• 제목/요약/키워드: Standard Plans

검색결과 477건 처리시간 0.026초

아파트 단위세대 평면 형태에 따른 건물에너지효율 평가 (A Study on the Evaluation of the Building Energy Efficiency in Accordance with the Shapes of the Apartment Unit Plans)

  • 김창성;서경욱
    • KIEAE Journal
    • /
    • 제13권4호
    • /
    • pp.55-62
    • /
    • 2013
  • Korea Government have carried out various policies to reduce the energy consumption that cause the global warming and environmental pollution. Energy consumption of buildings in Korea has reached 24% of total energy quantities and energy consumption of apartment has been continuously increasing. It has executed the building energy efficiency rating system and energy performance assessments and certification systems have been in force to save energy consumption of buildings. Therefore, this study tried to asset the energy performance of apartment according to the shapes of unit plan, and then to evaluate the energy performance of apartment according to altering balcony area into living area in the unit plan of apartment and thus, to present the effective unit plan to reduce the energy consumption. According to the results, in case of standard unit plan, the 3Bay and 4Bay unit plans showed more effective energy consumption than the 2Bay unit plan, respectively, 5%, 6%, and in case of extended unit plan, respectively, 2%, 5%. Compared the energy efficiencies of the standard unit plan to the extended unit plan, the standard one showed more effective energy consumption than the extended one, respectively, 2% in case of the 2Bay and 4Bay unit, 5% of the 3Bay unit.

저전압 전원용 서지보호장치 철도 규격의 개선방안 (Improvement Plans of Railway standards for Surge Protective Devices used in Low-voltage Power circuits)

  • 정용철;김언석;이재호;조봉관;김재철
    • 조명전기설비학회논문지
    • /
    • 제16권2호
    • /
    • pp.90-97
    • /
    • 2002
  • 본 논문에서는 철도 시스템에서 사용하는 저압 전원용 서지보호장치(surge protective devices) 규칙의 성능평가 항목 및 성능개선 방안에 대하여 고찰하였다. 먼저 철도시스템 환경과 관련된 전자기장해(electromagnetic interference) 현상을 검토하였다. 그리고 국제규격인 IEC 및 IEEE와 평가항목 및 펑가방법 등을 비교 검토하였다. 검토 결과 국내 철도관련 규격은 국제규격과 비교하여 비교하여 발견하였다. 개선방안으로 서지 보호소자 단위의 시험은 삭제하고, 규격 종류는 전원용과 신호용으로 분리하며, 서지 파형은 국제적으로 인정된 것을 사용하도록 제안하였다. 철도용 저압 서지보호장치에 대해 서지제한전압 측정 및 서지 수명시험을 국제규격에 따라 시험한 결과 만족스러운 결과를 얻었다.

경기도내 병원에 종사하는 임상병리사의 표준주의 수행도에 영향을 미치는 요인: 건강신념모델을 중심으로 (Awareness and Compliance with Standard Precautions among the Hospital Laboratory Room Technicians in Gyeonggi Province: Based on Health Belief Model)

  • 김두진;이원재;최광일;우성범;송양민
    • 한국학교ㆍ지역보건교육학회지
    • /
    • 제16권3호
    • /
    • pp.91-102
    • /
    • 2015
  • Objectives: The current study intended to find the awareness and compliance with the standard precautions of the laboratory technicians working in the hospitals in Gyeonggi Province. Understanding on the relationships among factors would be helpful in developing work environment of the laboratory technicians to prevent infection and improving the quality of infection control in hospitals. Methods: Data were collected from the 313 laboratory technicians in hospitals in Gyeonggi Province. SPSS 21.0. and AMOS 18 were adopted to analyze the data. Results: The results of the analysis confirmed that the influence of perceived sensitivity and cues to action influenced perceived threats of disease. Perceived threats and perceived barriers to compliance with the standard precautions and perceived benefits of compliance with the standard precautions significantly influenced the probability of compliance with the standard precautions. Conclusion: It was recommended that hospitals need to prepare plans to prevent the employees from infection in the hospitals. The plans must include education, regular exams, injury prevention, and provision of personal protective equipments.

