• 약학회지
• /
• 제19권4호
• /
• pp.240-245
• /
• 1975

The quantitative analysis of ethambutol.2HCl as well as commercial ehambutol preparations was undertaken by gas-liquid chromatography by finding optimum conditions, such as the use of internal standard, stability of an ethambutol-2HCl-caffeine standard solution, and the effect of column temperature, N, O-bis-(trimethylsily) acetamide [B.S.A.] concentrations and other substances present in the preparations. Under the chromatiographic conditions, an ethambutol-2HCl. caffeine standard, 9 min, 30sec. The relative molar response of ethambutol.2HCl and caffeine studied was 2.08. Ethambutol.2HCl could be quantitated up to 1$\times$10$^{-8}$ moles. the possible decomposition of B.S.A. due to the moisture when tested and the incoplete reaction for silylation could be minimized.

• 호남수학학술지
• /
• 제8권1호
• /
• pp.21-49
• /
• 1986

A class of singular quadratic control problem is considered. The state is governed by a higher order system of ordinary linear differential equations and very general nonstandard boundary conditions. These conditions in many important cases reduce to standard boundary conditions and because of the conditions the usual controllability condition is not needed. In the special case where the coefficient matrix of the control variable in the cost functional is a time-independent singular matrix, the corresponding optimal control law as well as the optimal controller are computed. The method of investigation is based on the theory of least-squares solutions of multi-valued operator equations.

• 한국실내디자인학회논문집
• /
• 제13권6호
• /
• pp.167-174
• /
• 2004

The purpose of this study is to examinethe present illumination conditions in office environment and to suggest an efficient illumination plan in office planning process. Illumination conditions in work environment were surveyed in 6 offices to investigate whether the present illumination conditions were appropriate to the work type. The results of this study are as follows: Most of the general Illuminance level in the area of work were all at an adequate level, except one. The average Illuminance level in the all meeting rooms were met for the standard. Illuminance in the all reception area were extremely over the standard, The illuminations of this area were rather designed according to the image of the company than the standard. As for the illumination method in the area of general work, four offices used a general lighting by a direct lighting type, while two offices used a general lighting and a task lighting at the same time. This survey suggested that first, each company should consider illumination plan in the building planning process, second, illumination plan considering the type of places is needed, and third, illumination environment may be differentiated according to the work type. In conclusion, efficient illumination environment should be considered in office building planning process, especially In terms of illumination materials and methods.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2009년도 동계학술발표회 논문집
• /
• pp.293-294
• /
• 2009

The spectral responsivity of solar cells has been measured under high background irradiance using an LED-based differential spectral responsivity Comparator (DSR-C). The comparator developed is fully automated and has some advantages: It does not need a chopper to modulate the light. Unlike the conventional method, it does not require a monochromator to select wavelength. It covers a wavelength range up to 1200 nm. The wavelength range of the comparator is limited by the spectral power distribution of the LEDs and the spectral responsivity of the standard detector. An active temperature control was utilized to meet the specified standard conditions of solar cell test. This work shows the effect of different levels of background irradiance on the spectral responsivity and the importance of same background irradiance for solar cell test as specified by the corresponding standard.

• Journal of the Korean Data and Information Science Society
• /
• 제9권2호
• /
• pp.305-310
• /
• 1998

In this paper, we introduce the conditions that the P-process has the intensity function which it is a standard form of gamma distribution. And we show that the transformed geometric Poisson process which the intensity function is a standard form of gamma distribution is a alternative sign P-process

• 유통과학연구
• /
• 제20권4호
• /
• pp.101-110
• /
• 2022

Purpose: This study is a comparative study to examine the differences between Incoterms 2010 and Incoterms 2010 through a study on the revision contents and conditions of Incoterms 2020. Research design, data, methodology: This study is composed of 5 chapters through literature study. Chapter 1 is an introduction, and Chapter 2 explains the significance and change of standard trading conditions. Chapter 3 compares Incoterms 2020 and 2010. Chapter 4 deals with major revisions and considerations of Incoterms 2020, and Chapter 5 mentions conclusions and implications. Results: In comparison with Incoterms 2020 and Incoterms 2010, first, the selection of the correct Incoterms rules was emphasized through the introduction; second, the division and connection between the sale contract and the ancillary contract were more clearly explained; and third, each Incoterms An explanatory note was presented by improving the existing guidance note for rules, and finally, the order of clauses within individual Incoterms rules was changed to further emphasize delivery and risk. Conclusions: This study pays attention to the understanding of academic content related to standard trade terms and conditions and how usefully it can be used in the business process of users in practice.

