• 복식
• /
• 제51권7호
• /
• pp.147-165
• /
• 2001

The objective of this study was to develop the Jeogori Pattern for 9 to 10 year-old boys To determine the measurement items for the Jeogori Pattern making, applied factor analysis, correlation analysis and regression analysis to the 37 measurement items of the 9 to 10 year-old boys classified as a standard somatotype. To understand the shape and variation of the body surface, analyzed the replica of the upper body surface that was obtained by the method of using surgical tape. Be based on the results of the above studies, designed the Jeogori Pattern. The designed pattern was evaluated by the sensory test. The drafting methods of Jeogori Pattern obtained are as follows. $\circled1$ The measurement items are Bust Girth, Center Back Waist Length, Neck Width, and Hwajang Length. $\circled2$ Jeogori Length Center Back Waist Length$\times$4/3 $\circled3$ Front Body Girth(1/2) : B/2 + 1.5cm Back Body Girth(1/2) : B/2 + 3.5cm $\circled4$ Jin-Dong : B/4 + 3cm $\circled5$ Back Godae Width(1/2) : Neck Width/2 + 1.7cm Front Godae Width(l/2) : Back Godae Width(1/2) - 2cm $\circled6$Back Godae Point is 1.5cm higher than shoulder line, and Front Godae Point is 1.5cm lower than shoulder line. $\circled7$ Back Godae Depth: 1.2cm + 1.5cm = 2.7cm The Jeogori Pattern designed by the above method Is as (fig. 8) The results of the sensory test of the new pattern are as fellows. Except for 2 items, every mark of 24 test items has over 5.0 point and a total average mark is 5.25 point. Witch is a good mark. Therefore the new pattern is valid. Especially, the parts of Git, sleeves and back face have a high mark, so the appearances of those parts are excellent.

• 한국의류산업학회지
• /
• 제18권5호
• /
• pp.708-715
• /
• 2016

This study researched the sizing system of dress form for apparel manufacturing in the domestic market. It aims to be used as basic data for the development of a dress form that could be used by manufacturers of senior men's clothing. Research focused on the sizes presented on the homepages of 17 dress form manufacturers in the USA, France, Japan, and Korea. Body measurement was made for senior men in their 50's over men (n=134). Six items were measured by the 'Standard body measurement of Size Korea'. The type of dress form in the domestic market can be classified into half-body type (upper body type and lower body type), torso, and whole-body type; in addition, each type is divided into upper arm, arm, crotch, and thigh. Korean dress form manufacturers produced/sold diverse kinds (size 7-9) for women; however, they used large/small sizes or product sizes for men without defining sizes. The chest size (93-105cm) has not been standardized while the rates of waist circumference, hip circumference and shoulder length (in accordance with the chest size) were all different. Global dress form brands manufactured reflecting body dimensions by the state organization USA ASTM. Japan JIS. For this reason, most domestic clothing businesses depend on imported dress forms. Especially, there were no dress forms for senior men. With the growing market for seniors, it would be necessary to produce senior dress forms for clothing production that reflect the body shapes and sizes of seniors.

• 한국의류학회지
• /
• 제31권1호
• /
• pp.44-56
• /
• 2007

The aim of this study is to provide fundamental data on the development of dress shirts pattern appropriate for the body types of athletes. The research subjects are 257 athletes from wrestling, bodybuilding, weight lifting, Judo, canoe, rowing. In regards to the category used in the measurement of bust somatotype, there are 48 types directly measured, 4 types indirectly measured, 7 types calculated and 1 bodyweight of type, making it 60 categories in total. The bust somatotype of a sports athlete and general person were compared together and after examining the characteristics of the bust somatotype, the somatotype of sports athlete was divided according to drop. The results of the study are as follows: 1. Questionnaire Results of the questionnaire showed that 63.4% of the respondents chose dress shirt as the most uncomfortable upper garment for athletes. And as for the result of the most uncomfortable body part turned out to be 'the neck is tight'. 2. Somatotype Analysis Results of direct, indirect measurement and the average somatotype of 97 National standard physique were compared. The characteristics of somatotype of athletes with well-developed upper body are that they are taller and have longer upper body and arms than the general person. And also the width of the trunk is wider, the girth bigger and the waist measure relatively slimmer. Looking at sports by category, it we could see that wrestlers were the largest neck parameter and width. Bodybuilders were the largest body parts for most categories. Weight lifting and Judo athletes were the largest waist and buttock. Canoe and rowing athletes were the largest height and arm parts. Dividing the somatotype of athletes according to drop, 72.8% of the research group belonged to the body type that resembled the letter Y.

