• 한국태양에너지학회 논문집
• /
• 제29권6호
• /
• pp.102-109
• /
• 2009

The research on meteorological data in Korea has been carried out but without much consistency and has been limited to some areas only. Of relatively more importance has been the area in the utilization of the solar energy, however, the measurement of the global solar horizontal irradiation has been quite limited. In the current study, the actually measured value of the global solar horizontal irradiation from the meteorological data and the theoretically calculated value of the global solar horizontal irradiation from the cloud amount will be analyzed comparatively. The method of analysis will employ the standard meteorological data drafted by the Korean Solar Energy Society, the standard meteorological data from the presently used simulation program and the corresponding results have been compared with the calculated value of the global solar horizontal irradiation from the cloud amount. The results of comparing the values obtained from MBE(Mean Bias Error), RMSE(Root Mean Squares for Error), t-Statistic methods and those from each of the standard meteorological data show that the actually measured value of the meteorological data which have been converted into standard meteorological data with the help of the ISO TRY method give the monthly average value of the global solar horizontal irradiation. These values compared with the monthly average value from the IWEC from the Department of Energy of the USA show that the value of the global solar horizontal irradiation in the USA is quite similar. In the case of the values obtained from calculation from the cloud amount, the weather data provided by TRNSYS, except only slight difference, which means that the actually measured values of the global solar horizontal irradiation are significant. This goes to show that in the case of Korea, the value of the global solar horizontal irradiation provided by the Korea Meteorological Administration is will be deemed correct.

• Journal of Communications and Networks
• /
• 제14권3호
• /
• pp.273-279
• /
• 2012

In this paper, we propose an iterative interstream interference cancellation technique for system with frequency selective multiple-input multiple-output (MIMO) channel. Our method is inspired by the fact that the cancellation of the interstream interference can be regarded as a reduction in the magnitude of the interfering channel. We show that, as iteration goes on, the channel experienced by the equalizer gets close to the single input multiple output (SIMO) channel and, therefore, the proposed SIMO-like equalizer achieves improved equalization performance in terms of normalized mean square error. From simulations on downlink communications of $2{\times}2$ MIMO systems in high speed packet access universal mobile telecommunications system standard, we show that the proposed method provides substantial performance gain over the conventional receiver algorithms.

• 품질경영학회지
• /
• 제30권2호
• /
• pp.130-151
• /
• 2002

This paper investigates the relation between the Process capability index(PCI) and the quality assurance level under various conditions. The effect of the off-targetness of the process mean, deviation from the nomality, the estimation error, and tile measurement error on the quality assurance level is evaluated. Various distributions such as the Student-t, the chi-square, the gamma, the Weibull, and the log-normal distributions are considered to evaluate the deviation from the nomality. The quality levels under abnormal conditions turn out to be severely different from that under the standard condition. We provide tables and graphs of the quality assurance level on various abnormal conditions. In order for the industry users to use the PCI properly, they should refer to the tables and graphs, especially when they are not certain about the standard assumptions on which the PCI depends.

• 한국측량학회지
• /
• 제36권1호
• /
• pp.9-15
• /
• 2018

Precise regional geoid heights on and around Mount Jiri were calculated and were compared to the KNGeoid14 (Korean National Geoid 2014) model. In this study, gravimetric geoid heights were calculated by using RCR (Remove-Compute-Restore) technique and then hybrid geoid heights were calculated by using the LSC (Least Square Collocation) method in the same area. In addition, gravity observation and GNSS(Global Navigation Satellite System) surveying performed in this study were utilized to determine gravimetric geoid heights and to compute hybrid geoid heights, respectively. The results of the study show that the post-fit error (mean and standard deviation) of hybrid geoid heights was evaluated as $0.057{\pm}0.020m$, while the mean and standard deviation of the differences were -0.078 and 0.085 m, respectively for KNGeoid14. Therefore, hybrid geoid heights in this study show more considerable progress than KNGeoid14.

