• ETRI Journal
• /
• v.45 no.3
• /
• pp.365-378
• /
• 2023

ARIA is a block cipher proposed by Kwon et al. at ICISC 2003 that is widely used as the national standard block cipher in the Republic of Korea. Herein, we identify some flaws in the quantum rebound attack on seven-round ARIA-DM proposed by Dou et al. and reveal that the limit of this attack is up to five rounds. Our revised attack applies to not only ARIA-DM but also ARIA-MMO and ARIA-MP among the PGV models, and it is valid for all ARIA key lengths. Furthermore, we present dedicated quantum rebound attacks on seven-round ARIA-Hirose and ARIA-MJH for the first time. These attacks are only valid for the 256-bit key length of ARIA because they are constructed using the degrees of freedom in the key schedule. All our attacks are faster than the generic quantum attack in the cost metric of the time-space tradeoff.

• Bulletin of the Korean Mathematical Society
• /
• v.59 no.2
• /
• pp.319-343
• /
• 2022

We discuss the notions of positive expansivity, chain transitivity, uniform rigidity, chain mixing, weak specification, and pseudo orbital specification in terms of finite open covers for Hausdorff topological spaces and entourages for uniform spaces. We show that the two definitions for each notion are equivalent in compact Hausdorff spaces and further they are equivalent to their standard definitions in compact metric spaces. We show that a homeomorphism on a Hausdorff uniform space has uniform h-shadowing if and only if it has uniform shadowing and its inverse is uniformly equicontinuous. We also show that a Hausdorff positively expansive system with a Hausdorff shadowing property has Hausdorff h-shadowing.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.45 no.3
• /
• pp.149-159
• /
• 2008

We present new methods which transfer the color style of a source image into an arbitrary given reference image. Misidentification problem of color cause wrong indexing in low saturation. Therefore, the proposed method do indexing after Image separating chromatic and achromatic color from saturation. The proposed method is composed of the following four steps : In the first step, Image separate chromatic and achromatic color from saturation using threshold. In the second step, image of separation do indexing using cylindrical metric. In the third step, the number and positional dispersion of pixel decide the order of priority for each index color. And average and standard deviation of each index color be calculated. In the final step, color be transferred in Lab color space, and post processing to removal noise and pseudo-contour. Experimental results show that the proposed method is effective on indexing and color transfer.

• The KIPS Transactions:PartD
• /
• v.10D no.5
• /
• pp.821-828
• /
• 2003

Package software should have the feature that enables purchasers to discriminate a product suitable for them among a number of software belonging to the similar kind of product. Purchaser's ability to choose a package software depends on whether they can judge that a package software conforms to the relevant standard through an objective quality test process and method or not. There are the standards that can be applicable to the quality evaluation of package software, such as and . This study developed a system with which purchasers can effectively select a package software suitable for their needs, building quality test process for package software and developing test metric and application method.

• KIISE Transactions on Computing Practices
• /
• v.20 no.11
• /
• pp.604-609
• /
• 2014

Decoding processes in portable media players have a high computational cost, resulting in high power consumption by the CPU. If decoding computations are reduced, the power consumed by the CPU is also be reduced, but such a choice generally results in a degradation of the video quality for the users, so it is essential to address this tradeoff. We proposed a new CPU power management scheme that can make use of the scalability property available in the H.164/SVC standard. We first proposed a new video quality model that makes use of a video quality metric(VQM) in order to efficiently take into account the different quantization factors in the SVC. We then propose a new dynamic voltage scaling(DVS) scheme that can selectively combine the previous decoding times and frame sizes in order to accurately predict the next decoding time. We then implemented a scheme on a commercial smartphone and performed a user test in order to examine how users react to the VQM difference. Real measurements show that the proposed scheme uses up to 34% fewer energy than the Linux DVFS governor, and user tests confirm that the degradation in the quality is quite tolerable.

