물질을 사용하여 2011년에는 일부 특정 항목을 제외한 대부분의 검사종목에 BIO-RAD 제 3자 정도관리물질을 사용하고 있다. 따라서 측정된 내부정도관리 데이터를 BIO-RAD사의 Unity Real Time program (version 1.0.9.27)을 이용하여 Acceptable Range를 설정하였다. BIO-RAD 정도관리 물질을 사용하는 약 50가지 검사종목의 20개 Point Data의 평균값, 표준편차, 변이계수를 구하여 측정kit별 Acceptable Range를 산출하였으며, 자동화 면역 측정기기인 Roche Elecsys/ E170/ cobas e Systems의 측정값과 비교하였다. 현재 시행하고 있는 외부정도관리 프로그램과 같이 BIO-RAD 정도관리 물질을 공통으로 사용하는 병원과 peer group을 설정하여 측정 kit별, 기기별 Acceptable Range를 제조사에 권고하여 Reference Sheet에 방사면역검사실에 적합한 Acceptable Range를 기재하여 검사결과의 객관성을 높이고 국내외적으로 방사면역측정법에 대한 인지도를 높이고자 한다.

• Mass Spectrometry Letters
• /
• 제5권2호
• /
• pp.52-56
• /
• 2014

Glycated hemoglobin (HbA1c) is used as an index of mean glycemia over prolonged periods. This study describes an optimization of enzyme digestion conditions for quantification of non-glycated hemoglobin (HbA0) and HbA1c as diagnostic markers of diabetes mellitus. Both HbA0 and HbA1c were quantitatively determined followed by enzyme digestion using isotope dilution liquid chromatography-tandem mass spectrometry (ID-LC-MS/MS) with synthesized N-terminal hexapeptides as standards and synthesized isotope labeled hexapeptides as internal standards. Prior to quantification, each peptide was additionally quantified by amino acid composition analysis using ID-LC-MS/MS via acid hydrolysis. Each parameter was considered strictly as a means to improve digestion efficiency and repeatability. Digestion of hemoglobin was optimized when using 100 mM ammonium acetate (pH 4.2) and a Glu-C-to-HbA1c ratio of 1:50 at $37^{\circ}C$ for 20 h. Quantification was satisfactorily reproducible with a 2.6% relative standard deviation. These conditions were recommended for a primary reference method of HbA1c quantification and for the certification of HbA1c reference material.

• 핵의학기술
• /
• 제16권2호
• /
• pp.139-148
• /
• 2012

이 실험은 검사를 매일 실행하고, 동결건조된 표준액을 매번 녹여서 사용하는 검사실은 그 안정성에 대하여 고민을 할 필요는 없지만, 검사를 일주일에 한번 또는 두 번 정도 실행하는 검사실에 대한 보고라고 할 수도 있다. 동결 건조한 표준물질은 용해한 후 다시 동결을 할 경우 보통 $-20^{\circ}C$이하에서 유효기간까지 보관하라는 식으로만 표현 되어져 있고, 이는 몇 번을 녹인 후 재사용해도 안정한가에 대해서는 표현된 바가 없기에 이번 실험은 동결건조한 표준용액을 녹임과 동결을 여러 번 번복하였을 때와 냉장보관을 하였을 시에 표준용액의 변화도와 이것이 결과에 미치는 영향을 비교 평가하였다. 시판되고 있는 방사면역측정법을 이용한 체외진단키트 중 동결건조표준용액으로 되어진 부갑상선호르몬(PTH), 부신피지자극호르몬(ACTH), 황체형성호르몬(LH) kit를 같은Lot.NO.로 구성하였다. 이를 D.W.로 각 용량에 맞게 용해한 후 3개의 대조군으로 분리하였다. 제1대조군은 녹임, 동결을 번복하는 방법으로 하였고 제2대조군은 용해한 후 Test tube에 1회 사용할 만큼 분주하여 동결을 하였고 제3대조군은 냉장보관으로 하였다. 표준액과 환자농도값 날짜 별로 비교하였고, pH Test를 하였으며 날짜 별 단순회귀분석 및 결정계수 산출을 하였으며 Excel Paired t-Test (p-value)를 하여서 유의수준관계를 분석하였다. 위에서 실험한 ACTH, PTH, LH의 동결건조 표준액은 반드시 냉동보관을 할 것을 권고한다. 이는 다른 동결건조표준액도 같은 방법으로 보관을 해야 할 것이다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.489-494
• /
• 2001