• 한국해안·해양공학회논문집
• /
• 제22권4호
• /
• pp.279-285
• /
• 2010

해안 구조물의 신뢰성 설계과정에서 조위자료를 정규분포로 가정하여 설계를 수행하는 경우가 빈번하다. 그러나 조위 자료는 쌍봉형 정규 분포 형태를 따르기 때문에 설계과정에서 등가 정규분포 개념에 근거하여 등가평균 및 등가표준편차를 추정하게 되며, 이 과정에서 정규분포를 가정한 경우의 추정 평균 및 표준편차와는 다른 추정오차가 발생하게 된다. 본 연구에서는 쌍봉형 정규분포 형태를 따르는 조위에 대하여 등가평균 및 등가표준편차를 추정하고, 정규분포를 가정하여 추정한 평균과 표준편차와 비교하였다 그 결과, 등가 매개변수 추정오차는 조위조건과 조위의 크기에 따라 크게 변하고 있는 것으로 파악되었다. 인천의 경우, ${\pm}400cm$ 조건에서 등가평균 및 등 가표준편차 추정편차는 각각 100 cm 이상, 80~100 cm 정도로 파악되었으며, 조석이 약한 포항에서는 ${\pm}60cm$ 조건에서 모두 2~4 cm 정도의 작은 추정 편차를 보이고 있는 것으로 파악되었다.

• Steel and Composite Structures
• /
• 제21권4호
• /
• pp.921-947
• /
• 2016

Concrete Filled Fibre Reinforced Polymer Tube (CFFT) for new columns construction has attracted significant research attention in recent years. The CFFT acts as a formwork for new columns and a barrier to corrosion accelerating agents. It significantly increases both the strength capacity (Strength enhancement ratio) and the ductility (Strain enhancement ratio) of reinforced concrete columns. In this study, based on predefined selection criteria, experimental investigation results of 134 circular CFFT columns under axial compression have been compiled and analysed from 599 CFFT specimens available in the literature. It has been observed that actual confinement ratio (expressed as a function of material properties of fibres, diameter of CFFT and compressive strength of concrete) has significant influence on the strength and ductility of circular CFFT columns. Design oriented models have been proposed to compute the strength and strain enhancement ratios of circular CFFT columns. The proposed strength and strain enhancement ratio models have significantly reduced Average Absolute Error (AAE), Mean Square Error (MSE), Relative Standard Error of Estimate (RSEE) and Standard Deviation (SD) as compared to other available strength and strain enhancement ratios of circular CFFT column models. The predictions of the proposed strength and strain enhancement ratio models match well with the experimental strength and strain enhancement ratios investigation results in the compiled database.

• 대한전자공학회논문지TC
• /
• 제42권8호
• /
• pp.17-24
• /
• 2005

본 논문에서는 Blind 채널 등화를 위한 error feedback 필터를 갖는 Decision Feedback Equalizer(DFE) 구조의 등화기를 설계하였다. 제안하는 등화기는 Least Mean Square(LMS) 알고리즘과 Multi-Modulus Agorithm(MMA)을 이용하였으며 64/256 QAM을 위해 설계되었다. 기존의 MMA 등화기는 두개의 transversal 필터를 이용하거나 feedforward와 feedback 필터를 이용하는 반면에 제안하는 등화기는 feedforward와 feedback 그리고 error feedback 필터를 사용하여 채널 적응 성능을 향상시켰으며 탭 수를 감소시켰다. 제안하는 구조는 $SPW^{TM}$ 툴을 이용 시뮬레이션을 수행하여 성능을 개선시킬 수 있었다. 그리고 VHDL을 이용해 시뮬레이션을 수행하였으며 논리 합성은 0.25um 셀 라이브러리를 이용하였다. 설계한 등화기는 약 19만 게이트 수와 15MHz의 동작속도를 보였다 또한 FPGA 칩을 내장한 이뮬레이션 보드를 사용하여 성능 검증을 수행하였다.