뇌종양 환자의 3차원 입체조형 치료를 위한 뇌내 주요 부위의 모델치료계획의 개발 (Development of Model Plans in Three Dimensional Conformal Radiotherapy for Brain Tumors)

  • 표홍렬;이상훈;김귀언;금기창;장세경;서창옥
    • Radiation Oncology Journal
    • /
    • 제20권1호
    • /
    • pp.1-16
    • /
    • 2002
  • Purpose : Three dimensional conformal radiotherapy planning is being used widely for the treatment of patients with brain tumor. However, it takes much time to develop an optimal treatment plan, therefore, it is difficult to apply this technique to all patients. To increase the efficiency of this technique, we need to develop standard radiotherapy plant for each site of the brain. Therefore we developed several 3 dimensional conformal radiotherapy plans (3D plans) for tumors at each site of brain, compared them with each other, and with 2 dimensional radiotherapy plans. Finally model plans for each site of the brain were decide. Materials and Methods : Imaginary tumors, with sizes commonly observed in the clinic, were designed for each site of the brain and drawn on CT images. The planning target volumes (PTVs) were as follows; temporal $tumor-5.7\times8.2\times7.6\;cm$, suprasellar $tumor-3\times4\times4.1\;cm$, thalamic $tumor-3.1\times5.9\times3.7\;cm$, frontoparietal $tumor-5.5\times7\times5.5\;cm$, and occipitoparietal $tumor-5\times5.5\times5\;cm$. Plans using paralled opposed 2 portals and/or 3 portals including fronto-vertex and 2 lateral fields were developed manually as the conventional 2D plans, and 3D noncoplanar conformal plans were developed using beam's eye view and the automatic block drawing tool. Total tumor dose was 54 Gy for a suprasellar tumor, 59.4 Gy and 72 Gy for the other tumors. All dose plans (including 2D plans) were calculated using 3D plan software. Developed plans were compared with each other using dose-volume histograms (DVH), normal tissue complication probabilities (NTCP) and variable dose statistic values (minimum, maximum and mean dose, D5, V83, V85 and V95). Finally a best radiotherapy plan for each site of brain was selected. Results : 1) Temporal tumor; NTCPs and DVHs of the normal tissue of all 3D plans were superior to 2D plans and this trend was more definite when total dose was escalated to 72 Gy (NTCPs of normal brain 2D $plans:27\%,\;8\%\rightarrow\;3D\;plans:1\%,\;1\%$). Various dose statistic values did not show any consistent trend. A 3D plan using 3 noncoplanar portals was selected as a model radiotherapy plan. 2) Suprasellar tumor; NTCPs of all 3D plans and 2D plans did not show significant difference because the total dose of this tumor was only 54 Gy. DVHs of normal brain and brainstem were significantly different for different plans. D5, V85, V95 and mean values showed some consistent trend that was compatible with DVH. All 3D plans were superior to 2D plans even when 3 portals (fronto-vertex and 2 lateral fields) were used for 2D plans. A 3D plan using 7 portals was worse than plans using fewer portals. A 3D plan using 5 noncoplanar portals was selected as a model plan. 3) Thalamic tumor; NTCPs of all 3D plans were lower than the 2D plans when the total dose was elevated to 72 Gy. DVHs of normal tissues showed similar results. V83, V85, V95 showed some consistent differences between plans but not between 3D plans. 3D plans using 5 noncoplanar portals were selected as a model plan. 4) Parietal (fronto- and occipito-) tumors; all NTCPs of the normal brain in 3D plans were lower than in 2D plans. DVH also showed the same results. V83, V85, V95 showed consistent trends with NTCP and DVH. 3D plans using 5 portals for frontoparietal tumor and 6 portals for occipitoparietal tumor were selected as model plans. Conclusion : NTCP and DVH showed reasonable differences between plans and were through to be useful for comparing plans. All 3D plans were superior to 2D plans. Best 3D plans were selected for tumors in each site of brain using NTCP, DVH and finally by the planner's decision.

