• Restorative Dentistry and Endodontics
• /
• 제28권5호
• /
• pp.402-408
• /
• 2003

This study was done to present a criterion in selection of the most proper light sources and materials by measuring metamerism index(MI) of the light curing composite resins with spectrocolorimeter. Metamerism is defined when two objects appear to be the same color in one illuminant but different in another. This is due to the fact that they have different spectral curves that fail to match under the second illuminant. In this study, A1 & A3 shade of five light curing composite resins (Esthet-X, Filteck Z250, Filteck A110. Charisma. Vitalescence) were chosen based on Vita shade. Five samples were made for shade of each product with Teflon mold (diameter: 15mm, thickness: 2mm). Metamerism index of each samples on a Barium sulfate plate($L^{*}=96.54,{\;}a^{*}=0.19,{\;}b^{*}=0.01$) prepared for sample fixation were measured with spectrocolorimeter(Miniscan XE plus. Model 4000s. Hunter Lab. USA) by applying standard light source D^{65}, C. Fcw, TL84 and A. Standardization was done with reference standard(X=80.8, Y=85.7, Z=90.8) and light trap. The results were as follows. 1. Different resins with same Vita shade showed recognizable color difference (${\delta}E^{*}>2$). 2. All composites had MI below accepted value 0.5 between standard illuminant(D$_{65}$, C, & A) and below 1.5 under fluorescent condition (Fcw & TL84). 3. MI value between $D^{65}$ and A showed higher value than MI value between other source of light(p<0.01). 4. All resins except Z250 showed MI value that A3 is higher than A1 between $D^{65}$ and A(p<0.05).except Z250 showed MI value that A3 is higher than A1 between $D^{65}$ and A(p<0.05).

• 전자공학회논문지
• /
• 제53권6호
• /
• pp.110-121
• /
• 2016

색 항상성 알고리즘의 주된 목적은 광원의 색도를 추정하는 것으로, 최근 통계 기반과 학습 기반 및 통계와 학습의 조합 기반의 색 항상성 알고리즘들이 다양하게 연구되고 있다. 통계 기반 알고리즘은 특정 가정을 만족하는 영상들에 대해서만 수행이 가능하고, 학습 기반 알고리즘은 정확한 전처리와 학습 데이터가 요구되는 복잡한 방법이다. 그리고 통계와 학습의 조합 기반 알고리즘은 사전에 결정되거나 동적으로 변하는 가중치에 따라 결과가 의존적이기 때문에, 이를 정의하기 어려울 뿐만 아니라 에러에도 민감하다. 따라서 본 논문은 복잡한 전처리를 요구하지 않으며, 다양한 환경 조건 하에서 광원 추정이 가능한 새로운 최적화 방법을 제안한다. 영상 내에서 광원의 영향이 강하게 미치는 부분은 한 채널의 표준 편차가 나머지 두 채널에 비해 큰 차이를 가진다. 이 가정을 기반으로, 광원 정도(DIT, degree of illumiinant tinge)라고 불리는 비용 함수는 광원이 보정된 영상의 질을 결정하기 위해 제안된다. 표준 광원(d65) 하의 영상이 다른 광원 하의 영상에 비해 더 작은 DIT 값을 가진다. 본 논문에서 군집단 최적화(PSO, particle swarm optimization) 기반의 집단지성(swarm intelligence)은 DIT를 최소화하기 위해, 주어진 영상의 최적 광원을 찾는데 사용된다. 제안한 방법은 실세계 데이터셋을 통해 평가하였고, 실험 결과는 제안된 방법의 효율성을 입증하였다.

• 한국의류학회지
• /
• 제44권1호
• /
• pp.68-83
• /
• 2020

This study suggests a method to predict the color appearance of textiles that shifts depending on illumination variations. The suggested method allows the calculations of lightness, chroma, and hue appearance values from the spectral reflectance values of the textile and illuminant. The accuracy of the method was evaluated through numerical and statistical comparisons between the predicted and the measured color appearance values of 24 fabric samples under CIE standard illuminant D65. As a result, there were excellent agreements between the two data sets with the error values close to zero. The predicted color appearance values of 24 samples under two illuminating (color temperature-luminance) conditions, 2700 K-100 cd/㎡ and 6500 K-100 cd/㎡, were then compared to prove the significant effect of illumination on the color appearance of textiles. The color appearance values were also compared with spectrophotometrically measured physical color attributes, that is, true colors of the samples. The physical color attributes of samples were unchanged; however, differences in color appearance under different conditions were generally much larger than the suprathreshold color difference tolerances discussed in the color science literature. Finally, the magnitude of the illumination effect depending on the physical color attributes of samples was also analyzed.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(4)
• /
• pp.307-310
• /
• 2002

Color reproductions in most ink jet printer are quite different from that of standard CRT (cathode ray tube) monitor display because of the nonlinear characteristic in subtractive color reproduction. Gray scale CCT(correlated color temperature) reproductions in a typical printer are vary with the input RGB level. A simple method for making constant gray scale CCT and gamma value in photo paper is proposed in this paper. The compensation of the CCT with white point of the photo paper under the CIE standard illuminant D65 and color correction has been confirmed using the LUT(look-up table) to compensate the CCT and gamma curve characteristic.

