• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.6 no.2
• /
• pp.155-162
• /
• 2008

Inventories to be disposed of, reference turnup, and source terms for CANDU spent fuel were evaluated for geological disposal system design. The historical and projected inventory by 2040 is expected to be 14,600 MtU under the condition of 30-year lifetime for unit 1 and 40-year lifetime for other units in Wolsong site. As a result of statistical analysis for discharge burnup of the spent fuels generated by 2007, average and stand deviation revealed 6,987 MWD/MtU and 1,167, respectively. From this result, the reference burnup was determined as 8,100 MWD/MtU which covers 84% of spent fuels in total. Source terms such as nuclide concentration for a long-term safety analysis, decay heat, thermo-mechanical analysis, and radiation intenity and spectrum was characterized by using ORIGEN-ARP containing conservativeness in the aspect of decay heat up to several thousand years. The results from this study will be useful for the design of storage and disposal facilities.

• Journal of Korean Society of Forest Science
• /
• v.101 no.1
• /
• pp.138-147
• /
• 2012

For biomass estimation of Phyllostachys pubescens stands by optimal survey method we established 9 bamboo sample plots in the research forests of KFRI (Korea Forest Research Institute). The dry weight of culm segment determined by relative heights of total bamboo height show us two groups of 1st to 5th culm segment (up to 0~55% culm of tree height from the bottom area) and 6th to 8th culm segment (55~100%) by the results of cluster analysis for dry weight ratio. This results show that upper and lower part of 55~70% reference height from the bottom area against total culm height can be used in obtaining 1 kg of a sample bamboo, respectively, rather than 2.0 m stem segments of other forest tree species. In above-ground biomass estimation by $W=aD+bD^2$ having the highest coefficient of determination in this study, above ground stand biomass was 57.77 ton/ha (culm 40.47 ton/ha, branch 9.29 ton/ha, and leaf 8.01 ton/ha) of which 70% was contributed by culm component followed by branch (16%) and leaf (14%). Below-ground biomass was 53.35 ton/ha in total.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.21 no.1
• /
• pp.27-34
• /
• 2015

Heating patterns depending on the packaging materials were examined in order to investigate the causes of thermal deformation of packages used for ready-to-eat foods for microwave heating due to the non-uniformity of microwaves. Physical properties including tensile strength, heat-resistance and elongation of four different CPP grades were compared. High retortable CPP had higher sealing strength and heat resistance compared to the conventional CPPs. All CPP samples tested were proved to have melting temperatures around $160^{\circ}C$. However, they were all thermally deformed by microwave heating due to a limited penetration of microwave and non-uniform heating within the spicy sauce of high viscosity contained high salt, especially on the above the filling line and sealing edge of pouches. When the laminated stand-up pouches composed of G-PET/PET/PET/CPP and G-PET/PET/NY/CPP were retorted and microwaved, significant deformations were noticed in both samples after retorting. Besides, pouches contained titanium dioxide showed more intense thermal deformation than the control. When the $10{\mu}m$ aluminium foil was affixed on the pouch, small thermal deformation was observed only in the bottom layer. More studies are required to prevent the thermal deformation of packaging materials used for RTE foods during microwave heating by developing the technologies to increase the thermal stability of CPP layer and the modification of packaging design to modify the microwave access into the package.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.12 no.3
• /
• pp.95-111
• /
• 2004

This research sought to determine the status of the installation and operation of composting facilities of domestic public resource-making facilities and come up with corresponding improvement measures. The composting facilities were the most extensively installed of related facilities with over a 0.5 ton treated volume per day. The monthly and yearly carry-in volume of food waste were found to stand at 1,101.7 tons per day and 930.9 tons per day, thus falling short of the average planned volume of 1,270.9 tons. Many composting facilities, which were installed in areas for which factory registration were not approved, did not get approvals. Composting facilities underwent operation stoppage mainly due to faulty fermentation and crushing equipment. Mainly metals contained in food waste caused faults to the crushing equipment, thus requiring a facility designing against faults and corrosion. The initial water content was found to stand at 50-60%, thus complying with the requirement. However, since the composting food waste had an appropriate mixture of sawdust, food waste, and returned compost, it should meet the initial conditions. For fermentation facilities, the duration time for fermentation was 15 days, and post-fermentation tanks required 21 days of duration time, thus establishing the minimum criteria. However, some facilities did not meet the requirements, taking more time in decomposition, thus suggesting a need to determine the duration time according to facilities. In composting food waste, microorganism-based thermal oxidizer-operated fermentation tanks should be used to ensure an economic operation. On the contrary, 14 out of 25 survey targets heated fermentation tanks in any form. These thermal facilities contain the growth of bacteria, lowering chemical reaction in composting; thus composting facilities should be basically designed to use microorganism-based thermal oxidizers in drying water. An average daily volume of food waste and supplementary materials that was injected in producing compost was 22.8 tons. This volume produced 7.3 tons of compost per day, decreasing 68%. Properties of produced compost were analyzed by its color, absence or presence of remaining decomposition heat, and smell, to assess the quality. As a result, the composting process was not properly installed nor operated in about 50% of composting facilities. Compost should be produced to be soil-friendly.