표준관입시험 간격 결정을 위한 개념적 알고리즘 (A Conceptual Algorithm for Determining the Spacing of Standard Penetration Test Spots.)

  • 하비마나;이동훈;한경보;김선국
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2015년도 추계 학술논문 발표대회
    • /
    • pp.185-186
    • /
    • 2015
  • The Standard penetration test determines the type of soil according to soil bearing capacity, and this classifies the subsoil into many layers. Construction project managers are willing to know the depth of the present types of subsoil on site in order to make plans on earthwork stage during excavation. However the standard penetration test may not provide accurate information on subsoil type due to incorrect spacing. To solve this problem, this study propose a conceptual algorithm for determining the spacing of standard penetration test spots to essentially tests relevant locations on which to be applied the standard penetration test. This provides the acquirement of the accurate layered model volume of earthwork revised into geological columnar section. This algorithm will determine the appropriate standard penetration test spots spacing on a given size of site to optimize the accuracy of the earthwork volume, time and cost.

  • PDF

표준품셈 관부설 및 접합공사 품 개정 요인 분석 (Analysis on the Factor of Revision of Pipe Laying Down Material and Connection Work Material)

  • 오재훈;안방율
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2018년도 춘계 학술논문 발표대회
    • /
    • pp.302-303
    • /
    • 2018
  • This study analyzed the major revision factors and revision contents for 'Construction-Standard-Production-Rate for Construction Works in 2018. Part 16. Pipe Laying Down and Connection" which was revised by the construction expense estimation standard's middle and long-term plans. The main reasons for the revision was analyzed to be unclear construction scope, limitations in applicable pipe material based on the facility type, labor force mainly composed of ordinary workers, limitations of labor force, and incomplete appropriation standard for the tool rent fee and equipment expenses. Through revision of factors, common items were newly established, organization was revised, the labor force was mainly composed of the technicians, and basis for appropriation of equipment expenses was arranged. In addition, through periodic revision, the appropriation standard for bend and special pipes was set. Consequently, more practical construction cost estimate standard is arranged through revision.

  • PDF

국제 표준에 부합하는 ITS 센터-노변장치간 통신환경 구축 방안 연구 (A Sturdy on the Deployment Strategy of Communication Environment for Adopting the International Standards between ITS Center and Roadside Equipment)

  • 이상현;손승녀;조용성;이철기
    • 한국ITS학회 논문지
    • /
    • 제11권4호
    • /
    • pp.34-50
    • /
    • 2012
  • 본 연구는 국내 ITS 분야 센터와 노변간 통신의 상호 운영성 및 호환성과 국제경쟁력을 확보하기 위해 국내 도입이 필요한 ITS 센터와 노변간 통신환경에 대한 정의와, 이의 도입을 위한 기술적/정책적 방안을 수립하고 정보교환 에뮬레이터를 개발하여 VMS를 시범적용 함으로써 이에 대한 유효성을 검증하였다. 먼저, 국내 도입이 필요한 ITS 센터와 노변간 정보교환 표준 환경은 DATEX와 SNMP 듀얼 프로토콜로 정의하고, 메타속성 정의, OID 도입 등 메시지 정의 체계에 대해 제시하였다. 도입을 위한 기술적/정책적 방안으로는 표준도입 시범사업을 통한 Feed-back으로 충분한 실효성 확보, 표준에 대한 교육/홍보 선행, ITS 분야 OID 도입 및 체계적인 관리방법, 정보교환 표준규격에 적합한 하드웨어 표준 규격의 개발, 듀얼프로토콜 도입을 위한 통합관리시스템 구축이 필요함을 제시하였다.