• Journal of the Optical Society of Korea
• /
• 제18권5호
• /
• pp.507-516
• /
• 2014

We present a hybrid method for spectral reflectivity recovery, using 3D extrapolation as a supplemental method for 3D interpolation. The proposed 3D extrapolation is an extended version of 3D interpolation based on the barycentric algorithm. It is faster and more accurate than the conventional spectral-recovery techniques of principal-component analysis and nonnegative matrix transformation. Four different extrapolation techniques (based on nearest neighbors, circumcenters, in-centers, and centroids) are formulated and applied to recover spectral reflectivity. Under the standard conditions of a D65 illuminant and 1964 $10^{\circ}$ observer, all reflectivity data from 1269 Munsell color chips are successfully reconstructed. The superiority of the proposed method is demonstrated using statistical data to compare coefficients of correlation and determination. The proposed hybrid method can be applied for fast and accurate spectral reflectivity recovery in image processing.

• The Journal of Advanced Prosthodontics
• /
• 제5권3호
• /
• pp.262-269
• /
• 2013

PURPOSE. Perceived color of ceramics changes by the spectral power distribution of ambient light. This study aimed to quantify the amount of shifts in color and color coordinates of clinically simulated seven all-ceramics due to the switch of three ambient light sources using a human vision simulating spectroradiometer. MATERIALS AND METHODS. CIE color coordinates, such as $L^*$, $a^*$ and $b^*$, of ceramic specimens were measured under three light sources, which simulate the CIE standard illuminant D65 (daylight), A (incandescent lamp), and F9 (fluorescent lamp). Shifts in color and color coordinate by the switch of lights were determined. Influence of the switched light (D65 to A, or D65 to F9), shade of veneer ceramics (A2 or A3), and brand of ceramics on the shifts was analyzed by a three-way ANOVA. RESULTS. Shifts in color and color coordinates were influenced by three factors (P<.05). Color shifts by the switch to A were in the range of 5.9 to 7.7 ${\Delta}E{^*}_{ab}$ units, and those by the switch to F9 were 7.7 to 10.2; all of which were unacceptable (${\Delta}E{^*}_{ab}$ > 5.5). When switched to A, CIE $a^*$ increased (${\Delta}a^*$: 5.6 to 7.6), however, CIE $b^*$ increased (${\Delta}b^*$: 4.9 to 7.8) when switched to F9. CONCLUSION. Clinically simulated ceramics demonstrated clinically unacceptable color shifts according to the switches in ambient lights based on spectroradiometric readings. Therefore, shade matching and compatibility evaluation should be performed considering ambient lighting conditions and should be done under most relevant lighting condition.

• Restorative Dentistry and Endodontics
• /
• 제30권3호
• /
• pp.170-177
• /
• 2005

본 연구에서는 shade guide를 이용하여 치아의 색상을 결정하는데 있어 shade guide의 형태가 미치는 영향을 평가 하기 위해 시행하였다 8가지 서로 다른 색상 code (Al, A2, Bl, B2, B3, C2, C3, D3)를 사용하는 광중합 복합레진 (Esthet-X, Dentsply, USA)을 이용하여 각 색상마다 상악 중절치 모형, 치아형 shade guide, 도넛형 shade guide, 및 회색 shield를 포함하는 shade guide를 제작하고 무작위로 기호를 부여하였다. 제작된 치아 모형을 배열하고 전남 대학교병원 치과 진료처에 근무하는 19명의 수련의와 전남대학교 치과대학 2, 3학년 학생 65명을 대상으로 회색 배경 판과 D$_{65}$ 표준광 하에서 각 치아의 색상과 일치하는 shade guide를 선택하게 하였다. 연구 결과 Bl 색상은 실험에 적용한 3가지 형태의 모든 shade guide에서 약 95%의 가장 높은 정확도를 보였으며 , 색상간 색차가 가장 적은 B2와 C2는 3가지 형태의 모든 shade guide에서 서로 비슷한 정도의 교차 선택율을 보였다. 또한 관찰자에 상관없이 치아 형태의 shade guide는 가장 높은 정확도를 보인 반면 (p < 0.05), 도넛 형태의 shade guide는 가장 낮은 정확도를 보였다 (p <0.05).