• Journal of Technology Innovation
• /
• v.11 no.1
• /
• pp.147-176
• /
• 2003

This Paper Presents a new measurement technique to derive the level of BSRC (Basic Science and Research Capacity) index by use of the factor analysis which is extended with the assumption of the standard normal probability distribution of the selected explanatory variables. The new measurement method is used to forecast the gap of Korea's BSRC level compared with those of major OECD countries in terms of time lag and to make their international comparison during the time period of 1981∼1999, based on the assumption that the BSRC progress function of each country takes the form of the logistic curve. The US BSRC index is estimated to be 0.9878 in 1981, 0.9996 in 1990 and 0.99991 in 1999, taking the 1st place. The US BSRC level has been consistently the top among the 16 selected variables, followed by Japan, Germany, France and the United Kingdom, in order. Korea's BSRC is estimated to be 0.2293 in 1981, taking the lowest place among the 16 OECD countries. However, Korea's BSRC indices are estimated to have been increased to 0.3216 (in 1990) and 0.44652 (in 1999) respectively, taking 10th place. Meanwhile, Korea's BSRC level in 1999 (0.44652) is estimated to reach those of the US and Japan in 2233 and 2101, respectively. This means that Korea falls 234 years behind USA and 102 years behind Japan, respectively. Korea is also estimated to lag 34 years behind Germany, 16 years behind France and the UK, 15 years behind Sweden, 11 years behind Canada, 7 years behind Finland, and 5 years behind the Netherlands. For the period of 1981∼1999, the BSRC development speed of the US is estimated to be 0.29700. Its rank is the top among the selected OECD countries, followed by Japan (0.12800), Korea (0.04443), and Germany (0.04029). the US BSRC development speed (0.2970) is estimated to be 2.3 times higher than that of Japan (0.1280), and 6.7 times higher than that of Korea. German BSRC development speed (0.04029) is estimated to be fastest in Europe, but it is 7.4 times slower than that of the US. The estimated BSRC development speeds of Belgium, Finland, Italy, Denmark and the UK stand between 0.01 and 0.02, which are very slow. Particularly, the BSRC development speed of Spain is estimated to be minus 0.0065, staying at the almost same level of BSRC over time (1981 ∼ 1999). Since Korea shows BSRC development speed much slower than those of the US and Japan but relative]y faster than those of other countries, the gaps in BSRC level between Korea and the other countries may get considerably narrower or even Korea will surpass possibly several countries in BSRC level, as time goes by. Korea's BSRC level had taken 10th place till 1993. However, it is estimated to be 6th place in 2010 by catching up the UK, Sweden, Finland and Holland, and 4th place in 2020 by catching up France and Canada. The empirical results are consistent with OECD (2001a)'s computation that Korea had the highest R&D expenditures growth during 1991∼1999 among all OECD countries ; and the value-added of ICT industries in total business sectors value added is 12% in Korea, but only 8% in Japan. And OECD (2001b) observed that Korea, together with the US, Sweden, and Finland, are already the four most knowledge-based countries. Hence, the rank of the knowledge-based country was measured by investment in knowledge which is defined as public and private spending on higher education, expenditures on R&D and investment in software.

• Korean Journal of Construction Engineering and Management
• /
• v.15 no.1
• /
• pp.11-19
• /
• 2014

The Construction industry is a labor-intensive industry that its labor cost takes up about 30~40% out of the whole construction cost. However, due to a stereotype that on-site work is a 3D job there is a shortage of the labor forces. Modular construction method is to produce modular units in the plant so that workers could work stably. Also, after delivering the module from plant to the site, there will be only installment to be required that shortens construction duration. Even though the modular market is currently expanding based on military facilities in Korea, its best strengths are not demonstrated well which are shortened construction period and low cost. It also causes labor problem of production due to minimum utilization of the modular construction method. Multi-skilled labor means a technician that is able to perform more than two kinds of work with more than two techniques. Multi-skilled labor can proceed smoothly by figuring out the connectivity between the precedent and following operations. Therefore, this research is to apply the concept of Multi-skilled labors, suggest solutions and allocate manpowers efficiently. As a result, it helps to decrease idle manpowers during the operation and the total labor forces can be saved. Low cost is the original strength of the modular which can stand out so the modular market is expected to expand.