In this thesis, the microstructure and electrical properties of ZnO varistors were investigated according to ZnO varistors with various formulation. A∼E's ZnO varistor ceramics were exhibited good density, 95% of theory density and low porosity, 5%, wholly. The average grain size of A-E's ZnO varistor ceramics exhibited 11.89$\mu\textrm{m}$, 13.57$\mu\textrm{m}$, 15.44$\mu\textrm{m}$, 11.92$\mu\textrm{m}$, 12.47$\mu\textrm{m}$, respectively. Grain size of C's ZnO varistor is larger and grain size of A and D's are smaller than other varistors. In the microstructure, A∼E's ZnO varistor ceramics sintered at l130$^{\circ}C$ was consisted of ZnO grain(ZnO), spinel phase(Zn$\sub$2.33/Sb$\sub$0.67/O$_4$), Bi-rich Phase(Bi$_2$O$_3$) and inergranular phase, wholly. Reference voltage of A∼E's ZnO varistor sintered at 1130$^{\circ}C$ decreased in order D, E > A > B > C's ZnO varistors. Nonlinear exponent of varistors exhibited high characteristics, above 30, wholly. Consequently, C's ZnO varistor exhibited good nonlinear exponent, 68. Lightning impulse residual voltage of A, B, C and E's ZnO varistors suited standard characteristics, below 12kV at current of 5kA.

• 자원환경지질
• /
• 제27권5호
• /
• pp.469-477
• /
• 1994

Many researchers have investigated most representative sequential extraction method using various reagents for determining the chemical forms of metals in soils and sediments. In this paper, a newly modified method for sequential extraction scheme based on Tessier's method by Environmental Geochemistry Research, Centre for Environmental Technology, Imperial College, was introduced and examined. In comparison with Tessier's method, originally designed for sediment analysis by Atomic Absorption Spectrophotometry (AAS), the sequential extraction scheme has been developed for the multi-element analysis by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES). The partitioning of particulate trace elements was classified into five fractions: (i) exchangeable, (ii) bound to carbonates or specially adsorbed, (iii) bound to Fe and Mn oxides, (iv) bound to organic matter and sulphides and (v) residuals. The experimental results of the pilot study for in-house reference material (HRM2) and certified international standard reference material (SRM2711) using the modified method showed not only reasonable precision and accuracy but also acceptable overall recovery rates. In addition, mine dump soils sampled in the Dalsung Cu-W mine, Korea were prepared and sequentially extracted using the method. Most of Cu was bound to organic matter/sulphides and residual fractions. The dominant fraction of soil Pb and Zn in the study area was found in the residuals. The fraction of Cd showed a wide variation between samples and could be found bound to the carbonates or specially adsorbed, oxides, organic fraction and residuals. The recovery rates of Cd, however, were poor due to relatively low Cd concentrations in soils. The heavy metals in these mine dumps appear to be in the more inert forms and should not be readily bioavailable. The soils, however, had very low pH values (average 4.1) and had sandy textures; consequently, rapid infiltration of rainfall may increase leaching of Zn and Cd which were found to be around 5 to 10% of the exchangeable fraction. As a result of the investigation of this study, it has been strongly recommended that these mine waste materials should still be considered a significant contaminant source and will need environmental remediation to prevent pollutants from being released into the environment.

