• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.6
• /
• pp.4056-4066
• /
• 2015

For understanding of terminology related to u-Health and activating u-Health industry, it is required to develop u-Health standard terminology for communication. The purpose of this study is to develop u-Health standard terminology and provides guidelines for terminology standardization in order to develop the u-Health standard terminology. We finally developed the 187 u-Health standard terminology through the process of data acquisition, term extraction, term refinement, term selection and term management based on reports, glossary and Telecommunications Technology Association (TTA) standards about u-Health. As a result, the standard terminology and guidelines of u-Health optimized to the domestic environment were suggested. They included details of definition, classification, components, the methods and principles of the process for u-Health standard terminology. Presented in this study, u-Health standard terminology and guidelines for terminology standardization would assist the cost-reducing of employing terminology and management of it, while making information transfer easy. This would make possible promoting efficient development of u-Health industry in general.

• Journal of the Semiconductor & Display Technology
• /
• v.14 no.2
• /
• pp.67-72
• /
• 2015

For the development of UFS device test system, M-PHY specifications should be matched with MIPI-standard which is analog signal protocol. In this paper, the implementation methodology and hardware structure for the M-PHY AFE (Analog Front End) Block was suggested that it can be implemented using universal components without ASIC process. The testing procedure has a jitter problem so to solve the problems we using ASIC process, normally but the ASIC process needs a lot of developing cost making the UFS device test system. In is paper, the suggestion was verified by the output signal which was compared to the MIPI-standard on the Prototype-board using universal components. The board was reduced the jitter on the condition of HS-TX and 5.824 Gbps Mode in SerDes (Serialize-deserializer). Finally, the suggestion and developed AFE block have a useful better than ASIC process on developing costs of the industrial UFS device test system.

• Journal of the Korean Home Economics Association
• /
• v.40 no.10
• /
• pp.161-176
• /
• 2002

This study is a basic research for the estimation of the value of unpaid household labor within the national economy system to be reflected in the related policy-making. By measuring economic value of unpaid household labor and estimating the ration to GDP, this study attempted to confirm the productivity of the unpaid household labor and thus contribute to the improvement of socio-economic status of women. Especially, it focused on the development of a standard of estimating unpaid household labor as a method applicable to the present economic and legal system. To organize the method of economic valuation of unpaid household labor and calculate the ration to GDP, this study used three approaches: replacement cost method individual function, replacement cost method generalist and opportunity cost method. Although the estimated result revealed that the economic value of unpaid household labor showed a great extent of deviation according to the estimating methods and the wage rate, total value of household labor ranged from one hundred and thirty eight to two hundred and thirty trillion wens, about 28-48% of GDP in Korea.

• Steel and Composite Structures
• /
• v.30 no.3
• /
• pp.293-304
• /
• 2019

The optimum cost of a reinforced concrete plane and space frames have been found by using the Genetic Algorithm (GA) method. The design procedure is subjected to many constraints controlling the designed sections (beams and columns) based on the standard specifications of the American Concrete Institute ACI Code 2011. The design variables have contained the dimensions of designed sections, reinforced steel and topology through the section. It is obtained from a predetermined database containing all the single reinforced design sections for beam and columns subjected to axial load, uniaxial or biaxial moments. The designed optimum beam sections by using GAs have been unified through MATLAB to satisfy axial, flexural, shear and torsion requirements based on the designed code. The frames' functional cost has contained the cost of concrete and reinforcement of steel in addition to the cost of the frames' formwork. The results have found that limiting the dimensions of the frame's beams with the frame's columns have increased the optimum cost of the structure by 2%, declining the re-analysis of the optimum designed structures through GA.

• International Journal of Internet, Broadcasting and Communication
• /
• v.11 no.1
• /
• pp.69-74
• /
• 2019

The compiler is the key of the prototyping framework for the new memory system. These compiler-centric prototyping tools have several components, including compiler, linker, assembler, and standard libraries. It takes a lot of cost and man power to develop it all at zero base. Therefore, developer usually use a development framework to develop these prototyping tools efficiently. These development frameworks should be free of licensing issues when considering the commercialization of development results. Thus, developer should investigate the development framework, which is free from licensing issues and that provides all of the development environment to enable actual execution. There are three representative compiler-centric development frameworks: GCC, Clang (LLVM), and MS visual studio. There are some differences depending on the release version among them. And, there are some limitations to the freeware and commercial use. We chose LLVM here to explain the development of prototyping tools. This information will help accelerate the development of prototyping tools and will help reduce system development costs.