지적측량수행자의 업무영역 개선방안에 관한 연구 (Improvement Plans for Working Area of Cadastral Surveyors)

  • 홍성언
    • 한국산학기술학회논문지
    • /
    • 제15권1호
    • /
    • pp.237-242
    • /
    • 2014
  • 본 연구에서는 지적측량수행자의 개방 업무 현황 및 실태 등을 분석하여 지적측량수행자의 업무수행 영역에 관한 개선방안을 제시하여 보고자 하였다. 연구성과는 다음과 같다. 현황 및 실태 분석된 내용을 토대로 지적측량수행자 업무영역의 개선방안으로서 지적확정측량 대상 범위의 확충, 지적확정측량업무의 참여 기준 완화 그리고 지적재조사사업에 있어 지적측량업자의 폭넓은 참여 기회 제공 방안을 제시하였다. 국토교통부에서는 지적측량수행자 업무영역의 개선방안에 대해 다방면으로 합리적이고 현실적인 지적측량시장 여건을 조성할 수 있도록 입법정책적 개선을 시도한다면 지적측량수행자간의 공생적 발전을 이룰 것이다.

방재력을 고려한 도시의 풍수해 안전기준 개발방향 설정 연구 (A Study on a Direction of the Development of City on Storm and Flood Risk Safety Standards in Consideration of Resilience)

  • 김미선;신진동;심숙연;김현주
    • 한국안전학회지
    • /
    • 제30권1호
    • /
    • pp.127-136
    • /
    • 2015
  • This study has analyzed city plans and disaster prevention plans from the perspective of resilience and established a direction of the development of city safety standards. The analysis made use of the 5 functions of resilience (5Rs) and foreign cases. As a result of the analysis, the direction of the development of city safety standards was drawn from 4 perspectives at large. First, this study proposed a method of the systematization of the safety standards involved in components within city plans. Second, it suggested a method to strengthening urban resilience abilities in terms of the association between disaster prevention and city plans. Third, it found out components requiring safety standards considering foreign and other standards, and proposed a direction of complementary measures for safety standards. Lastly, it came up with a direction of the development of city safety standards, the necessity of which are required though existing plan criteria did not contain them. This study is significant in that it has defined the ultimate goal of safety a city should pursue as resilience and proposed a direction of the development of related standards.

통계적 분석을 이용한 간이급수시설의 오염원에 관한 연구 (A Study on the Pollution Sources of Simple water Supply Piped System using Statistical Analysis)

  • 이홍근;김현용;백도현;김지영;이태호
    • 환경위생공학
    • /
    • 제14권2호
    • /
    • pp.56-67
    • /
    • 1999
  • This study was performed to suggest the basic data and plans for the establishment of safe water supply plans in simple water supply piped system in the rural areas. In 4 different places, 24 points of water sources 36 points of taps from water sources were sampled. Of the whole 60 points, 55 points were ground water and 5 points were surface water. 14 items were measured for the analysis of water quality on each samples. The measured items were analyzed again by statistical method ; cluster analysis and principle components analysis. The results of this study are as followed. 1) In water quality analysis on water sources, 4 items, bacteria, E.coli, NH3-N and Fe exceed the standard. Of 24 points, 20 points(83%) on bacteria, 1 point(4%) on NH3-N and Fe exceed the standard. 2) In water quality analysis on near and remote taps, 4 items, bacteria, E.coli, NH3-N and Fe , exceed the standard. Of 36 points, 20 points (81%) on bactria, 1 pint(3%) on NH3-N and Fe exceed the standard. 3)Cluster analysis on water quality shows the differences by the kinds of water sources, geographical characteristics and distance from water sources. 4) Principle components analysis on ground water shows that Factor 1 and Factor 3 are natural fluctuation by the content of soil. Also, Factor 2 and Factor 4 are penetration of pollutants to underground. Therefore, it is needed to take deeper ground water in order to prevent from pollution in the areas which have ground water as water source . 5) Principle components analysis on surface water shows that Factor 1 is penetration of vacteria from surface to water source when rainfalls. Also, Factor 2 is fluctuation of water quality by the geographical characteristics. Therefore, the counterplans against non-point pollution source must be taken. Filtration and disinfection facilities are needed in the areas which have surface water as water source.

  • PDF