• 설비공학논문집
• /
• 제29권9호
• /
• pp.482-495
• /
• 2017

Degree-days are practically used as a tool to estimate energy consumption for heating and cooling. Degree-days are calculated by summing differences of balance point temperature and outside temperature for the analyzed period. Determining balance point temperature is a key point in calculating accurate degree-days. However, ASHRAE standards are used for balance point temperature in Korea because balance point temperature considering climate conditions and building thermal performance is not proposed in Korea. This study proposes the process to generate balance point temperature for heating degree-days considering Korean climate and building conditions. Also, a new balance point temperature for three regions in Korea will be suggested in this study. Balance point temperature of Seoul is approximately $15.0^{\circ}C$, lower than the current standard of $18.3^{\circ}C$. Balance point temperature of Seoul considering climate conditions and building performance can be different from the ASHRAE suggested value ($18.3^{\circ}C$). Results revealed the current standard for balance point temperature should be changed considering climate and building conditions in Korea.

• 대한조선학회논문집
• /
• 제50권2호
• /
• pp.88-94
• /
• 2013

The primary objective of the current work is to obviously analyze regarding effects of trim conditions of a ship on resistance performance using model test and CFD. Model tests at a towing tank are conducted to investigate resistance for trim conditions at the given same displacement. Measured resistance shows small but distinct differences according to trim conditions. However, these differences are difficult to be clarified by measured physical quantities and wave pattern analysis from model tests. CFD is employed for the assessment of resistance performance according to trim conditions. The flow computation is conducted considering free surface and dynamic trim using a commercial CFD code (STAR-CCM+). The initiative of the present work is to systematically demonstrate pressure resistance acting on each region of divided finite zones of ship surface along the length and draught direction of surface when pressure distribution on the ship is interpreted. Also, a standard to assess the pressure resistance applied on the divided regions of a ship is established.

• 한국가스학회지
• /
• 제7권4호
• /
• pp.20-23
• /
• 2003

공정설비의 신뢰도분석은 자주 Weibull 분포에 기초를 둔 모델을 사용한다. 여기에 사용되는 매개변수들은 조업조건의 함수로서 실험에 의해 값이 결정되며 이를 토대로 신뢰도, 평균수명 및 표준편차를 계산한다 이때 기존 방법은 조업조건이 일정하다고 가정하고 이 매개변수들을 상수로 취급한다. 본 논문에서는 척도모수가 시간의 함수일 때 적용할 수 있는 신뢰도함수 및 이를 토대로 한 분석기법을 제안한다. 냉각팬에 대한 사례연구 결과 평균조업조건을 적용한 기존 방법과 큰 차이를 보였다. 제안된 방법은 다른 공정설비들에도 적용 가능하며 조업조건변화가 설비신뢰도에 미치는 영향을 효과적으로 고려할 수 있을 것으로 기대된다.

• 한국건설순환자원학회논문집
• /
• 제6권3호
• /
• pp.182-189
• /
• 2018

본 연구에서는 공사 시 발생하는 현장 굴착토를 활용한 하수관용 유동화 뒤채움재의 실용화 기술개발의 일환으로서 현장 굴착토를 모사한 표준토 종류별에 따른 CLSM의 배합요인별 유동성, 재료분리 저항성, 조기강도 및 재굴착강도 등의 공학적 특성을 검토하였다. 연구결과 카올리나이트, 황토, 주문진사를 이용하여 국내 토질을 대표하는 SM, ML, CL, CH 등의 대표토질을 구현할 수 있는 재료간 혼합비율을 도출하였다. 또한 CLSM의 유동성 및 조기압축강도에 가장 큰 영향을 미치는 요인은 W/B 및 S/B인 것으로 분석되었으며, 표준토 종류별에 따라 소요 유동성 및 조기강도를 만족시키는 범위가 매우 상이한 것으로 나타났다. 또한 유동성 및 초기강도를 확보할 수 있는 W/B 및 S/B를 적용한 표준토 종류별 CLSM의 재료분리저항성 및 재굴착성 평가를 통해 도출된 배합비율에 대한 유효성을 확인할 수 있었으며, 이를 통해 표준토 종류별에 따른 CLSM의 적정 배합비율을 도출하였다.