• The Journal of the Korea Contents Association
• /
• v.12 no.11
• /
• pp.446-457
• /
• 2012

Recently, BIM(Building Information Modeling),which has been an issue in construction work, has been focused on as a new alternative of building industry for way out of crisis by slowing down and decreasing of orders in construction industry. Research for introducing BIM to the architectural field is already proceeding actively at home and abroad. However, civil engineering is so nonrecurring, horizontal, and different from regular construction works that it a large amount of information occurs because of wide range of project, which causes construction firms and design engineers to have some questions whether their initial investment cost would work or not and feel uncomfortable with the cost. In this study, technology level in engineering firms were surveyed for adapting BIM to domestic civil engineering. Development direction of BIM standard information model was drawn through awareness change analysis of BIM in civil engineering, as well. Deduced development direction is composed of guide development, system development, deliverable check and international standard proposal. The outcome will be employed as preliminary data for the study on development of infrastructure BIM standard and deliverable check system in civil engineering.

• Journal of Korean Society for Atmospheric Environment
• /
• v.3 no.1
• /
• pp.47-54
• /
• 1987

A new method for designing air pollution monitoring newtork is presented in this study. In this method, the magnitudes and the correlation coefficients of predicted concentrations in each grid points are examined and the monitoring stations are assigned to those stations which cover the damage cost the most. This method was applied to the Ulsan-Onsan Industrial Complex. This method turned out to be much more efficient than the method of TM coordinates and the method of concentric circles prescribed in the Standard Methods for Pollution Measurement as well as the existing monitoring system established in the area. The 21 stations selected by the method of TM coordinates could cover only 64.4% of the damage cost in the area, the 16 stations by the method of concentric circles 72.1%, and the existing 21 stations 67.8%, while 11 stations were enough to cover 90% of the damage cost in the area with this method. It also was found that this method required only 24 stations to cover the entire area.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2002.09a
• /
• pp.492-494
• /
• 2002

We established the job classification method that a classification standard is clear, and can subdivide job by using the raw data of time-and-motion study performed to analyze the medical staffs job elements. The final target of this study is to optimize job allocation and calculate human cost of medical staffs in hospitals.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.27 no.9_10
• /
• pp.1160-1171
• /
• 2003

This study is intended to examine the current situation and the problems of the "worksheets, regarding various factors that exert influences onto the quality-risk management, which is one of the most significant factors specifying an apparel product. This paper advances according to the following sequences: 1. Literature survey 2. Field research on actual "apparel vendors" and production factories 3. Investigating the requirements relating to the worksheet 4. Developing standard format of the worksheet 5. Effectiveness analysis on the standard worksheet 6. Proposal of an intelligent model applying standard worksheet system. This study is performed with the following research methods; those are questionnaire surveys, statistical analysis, interviews, collecting & analyzing worksheets, product sample quality experiment, functional analysis of the system, and materialization of the prototype system. The significance of this research is that it suggests the possible effective use of worksheet, which reflects the customers' needs in terms of the product quality, at the stage of the product planning process. Despite its importance, the current work structure does not visibly reflect these components. Therefore, with the result of this research, it is considered that the worksheet systems will meet more useful improvements in risk management process. The limitations of this research are as follows. Although it is evident that the standard worksheets bring effective results in quality improvements of products, considerations must be made onto some additional payoffs arising from the additional cost of necessary labor forces with expert knowledge and cost of the effort and time inputting correct information for running the system.

• Journal of radiological science and technology
• /
• v.41 no.6
• /
• pp.595-602
• /
• 2018

Quality control (QC) of Computed Tomography (CT) devices is based on image quality measurement on AAPM CT phantom which is a standard phantom. Although it is possible to control the accuracy of the CT apparatus, it is expensive and has a disadvantage of low penetration rate. Therefore, in this study, we make image quality measurement phantom at low cost using FFF (Fused Filament Fabrication) type three-dimensional printer and try to analyze the usefulness, compare it with existing standard phantom. To print a phantom, We used three-dimensional printer of the FFF system and PLA (Poly Lactic Acid, density: $1.24g/cm^3$) filament, and the CT device of 64 MDCT (Aquilion CX, Toshiba, Japan). In addition, we printed a phantom using three-dimensional printer after design using various tool based on existing standard phantom. For image quality evaluation, AAPM CT phantom and self-generated phantom were measured 10 times for each block. The measured data were analyzed for significance using the Mannwhiteney U-test of SPSS (Version 22.0, SPSS, Chicago, IL, USA). As a result of the analysis, phantom fabricated with three-dimensional printer and standard phantom showed no significant difference (p>0.05). Furthermore, we confirmed that image quality measurement performance of a phantom using three-dimensional printer is similar to the existing standard phantom. In conclusion, we confirmed the possibility of low cost phantom fabrication using three dimensional printer.