• The Journal of the Korea Contents Association
• /
• v.12 no.10
• /
• pp.254-279
• /
• 2012

This research aims to suggest a practical solution in order to make marriage immigrant women free from violence and stand on their own. The suggestion could be made by developing Substantive theory in terms of marriage immigrant women's coping with domestic violence. The research question is; How marriage immigrant women cope with domestic violence. The research used a route theory approach, and 11 of marriage immigrant women who have ever suffered from domestic violence participated in it. The research question used semi-structured open questions. As a result of paradigm model analysis, "mental and physical devastation" is defined as a core phenomenon, and causative conditions are "wheel of pain" and "helpless victims of violence". Besides, context conditions are "period growth with solitariness", "irrational marriage" and "indifferent reality". "Mental and physical devastation", the core phenomenon act and interact with effect of mediatory conditions; which are "social help", "cultural difference" and "helplessness". Here the action and reaction appear as "adaptation", "resistance", "self-protection" and "self-reinforcement", and the outcomes show up as "maintaining reality", "decision making" and "beginning a new life". "Coping with mental and physical devastation and standing on one's own feet" could be introduced as a core category. Process of coping with domestic violence presents its levels as; shocks ${\rightarrow}$ endurance ${\rightarrow}$ regret ${\rightarrow}$ overcoming. There are three patterns of coping, which are; "preserving realities", "returning", and "groping for the future".

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.14 no.6
• /
• pp.1-9
• /
• 2019

Since 2005, Korea Venture Investment Corp. (KVIC) has been managing Korean Fund of Funds (KFoF) which helped greatly the domestic venture capitals create their private funds. Its contribution, however, is not limited fetching the pump. When KFoF decides to invest in VC funds, it demands very strict rules the VC funds need to follow before and after their investments in private equities. Whether this tight control of investments does hinder GPs' creativity or rather enhance GPs' transparency and professionalism is an open question subject to empirical tests. If KFoF is only fetching the pump, and neither fund size or time horizon improves VC funds' return rates, then KFoF's involvement in VC funds should not be positively related to VC funds' return rates. If, on the other hand, KFoF harms GPs' creativity, KFoF's involvement should be negatively related to VC funds' performances. Still, if KFoF promotes GPs' transparency and professionalism, its presence in VC funds should positively affect the returns earned by VC funds. Even when KFoF only got to get quality VC funds because those GPs good enough to stand up to the tight conditions set forth by KFoF, the empirical implication will yield the same results. In this article, empirical tests are carried out using the data provided by Korea Venture Capital Association. The VC funds formed and liquidated from 2000 to 2018 are selected for the tests. The results show that VC funds with the presence of KFoF exceed VC funds without KFoF in returns, which supports the hypothesis that KFoF enhances transparency and professionalism of VC funds.

• Korean Journal of Environment and Ecology
• /
• v.24 no.2
• /
• pp.178-185
• /
• 2010

The purpose of this study is to verify the effectiveness of the biotope model in applying and developing Korean urban forests. We found that there are 17 biotope assessment indicators, including forest layer structure, site conditions, ratio of broad-leaved trees, species richness, etc. In terms of correlation analysis between indicators, the stand ages and the period of space formation have the highest relativity(coefficient 0.684). On the other hand, indicators that have negative relativity are layer structure and risk, with a coefficient of -0.412. Ten models were developed for the multiple regression analysis. 10 variables(site conditions(X2), ratio of broad-leaved trees(X3) and so forth except layer structure(X1), species richness(X4)) were found to have a 95% significance level The results from comparing the regression model and adding-up estimation matrix, the most accurate one was Model 3, which has a 91.7% out of the 10 models. However more monitoring will be needed to improve the accuracy of models for the Korean urban forests in future.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.590-592
• /
• 2018

Taxis that are illegally parked on the road to catch customer can cause traffic congestion and sometimes cause traffic accidents. Stop position of taxis is determined by the long term experience of taxi drivers. In this study, We provide information to taxi drivers and customer who visit in first time through finding stop position of taxis by time. To do this, we used the Internet of Vehicle (IoV) data collected from sensors installed in 40 taxis. Previous studies attempted by forming a cluster around a taxi. Since this method is centered on a taxi, the position of the cluster changes depending on the location of the taxi. In this study, we use a road segmentation algorithm to solve these problems. Unlike the previous studies, since the cluster is formed around the road, the position of the cluster is fixed and it is not affected by the number of taxis, so it is possible to grasp the stop position in real time. The road segmentation is made up of 30m units, and map the taxi location data divided into hourly, weekday, and weekend to the nearest point. As a result of the mapping, it was difficult to see a big difference in the time of week because there were few taxis to operate on weekends, but in case of weekdays, the difference of stop position between the commute time zone and the night time zone was confirmed. The results of this study suggest that it will be possible to propose the prevention of taxi illegally driving taxi and the location of the taxi stand.