• Journal of IKEEE
• /
• v.24 no.3
• /
• pp.838-844
• /
• 2020

In this paper, we propose an efficient Viterbi processor using Joint Viterbi detection and decoding (JVDD) algorithm for a for bluetooth low energy (BLE) system. Since the convolutional coded Gaussian minimum-shift keying (GMSK) signal is specified in the BLE 5.0 standard, two Viterbi processors are needed for detection and decoding. However, the proposed JVDD scheme uses only one Viterbi processor by modifying the branch metric with inter-symbol interference information from GMSK modulation; therefore, the hardware complexity can be significantly reduced without performance degradation. Low-latency and low-complexity hardware architecture for the proposed JVDD algorithm was proposed, which makes Viterbi decoding completed within one clock cycle. Viterbi Processor RTL synthesis results on a GF55nm process show that the gate count is 12K and the memory unit and the initial latency is reduced by 33% compared to the modified state exchange (MSE).

• Transactions on Electrical and Electronic Materials
• /
• v.7 no.6
• /
• pp.313-318
• /
• 2006

This paper introduces a partial discharge (PD) severity metric, S, based on the evaluation of time-sequence PD data capture and resulting Time-Sequence-Analysis Discharge (TSAD) level distributions. Basically based on an IEC60270 measurement technique, each PD event is time stamped and the discharge level noted. By evaluating the time differences between a previous and subsequent discharge, a 3D plot of time-sequence activity and discharge levels can be produced. From these parameters a measurement of severity, which takes into account dynamic or instantaneous variations in both the time of occurrence and the level of discharge, rather than using standard repetition rate techniques, can be formulated. The idea is to provide a measure of the severity of PD activity for potentially measuring the state of insulation within an item of plant. This severity measure is evaluated for a simple point-plane geometry in $SF_{6}$ as a function of gap distance and applied high voltage. The results show that as the partial discharge activity increases, the severity measure also increases. The importance of future investigations, quantifications and evaluations of the robustness, sensitivity and importance of such a severity measurement, as well as comparing it with typical repetition rate assessment techniques, and other monitoring techniques, are also very briefly discussed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.5
• /
• pp.574-580
• /
• 2019

Conventional energy efficient routing protocols apply high weight to energy among routing metrics, causing nodes to concentrate on energy efficient paths and quickly exhaust energy on those paths. The unbalanced energy consumption of these wireless sensor networks causes network division and malfunction, and reduces network lifetime. Therefore, in this paper, it proposes a link cost based routing protocol to solve the unbalanced energy consumption of wireless sensor networks. The proposed routing protocol calculates the link cost by applying the weight of the routing metric differently according to the network problem situation and selects the path with the lowest value. As a result of the performance analysis, it confirmed that the proposed routing protocol has 22% longer network life, 2% energy consumption standard deviation and 2% higher data reception rate than the existing AODV protocol.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.2
• /
• pp.297-308
• /
• 2007

The types of industrial software are classified into package, embedded and system type. The Package type software means industrial ERP, the embedded software is built in industrial devices and the system type software controls the manufacturing and production system, In this paper, we described about the development of evaluation modules which can implement quality test and evaluation fur industrial embedded software. If you are planning to enhance the objectivity and the validity of evaluation modules, it is necessary to construct the system based on international standard. There are two international standard, ISO/IEC 12119 and ISO/IEC 9126 related to quality evaluation of software. Also ISO/IEC 14598-6 is the standard that defines the construction form of the evaluation modules. Based on these standards, We extracted the quality requirements of industrial embedded software and constructed the evaluation modules that can evaluate the content level of the quality requirements.

• Journal of Advanced Navigation Technology
• /
• v.24 no.6
• /
• pp.500-507
• /
• 2020

This paper presents a risk assessment methodology for standard flight procedures using recorded automatic dependent surveillance-broadcast (ADS-B) data. Utilizing the proposed methodology, the results of risk analyses in RKSI (incheon international airport) and RKSS (gimpo international airport) using trajectories that are regenerated based on 100 days of ADS-B data are presented. For the risk metric, detect and avoid well clear (DWC) is used. With this index, each procedure was evaluated for the sections with highest level of risk. Among the standard instrument departure (SID) of RKSI, the section between SI712 and RANOS of RNAV BOPTA 1L showed the highest level of risk. For the standard terminal arrival route (STAR) of RKSI, section between SI947 and DANAN of RNAV GUKDO 1N wasthe one with the highest level of risk. For RKSS, the segment between SS726 and SS727 of RNAV BULTI 1X and the segment between KAKSO and KALMA of RNAV OLMEN 1D showed the highest level of risk among the SIDs and STARs, respectivly.