• 복식문화연구
• /
• 제23권1호
• /
• pp.32-44
• /
• 2015

Increasing of Korean old women's rate is demographic characteristics attributed an aging society, silver generation would lead to silver fashion market with steady competitiveness and interest in fashion. So the study attempts to use foundation material for silver's fashion design by analyzing design characteristics and processing development of design representative women's top. Selecting brand for collecting photo using study represents a mid- and premium-priced with reference Brand Yearbook. After selecting brand on domestic and foreign I have collected picture from Internet shopping mall and web-site of fashion brand, from October 2013 to July 2014, but I selected 840 pictures based on front poses for easy decision. In order to search design characteristics according to sort of silver blouse design on domestic and foreign. I have examined shape, color, pattern, fabric sensation, inside composition line and decoration with reference standard of analysis in preceding research. Data analysis method was conducted on analysis of frequency and cross analysis using SPSS statistical package 21.0. The conclusion of design characteristic according to type of blouse design for silver, H-silhouette in shirt blouse seems to fit in body transformation and expose silhouette with correcting the body flaw. Using soft material in T-shirt blouse they are able to conceal a body defect and express beautiful silhouette. By using detail in pullover shirt blouse and tunic blouse for point of design, it express glamour and luxurious. Most of blouse are printed various pattern, it would looks more gorgeous using pattern.

• 한국연초학회지
• /
• 제27권1호
• /
• pp.107-114
• /
• 2005

The uncertainty of measurement in quantitative analysis of ammonia by continuous-flow analysis method was evaluated following internationally accepted guidelines. The sources of uncertainty associated with the analysis of ammonia were the weighing of sample, the preparation of extracting solution, the addition of extracting solution into the sample, the reproducibility of analysis and the determination of water content in tobacco, etc. In calculating uncertainties, Type A of uncertainty was evaluated by the statistical analysis of a series of observation, and Type B by the information based on supplier's catalogue and/or certificated of calibration. It was shown that the main source of uncertainty was caused by the volume measurement of 1 mL and 2 mL, the purity of ammonia reference material in the preparation of standard solution, the reproducibility of analysis and the determination of water content of tobacco. The uncertainty in the addition of extraction solution, the sample weighing, the volume measurement of 50 mL and 100 mL, and the calibration curve of standard solution contributed relatively little to the overall uncertainty. The expanded uncertainty of ammonia determination in burley tobacco at $95\%$ level of confidence was $0.00997\%$.

• 대한기계학회논문집B
• /
• 제27권12호
• /
• pp.1699-1707
• /
• 2003

Coriolis mass flowmeter(CMF), which can measure the mass flow directly, is getting rapid attention for the industrial and custody transfer purpose. In order to study the characteristics and the applicability of CMF, it is tested with the national flow standard system. Two types of sensing tube, U-type and straight type, are employed in the test. Water, spindle oil and viscosity Standard Reference Material whose viscosities are 1, 20 and, 67 $\textrm{mm}^2$/s, respectively, are studied. It is shown that the linearity of CMF is getting deteriorated as the fluid viscosity increases, which is due to the zero drift and the relaxation time of the fluid. To test its applicability in the case of high pressured gas, it is calibrated using compressed air, It shows 1∼l.6 % deviations compared to the calibration results using water. It concludes that the fluid velocity in CMF should be lower than the sonic velocity. In addition, the effects of the vibration from the pipeline and pump on CMF as well as the long term stability are studied.

• 한국안전학회지
• /
• 제25권5호
• /
• pp.27-32
• /
• 2010

This study is to investigate and compare domestic hazardous toys with harmful substances with foreign toys so that we can find out management criteria for in cognitive infants. Actually, commercially used toys have been collected and tested to find out more effective management standard. it is tried to produce evaluation criteria of environmentally harmful substance but variety of product is needed for overcoming actual barrier due to lot of difficulty huge cost, time, objectiveness. Therefore, This study does not cover all the above. Establishment of evaluation criteria for product harmfulness made by Government or Local government should be continued to improve. Foreign reference material for toy product in Europe, USA, Japan have been investigated and domestic product have been collected and tested for containing heavy metals, formaldehyde, phthalate in the study. All the test have been made in accordance with KSM ISO 2124 to measure heavy metal transfer into body. Toy product used for the study have been purchased in the real market and some of them contains harmful elements with over standard. Post management system such as RAPEX to control periodically should be established for plastic toy with low quality product.