• The Journal of Advanced Prosthodontics
• /
• 제5권3호
• /
• pp.296-304
• /
• 2013

PURPOSE. The aim of this study was to evaluate the effect of polishing and glazing on the color and spectral distribution of monolithic zirconia. MATERIALS AND METHODS. Forty-five monolithic zirconia specimens ($16.3mm{\times}16.4mm{\times}2.0mm$) were fabricated and divided into 5 groups according to the number of A2-coloring liquid applications (Group I to V). Each group was divided into 3 subgroups according to the method of surface treatments (n=3): N: no treatment; P: polishing; G: glazing. Color and spectral distribution of five different areas of each specimen were measured according to CIELAB color space in the reflectance mode relative to the standard illuminant D65 on a reflection spectrophotometer. Data were analyzed using one-way ANOVA followed by Tukey's HSD test, Pearson correlation and regression analysis (${\alpha}$=.05). RESULTS. There was a significant difference in CIE $L^*$ between Subgroup N and P, and in CIE $b^*$ between Subgroup P and G in each group. Spectral reflectance generally decreased in Subgroup P and G in comparison with Subgroup N. Color differences between Subgroup P and G were within the perceptibility threshold (${\Delta}E{^*}_{ab}$ < 3.7) in most groups. Highly significant correlation was found between CIE $b^*$ and each subgroups as the number of coloring liquid applications increased ($R^2$ >0.88, P<.001). CONCLUSION. A perceptible color difference can be detected after polishing of monolithic zirconia. Polishing decreases the lightness, and glazing also decreases the lightness, but increases the yellowness of monolithic zirconia.

• Journal of the Optical Society of Korea
• /
• 제17권4호
• /
• pp.344-349
• /
• 2013

This paper proposes a simulation algorithm to assess the gradual yellowing vision of the elderly, which refers to the predominance of yellowness in their vision due to aging of the ocular optic media. This algorithm employed the spectral transmittance property of a yellow filter to represent the color appearance perceived by elderly people with yellow vision, and modeled the changes in the color space through a spectrum change in light using the yellow filter effect. The spectral reflectivity data of 1269 Munsell matte color chips were used as reference data. Under the standard conditions of a D65 illuminant and a $10^{\circ}$ observer of 1964 CIE, the spectrum of the 1269 Munsell colors were processed through the yellow filter effect to simulate yellow vision. Various degrees of yellow vision were modeled according to the transmittance percentage of the yellow filter. The color differences before and after the yellow filter effect were calculated using the DE2000 formula, and the color pairs were selected based on the color difference function. These color pairs are distinguishable through normal vision, but the color difference diminishes as the degree of yellow vision increases. Assuming 80% of yellow vision effect, 17 color pairs out of $(1269{\times}1268)/2$ pairs were selected, and for the 90% of yellow vision effect, only 3 color pairs were selected. The result of this study can be utilized for the diagnosis system of gradual yellow vision, making various types of test charts with selected color pairs.

• 전자공학회논문지S
• /
• 제35S권11호
• /
• pp.133-143
• /
• 1998

시청자가 일반 가정에서 텔레비전을 시청할때 주로 백열등이나 형광등의 실내 조명광을 켠 상태에서 시청하게 된다. 시각이 표준 조명과 다른 주위 조명광에 색 순응되어졌을때, 텔레비전 수상기의 동일한 속도는 꽤 다른 색으로 느껴진다. 따라서 텔레비전 색 재현에서는 인간 시각의 색 순응 현상을 고려한 원 피사체의 겉보기를 재현하는 대응색 재현이 바람직하다. 본 논문에서는 텔레비전을 표준 조명 ($D_{65}$)이 아닌 백열등이나 형광등 조명하에서 시청할 때 인간 시각의 색 순응 현상을 고려하여 원 피사체의 색과 동일한 느낌을 갖도록 수상관상에서 대응색을 재현하는 방법을 제안하였다. 제안한 방법에서는 주위 조명광에 의한 눈의 순응 화이트 좌표를 Hunt의 실험결과로부터 얻었으며, 색 순응 현상에 의한 대응색의 좌표를 Bartleson의 색 순응 예측으로부터 구하였다. 또한 제안한 방법을 실제 텔레비전에 적용시키기 위하여 텔레비전 수상기 내부의 색 복조축 위상 및 이득을 독립적으로 변화시켜 주위 조명에 따른 대응색이 디스플레이 되도록 하였다. 제안된 방법을 실험한 결과 형광등과 백열등 조명에 대한 대응색으로 실제의 수상기에 디스플레이시켜서 텔레비전을 시청했을 때, 보정하지 않은 경우에 비하여 원 피사체의 색에 매우 가깝게 느껴짐을 확인하였다.