• 한국의류학회지
• /
• 제15권2호
• /
• pp.139-150
• /
• 1991

The purpose of this study is to do the Somatotype classification according to the type of shoulder-neck and to give the thinkness of shoulder pad according to them. Therefore this study was measurement body size of 201 and the somatotypes were classified as their plumb line. The standard somatotype of this measurement was classified as 9 type according to its angle of shoulder inclination and neck length. Pads which have different thickness (1 cm, 1.5 cm, 2 cm) were attached to the 9 body type and the set-in sleeve blouse and raglan sleeve blouse were made and tring test and sensory test were accomplished. The results of this study were as follows: 1 . Classification of shoulder-neck relationship. Angles of shoulder inclination ($15^{\circ},\;21^{\circ},\;27^{\circ}$), lock lenaths (10 cm, 12.5 cm, 15 cm) were classi- fied as 3 type each and these types were combined as 9 types. II . The result of angle difference of shoulder inclination according to pad thickness. 1) In case of set-in pad. angle is increased $5.75^{\circ}$ per 1 cm of pad thickness. 2) In case of raglan pad. angle is increased $6.45^{\circ}$ per 1 cm of pad thickness. III. The most fit pad thickness to the 9 types. In case of set-in sleeve blouse. 1) High shoulder-long neck, Standard shoulder-long neck Low shoulder-long neck, Stan-dard shoulder·standard neck. Low shoulder-standard neck: 1.5 cm. 2) High shoulder-standard neck, Standard shoulder-short neck, Low shoulder-short neck: 1 cm. 3) High shoulder-short neck: 0 cm(without pad) In case of raglan sleeve blouse. 4) High shoulder-long neck, Standard shoulder-long neck, Low shoulder·long neck, Stan-dard shoulder-standard neck, Low shoulder-standard neck: 1.5 cm. 5) High shoulder-standard neck, Standard shoulder-short neck, Low-shoulder-short neck: 1 cm. 6) High shoulder-short neck: 0 cm(without pad)

• 한국의류학회지
• /
• 제35권8호
• /
• pp.933-945
• /
• 2011

This research proposes a pattern design method for 24 pleated skirts in order to develop an automatic draft program for pleated skirts that will enhance fit and enable mass production. The research method and results are outlined as follow. 1. Three-dimensional body measurements were conducted on 30 randomly selected women in their 20s. By using 34 body measurement items and 6 types of calculations among the items, the items required in the designing of an original pleated skirt were extracted. They were then interpreted through correlation analysis, variance analysis, a t-test, linear regression analysis and multiple regression analysis. 2. An extra amount was added to the waist measurement and external capsule measurement according to the number of times the pleats coincided and the thickness of the fabric by the degree of polymerization of the horizontal cross section (the test of this research: 0.518mm). The extra amount of waist measurement was 3.6cm while the hip measurement was 4.3cm larger than the hip measurement combined with the external capsule measurement and the extra amount. 3. Based on the ${\pm}$standard deviation/2 as the average of the difference between the external capsule measurement and waist measurement, the subjects were classified into 3 somatotypes. Somatotype 1 presented an average total length of waist darts of 23.6cm while that of somatotype 2 was 26.2cm and that of somatotype 3 was 30.2cm. It has been confirmed that there is a significant difference among somatotypes in the total length of waist darts from the front center to the front side and the total length of waist darts from the side to the back center in terms of the average amount of waist darts for every 12 parts on the WL.

• 센서학회지
• /
• 제19권6호
• /
• pp.435-442
• /
• 2010

Typically, the vital signs that are representing the state of human body, are the body temperature, sphygmus, respiration and blood pressure. The body temperature is the result of metabolic regulation and human steady-state body temperature is maintained from 35.9 to $37.4^{\circ}C$ by heat regulatory center. The body temperature is indicative of infection and especially it should be monitored to requiring intensive care patients or after surgical patients. But, measuring of body temperature to a heavy workload on nursing staff has been recognized. And, the health service of nurse is limited by simple tasks such as the measurement and record of vital sign. In this paper, the body temperature monitoring telemetry system was proposed to prove the recoding and transmission of body temperature patch system according the standard(ISO TS11073-92001). We proposed the transmission protocol to suit the MFER(medical waveform format encoding rules). The telemetry patch system was implemented and it was verified by experiments.

• 한국의류학회지
• /
• 제12권3호
• /
• pp.319-331
• /
• 1988

The purpose of this study was to develop a computer program for pattern making of women's Dooroomaky. The following results were given through utilizing the Computer in pattern making of Dooroomaky for women. 1. Computerization of the pattern making process was expected to provide higher accuracy and efficiency in pattern making. 2. Basic pattern was drafted by the hand-operation. In this study, this Dooroomaky basic pattern was selected. And a computer program for drafting was developed. Refer to