• Journal of Communications and Networks
• /
• 제17권1호
• /
• pp.12-20
• /
• 2015

Convolutional codes which are terminated by direct truncation (DT) and zero tail termination provide unequal error protection. When DT terminated convolutional codes are used to encode short messages, they have interesting error protection properties. Such codes match the significance of the output bits of common quantizers and therefore lead to a low mean square error (MSE) when they are used to encode quantizer outputs which are transmitted via a noisy digital communication system. A code construction method that allows adapting the code to the channel is introduced, which is based on time-varying convolutional codes. We can show by simulations that DT terminated convolutional codes lead to a lower MSE than standard block codes for all channel conditions. Furthermore, we develop an MSE approximation which is based on an upper bound on the error probability per information bit. By means of this MSE approximation, we compare the convolutional codes to linear unequal error protection code construction methods from the literature for code dimensions which are relevant in analog to digital conversion systems. In numerous situations, the DT terminated convolutional codes have the lowest MSE among all codes.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제36권2호
• /
• pp.78-86
• /
• 2010

Introduction: Cone beam computed tomography (CBCT) has various advantages and is used favorably in many fields in dentistry. Especially, CBCT is being used as basic diagnostic tool for 3-dimensional analysis in orthognathic patient. Two-dimensional cephalograms can be synthesized from CBCT digital imaging and communications in medicine (DICOM) data. In this study, conventional cephalograms and CBCT were taken simultaneously, and representative landmarks were located and analyzed in its accuracy and reproducibility. Materials and Methods: Ten patients who had orthognathic surgery in Wonkwang University Daejeon Dental Hospital participated in this study. For each patient, CBCT and conventional cephalogram was taken. By using Ondemand (Cybermad, Korea), 2-dimensional cephalograms was established on CBCT. In addition, 19 landmarks were designated and measured by 3 orthodontists twice a week. After these landmarks were transferred to a coordinate, distance of landmark and axis, standard error, distribution degree were measured, compared and analyzed. Results: Comparing the CT ceph group and conventional cephalogram group, CT ceph group had shown shorter distance of landmark and axis in S, Hinge axis, Bpt, Ba, Or, Corpus left. Standard error of the mean shows that CT ceph group has better reproducibility in Or, Corpus left, Hinge axis at X axis and Na, U1R, U1T, Bpt, PNS, Ba Corpus left, Hinge axis at Y axis. In both groups, mean error was less than 1.00 mm, no significant difference were found between CT ceph group and conventional cephalogram group in all measurements. Furthermore, comparing two groups, each 17 landmarks out of 19 had its characteristic in distribution degree. Conclusion: No significant difference were found between CBCT composed cephalographic radiograph and conventional cephalograghic radiograph, clinical application may be possible if improved.

• 지질학회지
• /
• 제54권5호
• /
• pp.579-584
• /
• 2018

해수침투가 발생할 때 혼합비를 결정하는 것은 해수침투연구에 매우 중요한 사항이며, 단성분 혼합분석방법을 주로 사용한다. 본 연구에서는 이러한 해수와 담수의 혼합비 계산시 발생되는 오차를 불확정성의 원리를 이용하여 결정하였다. 또한 해수침투 혼합비를 계산할 때 평균값과 표준편차의 차이에 의해 발생할 수 있는 혼합비의 오차를 제시하였다. 이러한 오차의 크기는 (1) 혼합비가 커질수록, (2) 사용된 평균값과 표준편차값의 차이가 클수록, 마지막으로 (3) 해수와 배경지하수의 추적자 농도 값이 작을수록 커진다. 특히, 해수침투가 발생하여 양이온교환반응이 일어날 때 이온델타(이론적인 지하수화학성분과 실제 시료의 화학성분의 차이)값이 0 근처에서는 오차값이 지구화학적인 상태(침전 또는 용해)를 결정하는 데에 기여할 수 있다.