• Journal of the Korea Institute of Building Construction
• /
• v.16 no.2
• /
• pp.133-140
• /
• 2016

The amount of labor input in a construction project is used as source data to estimate construction cost and to understand the productivity of the construction industry. However, there is a significant difference between the standard of estimation and the actual amount of labor input, and a plan is needed to resolve this problem. For this reason, to establish a system with which the actual amount of labor input can be inputted in a more accurate and simpler manner, a new method is proposed in this study. In the new method, a digital pen is used to minimize the difference from traditional handwriting on paper using a pen, and eliminate the redundant input of information. This study is expected not only to reduce the actual amount of labor input but also to contribute to the productivity of construction cost estimate through the sharing or utilization of the information on the web.

• Journal of the Korean Geophysical Society
• /
• v.5 no.2
• /
• pp.131-142
• /
• 2002

Geomagnetic transfer function is generally estimated by choosing transfer to minimize the square sum of differences between observed values. If the error structure sccords to the Gaussian distribution, standard least square(LS) can be the estimation. However, for non-Gaussian error distribution, the LS estimation can be severely biased and distorted. In this paper, the Gaussian error assumption was tested by Q-Q(Quantile-Quantile) plot which provided information of real error structure. Therefore, robust estimation such as regression M-estimate that does not allow a few bad points to dominate the estimate was applied for error structure with non-Gaussian distribution. The results indicate that the performance of robust estimation is similar to the one of LS estimation for Gaussian error distribution, whereas the robust estimation yields more reliable and smooth transfer function estimates than standard LS for non-Gaussian error distribution.

• The KIPS Transactions:PartC
• /
• v.11C no.6 s.95
• /
• pp.755-764
• /
• 2004

Recently 'Banking IC Card Standard' and EMV Standard by the domestic standard is selected, and it is situation that is developing infrastructure vigorously to alternate Magnetic Stripe card by IC card. This paper analyzes EMV standard that is selecting public key cipher, and research wishes to study unexhausted EMV PKI relatively than internet PKI, WAP PKI etc. This paper propose utilizable EMV base Payment PKI model in IC card base payment system development, and developed EMV CA system with this. Also, this paper supplemented IC card Authentication mechanism that is defined in EMV standard, and propose 'Efficient smart card Authentication mechanism' to improve performance of this mechanism, and estimate performance.

• YAKHAK HOEJI
• /
• v.45 no.2
• /
• pp.227-236
• /
• 2001

The complexity and variability of both the biologicals and the bioassays used to test them led to the use of the reference standard- a sample of the product of defined purity and potency, against which all preparations of that product must be calibrated. In order to prepare and establish KFDA reference standard for recombinant human growth hormone (somatropin), somatropin substance was filled in ampoules in National Institute for Biological Standards and Control (NIBSC). The candidate KFDA reference standard for somatropin (designated as 98/674) was evaluated to determine the suitability of serving as a KFDA reference standard for somatropin by the collaborative study, in which 10 laboratories participated. Physicochemical analysis and in vivo bioassay were performed by direct comparison with the international somatropin standard 88/624. 98/674 was identified as somatropin by SDS-PAGE, IEF, peptide mapping, and HPLC. Determination of somatropin content by SE-HPLC yielded a mean estimate of 2.01 mg somatropin per ampoule. Data from the study also yielded mean values of 0.39 $\pm$ 0.26% for high molecular weight impurities by SE-HPLC and mean values of 2.13 $\pm$ 1.29% for somatropin related proteins by RP-HPLC. Estimates of relative potency by weight gain bioassay in the hypophysectomised rats showed that relative potency of KS 98/674 was 1.07 aganist IS 88/624. Based on the results of the collaborative study, the candidate reference standard for somatropin is suitable to serve as a KFDA reference standard for somatropin.

• Journal of Korean Society of Transportation
• /
• v.22 no.6
• /
• pp.7-16
• /
• 2004

In mode choice decision, travelers consider not only travel time but also reliability of its modes. In this paper, reliability was expressed in terms of standard deviation and maximum delay that were measured based on triangular distribution. In order to estimate value of time and value of reliability, the Multinomial and Nested Logit models were used. The analysis results revealed that reliability is an important factor affecting mode choice decisions. Elasticity is used to estimate the impacts of the different policies and system improvements for water transportation mode. Among these policies, decision maker can assess and select the best alternative by doing the benefit and cost analysis based on a new market share, the value of time, and the value of reliability. Finally, a set of promising policies and system improvement of the water transportation were proposed.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2004.11a
• /
• pp.579-583
• /
• 2004

A new and extendable highway should be planned and budgeted by estimating the total construction cost on the basis of the precise cost data. However, the demolition or disjointing cost could not reflect construction site condition sufficiently because it was simply estimated by multiplying the highway structure installation cost by the regular ratio($10\~70\%$) specified in the Korea Standard Estimate. The regular ratio for estimating of demolition and disjointing cost was calculated by not actual construction cost data but subjective experiences of field manager. Therefore, the reliance of the estimated demolition or disjointing cost has been declined. The primary objective of this study is to purpose the standard for estimating proper demolition or disjointing cost of relevant items through various site analysis and survey, and to investigate on the propriety of ratio-unit price method for estimating demolition and disjointing cost.

• Korean Journal of Construction Engineering and Management
• /
• v.9 no.2
• /
• pp.170-181
• /
• 2008

Cost of construction project have to be estimated based on drawing before execution. Cost estimate and check would be performed numerously for preparing general outline of requirements and determining the budget at conceptual planning stage, for obtaining decision on every matter related to design, specification, construction and cost at design stage, and for predicting bidding cost. Thus, importance of cost estimation cannot emphasize too much in construction. However, there are lack of standard estimation method, process, and cost analysis method, that square foot estimation method is as used as eyer, in Korea. Thus, This research present the direction for improving cost estimation and management in construction; It is demanded that establishing standard data base methodology, multi-level database model CUBE, and standard cost planning process, choosing cost estimation methodology according to objectives and cost planning process, and making more experts.

• Korean Journal of Construction Engineering and Management
• /
• v.21 no.3
• /
• pp.39-47
• /
• 2020

There are two kinds of cost estimate system in construction in china. Quota valuation model is a traditional cost estimate system under the unity of quantity and price, which is easier and has been used for decades. But the Quota valuation model becomes increasingly unsuited to the needs of society with the development of market economy. To meet the needs of China's market economy development and construction works in the field of international cooperation, the Bill of Quantities valuation model was introduced in 2003. However, there are still many shortcomings and deficiencies in the course of implementation of Bill of Quantities valuation model. In addition, interest in the Chinese construction market continues to increase in Korea due to the recent new North Korean policy and China's the Belt and Road policy. This paper aims to examine the cost estimate system of public construction works in China, and to provide basic data for deriving future improvement plans by comparing and analyzing it with standard cost estimate system in Korea.

• Journal of Dairy Science and Biotechnology
• /
• v.29 no.2
• /
• pp.59-68
• /
• 2011

In Korea, there are a couple of risk assessment organizations: The Animal Plant and Fisheries Quarantine and Inspection Agency(QIA) and the Korea Food and Drug Administration (KFDA). The major food laws include the Food Sanitation Act (FSA), the Livestock Product Processing Act (LPPA), and the Agricultural Products Quality Control Act (APQCA). Milk and dairy products are mostly controlled by the Food Sanitation Act and the Livestock Product Processing Act. This study was carried out to estimate the current standard methods of foodborne pathogens for dairy products, comparing the Livestock Products Processing Act with the Food Sanitation Act. The standard methods of foodborne pathogens for dairy products are composed by growth culture, isolation culture, and identification, however, standard methods of QIA and KFDA are different at the using of medium and inspection stage. Therefore, consolidation of risk management and risk assessment methods are regarded important to provide safe dairy products to consumer.

• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.13 no.4
• /
• pp.31-38
• /
• 2017

The heating and cooling air conditioning field has been increasing the problems of energy consumption and global warming in the world. A geothermal heat pump has been known as one of the highest efficient heating and cooling system. In this study, the analysis about the test standards of the geothermal heat pump of the Republic of Korea was executed. From the research, the following results were given. It is needed to address the domestic test standard for direct heat exchange geothermal heat pump. Water to air multi geothermal heat pump test standard was only developed in Korea. The test standard to calculate a seasonal energy efficiency ratio for cooling period and heat seasonal performance factor for heating period should be newly developed to estimate actual annual energy consumption and $CO_2$ emission.